Huawei VTR-L09 User manual

Quick Start Guide
Guide de démarrage rapide
Schnellstartanleitung
Guida di avvio rapido
Snelstartgids
Guia de Início Rápido
Guía de inicio rápido
VTR-L09 VTR-L29
VKY-L09 VKY-L29

Contents
English............................................................................ 1
Français........................................................................ 13
Deutsch.........................................................................27
Italiano......................................................................... 41
Nederlands................................................................... 54
Português..................................................................... 67
Español......................................................................... 80
i

Getting started
Inserting the SIM Card
Insert the SIM card into the slot with its chip side facing down
and the notched side facing out.
micro-SIM (3FF)
mini-SIM (2FF) nano-SIM (4FF)
Remove the back cover to view the default Wi-Fi® name
(SSID) and password (Wi-Fi Key).
Powering on the Mobile WiFi
Press and hold the Power button to power on the Mobile WiFi.
Your Mobile WiFi searches for wireless signals automatically
after it is powered on.
English
1

Green: Strong signal
Yellow: Weak signal
Red: No Internet access
Refer to the FAQs section below if the Signal indicator on
your Mobile WiFi is red or yellow.
Accessing the Internet
Connect your device to the Mobile WiFi to access the Internet.
Remove the back cover to view the default Wi-Fi name (SSID)
and password (Wi-Fi Key).
SSID: XXXXXX-XXXX
WIFI KEY: XXXXXXXX
xxxxxxxx
Refer to the FAQs section below if you cannot access the
Internet after you have connected to your Mobile WiFi.
Device Management
Using app: You may scan the QR code below to download
HUAWEI SmartHome App to manage your Mobile WiFi, for
example, changing your Wi-Fi name or password, or checking
data usage.
2

If you cannot add device in the app, please check if you
are using the latest version.
Using browser: Enter 192.168.8.1 into the browser on your
mobile phone or computer to go to your Mobile WiFi's web-
based management page. The default login password is
admin.
lIf you cannot visit the web-based management page,
check whether your mobile phone or computer is
connected to your Mobile WiFi.
lWe suggest that you modify the default Wi-Fi name
and password, and the default login password to
ensure that your data is secure.
Charging
Red: Low battery power. Please charge your Mobile
WiFi.
3

Please use the original Huawei charging cable and power
adapter.
The power adapter is an optional accessory that you can
purchase from retailers.
Appearance
Signal indicator SMS indicator
Battery indicator Power button
Reset button SIM card slot
To power off the Mobile WiFi: Press and hold the Power
button until all indicators turn off.
To restore the Mobile WiFi to its factory settings: Use a
pin to press and hold the Reset button while your Mobile WiFi
is powered on. When all indicators start to ash, the reset is
complete.
4

FAQs
What should I do if the Signal indicator on my
Mobile WiFi is red and I do not have Internet
access?
lMake sure that the SIM card is the right size and inserted
correctly into the slot.
lConrm that your SIM card has sufcient balance. If your
SIM card is new, ensure that it has Internet access.
lThe PIN verication feature may have been enabled. 1)
Open the HUAWEI SmartHome App, and go to
Advanced Settings > PIN Management to enter the
correct PIN code. 2) Disable this feature if you don't want to
enter your PIN on a regular basis.
lIf the issue persists, restore your Mobile WiFi to its factory
settings and try again.
What should I do if the Signal indicator on my
Mobile WiFi is yellow, the signal strength is
weak, or the network speed is slow?
lMove your Mobile WiFi closer to a window or use it in an
open area to receive better signal.
lHowever, if your mobile phone receives good signal
strength at the same spot where your Mobile WiFi is placed,
restore your Mobile WiFi to its factory settings and try
again.
Refer to the Appearance section above to restore your
Mobile WiFi to its factory settings.
What should I do if I can't connect to my Mobile
WiFi after a period of inactivity?
Your Mobile WiFi may be in sleep mode or powered off.
lPress the Power button on your Mobile WiFi. If indicators
light up, your Mobile WiFi was in sleep mode. In this mode,
your Mobile WiFi automatically disables Wi-Fi to save
5

power. You can disable the sleep mode through the
HUAWEI SmartHome App.
lIf there is no response after you press the Power button,
your Mobile WiFi is powered off. Press and hold the Power
button to power it back on.
Avoid using your Mobile WiFi where active wireless
devices are prohibited (such as during ights), and ensure
that it is powered off.
Why can't I access the web-based management
page by entering 192.168.8.1 on my browser?
This is likely due to an IP address conict when the Mobile
WiFi assigns itself a new IP address. Please try entering
192.168.9.1 and see if this resolves the issue.
6

