Huafone HF-803A User manual

Model HF-803A (KIT 3-Gen 2)
Huafone Technology reserves the rights to update pictures, specifications, and design shown here at any time without further notice.
Page 1of 2HF-803A (version 1.2)
®
QUICK START
1. Connect substation (outside loud speaker) to OUT on
master station, using extension wires (provided).
2. Plug power supply to POWER on master station, turn on
master station.
3. Press + Hold master station BT Pair button, Bluetooth light (upper
right corner) blinks quickly (blue red), ready for pairing.
4. Press + Hold wireless headset On/Off button until ‘Bluetooth is
connected’is heard over headset. System is ready for use.
NOTE: Repeat the Steps 3 & 4
if Bluetooth connection is not
established.
Call Huafone technical support at
[phone] if you still have
troubles setting up system.

Model HF-803A (KIT 3-Gen 2)
Huafone Technology reserves the rights to update pictures, specifications, and design shown here at any time without further notice.
Page 2of 2HF-803A (version 1.2)
®
INSTALLATION AND OPERATION INSTRUCTION
1.Volume control of substation( VOL)
2.Volume control of master station( VOL)
3.Master station speaker indicator light
4.Substation speaker indicator light
5.Bluetooth microphone mute (MIC1)
6.Bluetooth pairing button (BT Pair)
7.Power switch (Power)
8.Power indicator light
9.Bluetooth status indicator light
10.Jack to substation (OUT)
11.Internal MIC jack (MIC.)
12.Record jack(REC.)
13.Power jack (POWER)
Installation
1.Install master station and substation. Plug the
substation wire into the jack 10 (OUT).
2.Connect the power transformer to an 110V power
source and to the power jack 13 (POWER).
3.Press the power switch 7 to turn on the power
indicator light 8; the unit is in normal working status.
4.Press internal MIC1 switch 5 and Bluetooth button.
The two green lights indicate a two-way duplex
communication is now established.
Monitor, Talk-In, Record (Optional)
1. Connect In-Store-Communication (ISC) Kitchen
Master Station to jack 12 (REC) on master station.
Talk-in conversation cannot be heard by customers on the substations (used by staff members to
monitor, train, or talk to POS window person).
2. Connect digital recording system (optional) to jack 12 (REC) to record, where law permits.