Huawei WS331c User manual

Quick Start
WS331c 300Mbps Wireless Range Extender
Kurzanleitung
Démarrage rapide
Avvio rapido
Início rápido
Guía de inicio rápido
Snelstartgids

Contents
English--------------------------------------------------------------------------------------------------1
Deutsch ------------------------------------------------------------------------------------------------13
Français ------------------------------------------------------------------------------------------------20
Italiano -------------------------------------------------------------------------------------------------27
Português ---------------------------------------------------------------------------------------------34
Español-------------------------------------------------------------------------------------------------41
Nederlands--------------------------------------------------------------------------------------------48

1
Step 1: Connect the WS331c to your router's Wi-Fi network.

Connect the WS331c to a power outlet near your router.
Press the WPS buttons on the WS331c and router within 2 minutes of each other.
The indicator on the WS331c then blinks. When the indicator is steady on, the WS331c is connected to your
router's Wi-Fi network.
Method 1: Using the WPS button (This method is recommended if your router provides the WPS function.)
The WPS button name and
connection method may
vary slightly by router. For
details, see your router's
user guide.
1
2

2
SSID:
WLAN Key:
Method 2: Using a phone (Use this method if your router does not provide the WPS function.)
Check the SSID and WLAN Key on the label
affixed to the back of the WS331c. Connect
the WS331c to a power outlet near your router.
Then use the SSID and WLAN key to connect
the phone to the WS331c's Wi-Fi network.
Using your phone's browser, visit 192.168.33.1 or
mediarouter.home and log in with the password
admin.
Touch Configuration. Follow the onscreen instructions
to complete the settings.
1 2
3
You can configure the WS331c using a phone, tablet, or laptop. This guide uses a phone as an example.

3
Step 2: Move the WS331c to a suitable location.
The WS331c indicator light will change colors based on its location.
(Steady white: in a suitable location. Steady orange: too close or too far from the router.)
Wi-Fi coverage
area of the router
Wi-Fi coverage area
extended by the WS331c
By default, the SSID and WLAN key of the Wi-Fi network extended by the WS331c are automatically
synchronized with the router's Wi-Fi network SSID and WLAN key.
Now the WS331c has extended your router's Wi-Fi network.

4
FAQs
Q: After I use the WS331c to extend a Wi-Fi network, I cannot access the WS331c's web management page using the
192.168.33.1 address. What can I do?
A: You can use the mediarouter.home address instead.
Q: After I use the WS331c to extend a Wi-Fi network, my device fails to find the WS331c's Wi-Fi network. What can I
do?
A: By default, the SSID and WLAN key of the Wi-Fi network extended by the WS331c are automatically synchronized
with the router's Wi-Fi network SSID and WLAN key. You can search for the router's Wi-Fi network and connect your
device to it.
Q: How can I restore the WS331c to its default settings?
A: When the WS331c is powered on, use the end of a paper clip to press and hold the Reset key for 2 seconds or more
until the indicator blinks.
?

5
This section contains important information about the operation of your device. It also contains information about how to use
the device safely. Read this information carefully before using your device.
Electronic device
>Do not use your device if using the device is prohibited. Do not use the device if doing so causesdanger or interference with
other electronic devices.
Interference with medical equipment
>Follow rules and regulations set forth by hospitals and health care facilities. Do not use yourdevice where prohibited.
>Some wireless devices may affect the performance of hearing aids or pacemakers. Consultyour service provider for more
information.
>Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker
to prevent potential interference with the pacemaker. Ifusing a pacemaker, hold the device on the side opposite the
pacemaker and do not carry thedevice in your front pocket.
Areas with flammables and explosives
>Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example).
Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated
in text or symbols.
>Do not store or transport the device in containers with flammable liquids, gases, or explosives.
Safety information

6
Operating environment
>Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these environments may result in circuit
malfunctions.
>Before connecting and disconnecting cables, stop using the device and disconnect it from the power supply. Ensure that
your hands are dry during operation.
>During thunderstorms, power off your device and remove all cables connected to it to protect against lightning strikes.
>Do not use your device during thunderstorms to protect your device against any danger caused by lightning.
>Ideal operating temperatures are 0°C to 40°C. Extreme heat or cold may damage your device or accessories.
>Keep the device and accessories in a well-ventilated and cool area away from direct sunlight. Do not enclose or cover your
device with towels or other objects. Do not place the device in a container with poor heat dissipation, such as a box or bag.
>To protect your device or accessories from fire or electrical shock hazards, avoid rain and moisture.
>Keep the device away from sources of heat and fire, such as a heater, microwave oven, stove, water heater, radiator, or
candle.
>Observe local laws and regulations, and respect the privacy and legal rights of others.
>Do not block device openings. Reserve a minimum of 10 cm around the device to dissipate heat.
>Stop using your device or applications for a while if the device is overheated. If skin is exposed to an overheated device for
an extended period, low temperature burn symptoms, such as red spots and darker pigmentation, may occur.
>Do not touch the device's antenna. Otherwise, communication quality may be reduced.
>Do not allow children or pets to bite or suck the device or accessories. Doing so may result in damage or explosion.
>The device should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
>Keep the device in a place with good reception. The distance between the device and othermetal materials (such as metal
brackets or metal doors and windows) should be greater than 25 cm and the distance between the device should be greater