Safety information
Copyright © Huawei Technologies Co., Ltd.
2018. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND
DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.
LTE is a trademark of ETSI.
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are
trademarks of Wi-Fi Alliance.
Privacy Policy
To better understand how we use and protect your personal
information, please read the Privacy Policy at http://
consumer.huawei.com/privacy-policy.
Software Update
By continuing to use this device, you indicate that you have
read and agree to the following content:
In order to provide better service, this device will automatically
obtain software update information from Huawei or your
carrier after connecting to the Internet. This process will use
mobile data, and requires access to your device's unique
identier (IMEI/SN) and the service provider network ID (PLMN)
to check whether your device needs to be updated.
In addition, this device supports the automatic downloading
and installation of important updates from Huawei or your
carrier in cases of emergency. This function is enabled by
default. To disable this function, please log in to the product
management website and make the corresponding changes in
the settings menu.
Safety information
lSome wireless devices may affect the performance of
hearing aids or pacemakers. Consult your service provider
for more information.
lPacemaker manufacturers recommend that a minimum
distance of 15 cm be maintained between a device and a
7

pacemaker to prevent potential interference with the
pacemaker. If using a pacemaker, hold the device on the
side opposite the pacemaker and do not carry the device in
your front pocket.
lIdeal operating temperatures are 0 °C to 35 °C. Ideal
storage temperatures are -10 °C to +45 °C. Extreme heat or
cold may damage your device or accessories.
lKeep the device and accessories in a well-ventilated and
cool area away from direct sunlight. Do not enclose or
cover your device with towels or other objects. Do not
place the device in a container with poor heat dissipation,
such as a box or bag.
lKeep the device away from sources of heat and re, such as
a heater, microwave oven, stove, water heater, radiator, or
candle.
lUsing an unapproved or incompatible power adapter,
charger or battery may cause re, explosion or other
hazards.
lChoose only accessories approved for use with this model
by the device manufacturer. The use of any other types of
accessories may void the warranty, may violate local
regulations and laws, and may be dangerous. Please
contact your retailer for information about the availability of
approved accessories in your area.
lFor pluggable devices, the socket-outlet shall be installed
near the devices and shall be easily accessible.
lEnsure that the charger meets the requirements of Clause
2.5 in IEC60950-1/EN60950-1/UL60950-1 and has been
tested and approved according to national or local
standards.
lKeep the battery away from excessive heat and direct
sunlight. Do not place it on or in heating devices, such as
microwave ovens, stoves, or radiators. Batteries may
explode if overheated.
lDo not attempt to modify or remanufacture the battery,
insert foreign objects into it, or immerse or expose it to
8

water or other liquids. Doing so may lead to re, explosion,
or other hazards.
lDispose of used batteries in accordance with local
regulations. Improper battery use may lead to re,
explosion, or other hazards.
Disposal and recycling information
The crossed-out wheeled-bin symbol on your product, battery,
literature or packaging reminds you that all electronic products
and batteries must be taken to separate waste collection
points at the end of their working lives; they must not be
disposed of in the normal waste stream with household
garbage. It is the responsibility of the user to dispose of the
equipment using a designated collection point or service for
separate recycling of waste electrical and electronic equipment
(WEEE) and batteries according to local laws.
Proper collection and recycling of your equipment helps ensure
electrical and electronic equipment (EEE) waste is recycled in a
manner that conserves valuable materials and protects human
health and the environment, improper handling, accidental
breakage, damage, and/or improper recycling at the end of its
life may be harmful for health and environment. For more
information about where and how to drop off your EEE waste,
please contact your local authorities, retailer or household
waste disposal service or visit the website http://
consumer.huawei.com/en/.
Reduction of hazardous substances
This device and its electrical accessories are compliant with
local applicable rules on the restriction of the use of certain
hazardous substances in electrical and electronic equipment,
such as EU REACH, RoHS and Batteries (where included)
regulations. For declarations of conformity about REACH and
9

