Huawei OptiXstar EN8245X6s-8N User manual

Huawei OptiXstar EN8245X6s-8N
Quick Start for QR code
Issue 02
Date 2022-12-14
HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2022. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every eort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: https://www.huawei.com
Email: [email protected]
Issue 02 (2022-12-14) Copyright © Huawei Technologies Co., Ltd. i

Contents
1 Placing the Device................................................................................................................... 1
2 Connecting Cables................................................................................................................... 3
3 Indicator Description.............................................................................................................. 5
4 Technical Specications......................................................................................................... 8
5 FAQs............................................................................................................................................ 9
Huawei OptiXstar EN8245X6s-8N
Quick Start for QR code Contents
Issue 02 (2022-12-14) Copyright © Huawei Technologies Co., Ltd. ii

1 Placing the Device
NO TE
● Do not install the ONT outdoors or in an outdoor cabinet.
● The ONT can be mounted onto a wall or placed on a desk. Do not install the ONT in
other modes, such as ceiling.
● Keep 10 cm clearance on all sides to ensure adequate ventilation.
● It is recommended that the computer and ONT be put far away from electric appliances
that generate strong magnetic or electric elds, such as microwave ovens.
Mounting an ONT on the desk
The gure below shows an ONT that is horizontally placed on a desk.
Huawei OptiXstar EN8245X6s-8N
Quick Start for QR code 1 Placing the Device
Issue 02 (2022-12-14) Copyright © Huawei Technologies Co., Ltd. 1

NO TE
The appearance shown in this document may be dierent from the actual appearance of
the product. The actual product prevails.
Huawei OptiXstar EN8245X6s-8N
Quick Start for QR code 1 Placing the Device
Issue 02 (2022-12-14) Copyright © Huawei Technologies Co., Ltd. 2

2 Connecting Cables
NO TE
● The ber connector connected to the optical port on the wall varies depending on
actual conditions.
● To ensure normal use of bers, make sure that the ber bending radius is larger than 30
mm.
Huawei OptiXstar EN8245X6s-8N
Quick Start for QR code 2 Connecting Cables
Issue 02 (2022-12-14) Copyright © Huawei Technologies Co., Ltd. 3

No. Item Description
1 Reset Press the button for a short time to reset
the device, or press the button for a long
time (longer than 10s) to restore the
device to the default settings and reset the
device.
NOTE
Reset Huawei ONTs with caution. Otherwise,
the ONTs may fail to access the Internet. If an
ONT cannot access the Internet after a reset,
contact your Internet service provider.
2 TEL1-TEL2 Connects to the ports on a telephone or
fax machine.
3 LAN1-LAN3/2.5G LAN Connects to PCs or IP set-top boxes (STBs).
4 USB Connects to USB storage devices.
5On/O Powers the ONT on or o.
6 Power Connects to a power adapter.
7 Optical port The optical port is equipped with a rubber
plug and connected to a ber for upstream
transmission.
The type of the optical connector
connected to the optical port can be SC/
APC.
NOTE
Before the optical ber is connected to the
optical port on the ONT, remove the ber port
cover on the ONT in the arrow direction, lead
the ber out of the ONT through the hole on
the ber port cover, and then install the ber
port cover to the ONT.
8 WPS When the WLAN is on, press the WPS
button (> 3s) and release the button to
start Wi-Fi protected setup (WPS)
negotiation.
9 WLAN Used to enable or disable the WLAN
function.
● When the WLAN is o, press the WLAN
button (> 3s) and release the button to
open the WLAN.
● When the WLAN is on, press the WLAN
button (> 3s) and release the button to
close the WLAN.
Huawei OptiXstar EN8245X6s-8N
Quick Start for QR code 2 Connecting Cables
Issue 02 (2022-12-14) Copyright © Huawei Technologies Co., Ltd. 4

3 Indicator Description
Indicator Status Description
Power Steady on The ONT is powered on.
O The power supply is cut o.
Huawei OptiXstar EN8245X6s-8N
Quick Start for QR code 3 Indicator Description
Issue 02 (2022-12-14) Copyright © Huawei Technologies Co., Ltd. 5

Indicator Status Description
PON/LOS See the following table.
LAN1-
LAN3/2.5G
LAN
Steady on The Ethernet connection is in the normal state.
Blinking Data is being transmitted over the Ethernet port.
O The Ethernet connection is not set up.
TEL1-TEL2 Steady on The ONT is registered with the softswitch but no
service ows are transmitted.
Blinks twice
a second
The ONT is registered with the softswitch, and
data is being transmitted on the port.
Blinks once
every 2
seconds
The ONT fails to be registered with the softswitch.
O The POTS port is disabled.
USB Steady on The USB port is connected and working in the
host mode, but no data is transmitted.
Blinking Data is being transmitted on the USB port.
O The system is not powered on or the USB port is
not connected.
WLAN Steady on The WLAN function is enabled.
Blinking Data is being transmitted over the WLAN port.
O The WLAN function is disabled.
WPS Steady on The WPS function is enabled.
Blinking A Wi-Fi terminal is accessing the system.
O The WPS function is disabled.
Status
No.
PON Status LOS Status Description
1O O The ONT is prohibited by the upper-layer
device or blinks abnormally. Contact the
service provider for help.
2 Blinks twice
a second
Blinks twice
a second
3 Blinks twice
a second
O The ONT attempts to set up a connection
with its upper-layer device.
4 Steady on O A connection is set up between the ONT
and its upper-layer device.
Huawei OptiXstar EN8245X6s-8N
Quick Start for QR code 3 Indicator Description
Issue 02 (2022-12-14) Copyright © Huawei Technologies Co., Ltd. 6

Status
No.
PON Status LOS Status Description
5O Blinks once
every 2
seconds
The ONT is not connected to bers or
does not receive optical signals.
6 Blinks once
every 2
seconds
Blinks once
every 2
seconds
The hardware is faulty.
NO TE
If the ONT is not powered on or the power switch is turned o, all indicators are o.
Huawei OptiXstar EN8245X6s-8N
Quick Start for QR code 3 Indicator Description
Issue 02 (2022-12-14) Copyright © Huawei Technologies Co., Ltd. 7