Huawei B593 Reference guide

Online Help
Huawei Proprietary and C
onfidential
Copyright © Huawei Technologies Co., Ltd
Welcome to the LTE CPE!
Online Help

Online Help
Huawei Proprietary and C
onfidential
Copyright © Huawei Technologies Co., Ltd
Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and
possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble,
decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are
prohibited by applicable laws or such actions are approved by respective copyright holders under licenses.
Trademarks and Permissions
, , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective owners.
Notice
Some features of the product and its accessories described herein rely on the software installed, capacities and
settings of local network, and may not be activated or may be limited by local network operators or network
service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained
in this manual without prior notice or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUALARE PROVIDED "AS IS". EXCEPTAS REQUIRED BY APPLICABLE
LAWS, NO WARRANTIES OFANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A
PARTICULAR PURPOSE,ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BYAPPLICABLE LAW, IN NO CASE SHALLHUAWEI
TECHNOLOGIES CO., LTD BE LIABLE FORANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR
ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary
governmental permits and licenses in order to export, re-export or import the product mentioned in this manual
including the software and technical data therein.
Copyright Notice
To view more details about the copyright notice of this product, please visit URL:
http://consumer.huawei.com/minisite/copyright_notice/ or contact: [e-mail].

Online Help
Contents
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd i
Contents
1 Getting Started...............................................................................................................................1
1.1 Welcome to the CPE.........................................................................................................................................1
1.2 Computer Configuration Requirements ...........................................................................................................1
1.3 Logging In to the Web Management Page .......................................................................................................1
2 Home................................................................................................................................................3
2.1 Overview..........................................................................................................................................................3
2.1.1 Viewing the Internet Status .....................................................................................................................3
2.1.2 Viewing the Internet Usage.....................................................................................................................3
2.1.3 Viewing the Wi-Fi Status ........................................................................................................................3
2.1.4 Viewing the LAN Usage .........................................................................................................................3
2.1.5 Viewing the Antenna Status ....................................................................................................................4
2.2 Product Information .........................................................................................................................................4
2.2.1 Viewing the Product Information............................................................................................................4
2.2.2 Viewing the Device List..........................................................................................................................4
2.3 Quick Setup......................................................................................................................................................4
2.4 Update..............................................................................................................................................................5
2.4.1 Updating on Local...................................................................................................................................5
2.4.2 Updating Online......................................................................................................................................5
2.4.3 Updating Using CWMP..........................................................................................................................6
3 Internet............................................................................................................................................7
3.1 Network Connection ........................................................................................................................................7
3.1.1 Selecting a Network Mode......................................................................................................................7
3.1.2 Selecting a Connection Mode .................................................................................................................7
3.1.3 Selecting an APN Profile ........................................................................................................................8
3.1.4 Selecting PDP Type.................................................................................................................................8
3.1.5 Setting Data Roaming.............................................................................................................................8
3.2 APN Management............................................................................................................................................8
3.3 PIN Management .............................................................................................................................................9
3.3.1 Viewing the Status of the USIM Card.....................................................................................................9
3.3.2 Enabling PIN Verification.....................................................................................................................10
3.3.3 Disabling PIN Verification....................................................................................................................10
3.3.4 Verifying the PIN ..................................................................................................................................10
3.3.5 Changing the PIN..................................................................................................................................10
3.3.6 Setting Automatic Verification of the PIN ............................................................................................ 11
3.3.7 Verifying the PUK................................................................................................................................. 11
3.4 Setting the Internet MTU ............................................................................................................................... 11