RoHS, please visit our web site http://consumer.huawei.com/
certication.
EU regulatory conformance
RF exposure requirements
Important safety information regarding radio frequency (RF)
radiation exposure:
RF exposure guidelines require that the device be used at a
minimum of 0.5 cm from the human body. Failure to observe
this guideline may result in RF exposure exceeding limits.
Certication information (SAR)
This device meets guidelines for exposure to radio waves.
Your device is a low-power radio transmitter and receiver. As
recommended by international guidelines, the device is
designed not to exceed the limits for exposure to radio waves.
These guidelines were developed by the International
Commission on Non-Ionizing Radiation Protection (ICNIRP), an
independent scientic organization, and include safety
measures designed to ensure the safety of all users, regardless
of age and health.
The Specic Absorption Rate (SAR) is the unit of measurement
for the amount of radio frequency energy absorbed by the
body when using a device. The SAR value is determined at the
highest certied power level in laboratory conditions, but the
actual SAR level during operation can be well below the value.
This is because the device is designed to use the minimum
power required to reach the network.
The SAR limit adopted by Europe is 2.0 W/kg averaged over 10
grams of tissue, and the highest SAR value for this device
complies with this limit.
Statement
Hereby, Huawei Technologies Co., Ltd. declares that this device
E5783B-230 is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
The most recent and valid version of the DoC (Declaration of
Conformity) can be viewed at http://consumer.huawei.com/
certication.
10

This device may be operated in all member states of the EU.
Observe national and local regulations where the device is
used.
This device may be restricted for use, depending on the local
network.
Restrictions in the 2.4 GHz band:
Norway: This subsection does not apply for the geographical
area within a radius of 20 km from the centre of Ny-Ålesund.
Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, the
packaging shows that this radio equipment will be subject to
some restrictions when placed on the market in Belgium (BE),
Bulgaria (BG), the Czech Republic (CZ), Denmark (DK),
Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES),
France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV),
Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT),
Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT),
Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden
(SE), the United Kingdom (UK), Turkey (TR), Norway (NO),
Switzerland (CH), Iceland (IS), and Liechtenstein (LI).
The WLAN function for this device is restricted to indoor use
only when operating in the 5150 to 5350 MHz frequency
range.
Frequency Bands and Power
(a) Frequency bands in which the radio equipment operates:
Some bands may not be available in all countries or all areas.
Please contact the local carrier for more details.
(b) Maximum radio-frequency power transmitted in the
frequency bands in which the radio equipment operates: The
maximum power for all bands is less than the highest limit
value specied in the related Harmonized Standard.
The frequency bands and transmitting power (radiated and/or
conducted) nominal limits applicable to this radio equipment
are as follows: WCDMA 900/2100: 25.7 dBm, LTE Band
1/3/7/8/20/28/32/38/40: 25.7 dBm, Wi-Fi 2.4G: 20 dBm, Wi-Fi
11

5G: 5150-5350 MHz: 23 dBm; Wi-Fi 5G: 5470-5725 MHz: 30
dBm.
Accessories and Software Information
Some accessories are optional in certain countries or regions.
Optional accessories can be purchased from a licensed vendor
as required. The following accessories are recommended:
Adapters: HW-050100X01 (X represents the different plug
types used, which can be either C, U, J, E, B, A, I, R, Z or K,
depending on your region)
Batteries: HB434666RBC
The product software version is 8.0.1.1(H190SP9C00).
Software updates will be released by the manufacturer to x
bugs or enhance functions after the product has been
released. All software versions released by the manufacturer
have been veried and are still compliant with the related
rules.
All RF parameters (for example, frequency range and output
power) are not accessible to the user, and cannot be changed
by the user.
For the most recent information about accessories and
software, please see the DoC (Declaration of Conformity) at
http://consumer.huawei.com/certication.
Please visit http://consumer.huawei.com/en/support/hotline for
recently updated hotline and email address in your country or
region.
12

