Huawei SSC2132T Technical specifications

SSC2132T/SSC2132
ODN V100R007C02
Product Description
Issue
01
Date
2012-7-15
HUAWEI TECHNOLOGIES CO., LTD.

Issue 01 (2012-7-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i
Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address:
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:
http://www.huawei.com
Email:
[e-mail]

SSC2132T/SSC2132
Product Description
Contents
Issue 01 (2012-7-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii
Contents
1 Positioning........................................................................................................................................... 1
2 Features................................................................................................................................................. 2
3 Product Overview .............................................................................................................................. 3
3.1Appearance.......................................................................................................................................................3
3.2 Structure...........................................................................................................................................................4
3.3 Optical Splitter.................................................................................................................................................6
3.4 Splicing Tray....................................................................................................................................................7
3.5 Fittings for Sealing and Securing Optical Cables.............................................................................................7
3.6 Aerial Accessories ..........................................................................................................................................10
4 Application Scenarios and Configurations............................................................................... 12
4.1 Overview........................................................................................................................................................12
4.2 Configurations and Routing...........................................................................................................................13
5 Technical Specifications ................................................................................................................ 17
6 Acronyms and Abbreviations ....................................................................................................... 20

SSC2132T/SSC2132
Product Description
1 Positioning
Issue 01 (2012-7-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1
1 Positioning
Mounted to the aerial optical cable the SSC2132T/SSC2132 free-breathing aerial closure
(aerial closure for short) is mainly used in the fiber to the home-optical distribution network
(FTTH-ODN) for optical splitting, distribution, branching connection, and straight-through
storage. Figure 1-1 shows the position of the aerial closure in a network.
Figure 1-1 Position of the aerial closure

SSC2132T/SSC2132
Product Description
2 Features
Issue 01 (2012-7-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
2 Features
Flexible Configuration
Various optical splitters
Multiple split ratios
Multiple splicing capacities
Different cable diameters
Various drop cables
Convenient Construction
Tool-free closure opening or closing
Tool-free drop cable securing
Maintenance without tools
Large operation space
Clear Routing
Separated straight-through area and other areas by a flap
Separated cable distribution area and splicing area
Reliable Protection
IP54 protection rating
Anti-ultraviolet (UV), anti-corrosion and anti-mildew material for the closure housing

SSC2132T/SSC2132
Product Description
3 Product Overview
Issue 01 (2012-7-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3
3 Product Overview
3.1 Appearance
The appearance of SSC2132 series aerial closure is the same as that of SSC2132T series,
Figure 3-1 shows the appearance of the aerial closure.
Figure 3-1 Appearance of the aerial closure
1. Closure housing
2. Buckle
The closure housing is made of anti-UV, anti-corrosion and anti-mildew
high-performance plastic, meeting outdoor application requirements.
The closure housing is buckled and can be opened or closed without any tools,
facilitating construction.
The closure housing supports an opening angle over 180 degrees, providing large
operation space.
The aerial closure has four buckles at the front and two breathing holes at the rear. Figure 3-2
shows the breathing holes.

SSC2132T/SSC2132
Product Description
3 Product Overview
Issue 01 (2012-7-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
Figure 3-2 Breathing hole and grounding port
1. Breathing hole
2. Grounding port
The breathing holes are covered with metal grids, with a slice of sponges inside. The
design helps prevent dust.
After the aerial closure is installed, its breathing holes appear at the bottom. The closure
also provides an internal flow guiding trough, effectively preventing condensation.
3.2 Structure
Function
With its modular design, the aerial closure can be configured with different function modules
to achieve different functions. Table 3-1 lists the functions of the aerial closure.
Table3-1 Functions of the aerial closure
Model
SSC2132T Series
SSC2132 Series
Function module configured
Bracket-mounted optical
splitter
Splicing tray
Bare optical splitter
Splicing tray
Function
Optical splitting
Cable distribution
Straight-through
Optical splitting
Splicing
Straight-through
SSC2132T Series
Figure 3-3 shows the structure of the SSC2132T series aerial closure.

SSC2132T/SSC2132
Product Description
3 Product Overview
Issue 01 (2012-7-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
Figure 3-3 Structure of the SSC2132Tseries aerial closure
1. Holes for
common cables
2. Pressure plate for
drop cables
3. Bracket-mounted
optical splitter
4. Installation position of device for fixing
and stripping protection of optical cables
5. Flap
6. Splicing tray
7. Straight-through area
8. Fiber block pole
The aerial closure provides a splicing tray under the flap, and the splicing tray is used to
splice and store the input ends of optical splitters and the pigtails.
The operation space in the straight-through area is large enough for the coiled
straight-through cables, facilitating storage of straight-through cables.
SSC2132 Series
The structure of the SSC2132 series aerial closure is similar to that of SSC2132T series. The common
components of these two series are not described here.
Figure 3-4 shows the structure of the SSC2132 series aerial closure.

SSC2132T/SSC2132
Product Description
3 Product Overview
Issue 01 (2012-7-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
Figure 3-4 Structure of the SSC2132 series aerial closure
1. Splicing tray
2. Bare optical splitter
The aerial closure provides a splicing tray under the flap.
Splicing trays are buckled together, ensuring reliable connections and also facilitating
removal.
3.3 Optical Splitter
The aerial closure supports the SPL2803 bracket-mounted optical splitter and the SPL9102
bare optical splitter. Figure 3-5 shows the appearance of such optical splitters.
Figure 3-5 Appearance of optical splitters
1. SPL2803 bracket-mounted optical splitter
SPL9102 bare optical splitter
Table 3-2 describes the configuration principles of optical splitters.

SSC2132T/SSC2132
Product Description
3 Product Overview
Issue 01 (2012-7-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
Table3-2 Configuration principles of optical splitters
Closure model
SSC2132T
SSC2132
Splitter model
SPL2803
SPL9102
Split Ratio
1:4
1:8
1:16
1:4
1:8
Maximum Number of
Optical Splitters
4
4
2
6
6
3.4 Splicing Tray
Figure 3-6 shows the appearance of the splicing tray.
Figure 3-6 Splicing tray (with an bare optical splitter)
1. SPL9102 bare optical splitter
Each splicing tray supports a maximum of 24 cores.
The splicing tray can integrate an SPL9102 bare optical splitter.
The splicing tray can route cables from four directions, the routing is flexible.
The splicing tray has a large space for storing optical fibers.
3.5 Fittings for Sealing and Securing Optical Cables
Cable Hole
The aerial closure has four cable holes on the right side and four on the left side, leading in
eight optical cables. The cable holes are sealed with gaskets. Figure 3-7 shows the appearance
of cables holes on the aerial closure.