Mise en route
Insertion de la carte SIM
Insérez la carte SIM dans le logement avec la puce orientée
vers le bas et le côté biseauté vers l'extérieur.
micro-SIM (3FF)
mini-SIM (2FF) nano-SIM (4FF)
Retirez le cache à l'arrière pour voir le nom du Wi-Fi®
(SSID) et le mot de passe par défaut (Wi-Fi Key).
Mise sous tension du Mobile WiFi
Appuyez et maintenez le Bouton d'alimentation pour mettre
sous tension le Mobile WiFi. Votre Mobile WiFi recherche des
signaux sans l automatiquement après sa mise sous tension.
Français
13

Vert : Signal fort
Jaune : Signal faible
Rouge : Aucune connexion Internet
Référez-vous à la section Questions fréquentes ci-dessous
si le Témoin du signal sur votre Mobile WiFi est rouge ou
jaune.
Accès à Internet
Connectez votre appareil au Mobile WiFi pour accéder à
Internet. Retirez le cache à l'arrière pour voir le nom du (SSID)
et le mot de passe (Wi-Fi Key).
SSID: XXXXXX-XXXX
WIFI KEY: XXXXXXXX
xxxxxxxx
Référez-vous à la section Questions fréquentes ci-dessous
si vous ne pouvez pas accéder à Internet après vous être
connecté à votre Mobile WiFi.
Gestion des appareils
Utilisation de l'application : Vous pouvez scanner le QR
code ci-dessous pour télécharger HUAWEI SmartHome App
pour gérer votre Mobile WiFi, par exemple, modier le nom de
votre Wi-Fi ou mot de passe, ou vérier l'utilisation des
données.
14

Si vous ne pouvez pas ajouter d'appareil à l'application,
veuillez vérier si vous utilisez la dernière version.
Utilisation du navigateur : Saisissez 192.168.8.1 dans le
navigateur sur votre téléphone portable ou votre ordinateur
pour aller sur la page de gestion basée sur Internet de votre
Mobile WiFi. Par défaut, le mot de passe de connexion est
admin.
lSi vous ne pouvez pas aller sur la page de gestion
basée sur Internet, vériez si votre téléphone portable
ou votre ordinateur est connecté à votre Mobile WiFi.
lNous vous suggérons de modier le nom du Wi-Fi et le
mot de passe par défaut, ainsi que le mot de passe de
connexion par défaut pour garantir la sécurité de vos
données.
Chargement
Rouge : Niveau de batterie bas. Veuillez charger
votre Mobile WiFi.
15

Veuillez utiliser le câble de charge et l'adaptateur
d'alimentation Huawei d'origine.
L'adaptateur d'alimentation est un accessoire optionnel
que vous pouvez acheter auprès des revendeurs.
Apparence
16

Témoin du signal Témoin SMS
Témoin de la
batterie Bouton d'alimentation
Bouton de
réinitialisation Logement de carte SIM
Pour mettre hors tension le Mobile WiFi : Appuyez et
maintenez le Bouton d'alimentation jusqu'à ce que les témoins
s'éteignent.
Pour restaurer les paramètres d'usine du Mobile WiFi :
Utilisez une épingle pour appuyer et maintenir le Bouton de
réinitialisation pendant que votre Mobile WiFi est sous tension.
Lorsque tous les témoins commencent à clignoter, la
réinitialisation est terminée.
Questions fréquentes
Que faire si le Témoin du signal sur mon Mobile
WiFi est rouge et que je n'ai pas accès à
Internet ?
lAssurez-vous que la carte SIM fait la bonne taille et qu'elle
est insérée correctement dans le logement prévu à cet effet.
lConrmez que le solde est sufsant sur votre carte SIM. Si
votre carte SIM est neuve, vériez qu'elle a accès à Internet.
lLa vérication du code PIN pourrait avoir été activée. 1)
Ouvrez HUAWEI SmartHome App, et allez dans
Paramètres avancés (Advanced Settings) > Gestion du
code PIN (PIN Management) pour saisir le bon code. 2)
Désactivez cette fonctionnalité si vous ne voulez pas saisir
votre code régulièrement.
lSi le problème persiste, rétablissez les paramètres d'usine de
votre Mobile WiFi et réessayez.
17