Online Help
Contents
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd ii
4 LAN................................................................................................................................................12
4.1 Setting LAN Host Parameters........................................................................................................................12
4.2 Configuring the DHCP Server........................................................................................................................12
4.3 Bundled Address List.....................................................................................................................................13
5 Wi-Fi ..............................................................................................................................................15
5.1 Wi-Fi Settings.................................................................................................................................................15
5.1.1 Setting General Parameters...................................................................................................................15
5.1.2 Setting SSID Profile..............................................................................................................................15
5.2 Access Management.......................................................................................................................................17
5.2.1 Setting the Access Policy......................................................................................................................17
5.2.2 Managing the Wi-Fi Access List...........................................................................................................17
5.3 WPS Settings..................................................................................................................................................18
5.4 Wi-Fi Multi-SSID Settings.............................................................................................................................19
5.5 Advanced Settings..........................................................................................................................................20
5.6 WDS...............................................................................................................................................................20
6 Security..........................................................................................................................................22
6.1 Setting Firewall Level....................................................................................................................................22
6.2 MAC Filtering................................................................................................................................................22
6.2.1 Managing MAC Address Whitelist.......................................................................................................22
6.2.2 Managing MAC Address Blacklist .......................................................................................................23
6.3 URL Filtering.................................................................................................................................................23
6.3.1 Managing URL Whitelist......................................................................................................................24
6.3.2 Managing URL Blacklist ......................................................................................................................24
6.4 IP Filtering......................................................................................................................................................25
6.4.1 Managing IP Address Whitelist.............................................................................................................25
6.4.2 Managing IP Blacklist...........................................................................................................................26
6.5 Setting Service Access Control ......................................................................................................................26
6.6 Setting ALG ...................................................................................................................................................26
6.7 Setting Port Forwarding .................................................................................................................................27
6.8 Setting UPnP..................................................................................................................................................28
6.9 Setting DMZ...................................................................................................................................................28
7 Services..........................................................................................................................................29
7.1 Setting DDNS.................................................................................................................................................29
7.2 SMS Management..........................................................................................................................................29
7.2.1 Viewing SMS Messages........................................................................................................................29
7.2.2 Sending SMS Messages........................................................................................................................29
7.2.3 Saving SMS Messages..........................................................................................................................30
7.2.4 Forwarding SMS Messages ..................................................................................................................30
7.2.5 Replying to SMS Messages ..................................................................................................................30
7.2.6 Deleting SMS Messages .......................................................................................................................30

Online Help
Contents
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd iii
7.3 Setting SMS ...................................................................................................................................................31
7.4 Setting FTP Server .........................................................................................................................................31
7.5 Setting Samba Server .....................................................................................................................................31
7.6 Setting DLNA Server .....................................................................................................................................32
7.7 Configuring User Settings..............................................................................................................................32
7.8 Viewing USB Storage ....................................................................................................................................33
8 VoIP ...............................................................................................................................................34
8.1 Viewing VoIP Information..............................................................................................................................34
8.2 Configuring a SIP Server ...............................................................................................................................34
8.3 Configuring a SIP Account.............................................................................................................................35
8.4 Managing Speed Dial.....................................................................................................................................35
8.5 Setting Advanced SIP Parameters ..................................................................................................................36
8.6 Setting Advanced Voice Parameters...............................................................................................................37
8.7 Setting Advanced Codec Parameters..............................................................................................................37
9 System ...........................................................................................................................................39
9.1 Maintenance...................................................................................................................................................39
9.1.1 Restart...................................................................................................................................................39
9.1.2 Reset......................................................................................................................................................39
9.1.3 Downloading a Configuration File........................................................................................................39
9.1.4 Uploading a Configuration File ............................................................................................................40
9.2 Changing the Password..................................................................................................................................40
9.3 Setting the Date and Time ..............................................................................................................................40
9.4 Diagnosis........................................................................................................................................................41
9.4.1 Ping.......................................................................................................................................................41
9.4.2 Traceroute .............................................................................................................................................41
9.4.3 System Check........................................................................................................................................41
9.4.4 Checking the Wireless Status................................................................................................................42
9.5 Logs................................................................................................................................................................42
9.6 System Notification........................................................................................................................................42
9.7 Setting TR-069...............................................................................................................................................43
9.8 Setting Antenna ..............................................................................................................................................43
10 FAQs ............................................................................................................................................44
11 Acronyms and Abbreviations.................................................................................................45

Online Help
1 Getting Started
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 1
1 Getting Started
1.1 Welcome to the CPE
In this document, the LTE (Long Term Evolution) CPE (customer premises equipment) will
be replaced by the CPE. Carefully read the following safety symbols to help you use your
CPE safely and correctly:
Additional information
Optional methods or shortcuts for an action
Potential problems or conventions that need to be specified
1.2 Computer Configuration Requirements
For optimum performance, make sure your computer meets the following requirements.
Item Requirement
CPU Pentium 500 MHz or higher
Memory 128 MB RAM or higher
Hard disk 50 MB available space
Operating system Microsoft: Windows XP, Windows Vista, or Windows 7
Mac: Mac OS X 10.5 or higher
Display resolution 1024 x 768 pixels or higher
Browser Internet Explorer 7.0 or later
Firefox 3.6 or later
Opera 10 or later
Safari 5 or later
Chrome 9 or later
1.3 Logging In to the Web Management Page
Use a browser to log in to the web management page to configure and manage the CPE.
The following procedure describes how to use a computer running Windows XP and Internet
Explorer 7.0 to log in to the web management page of the CPE.

Online Help
1 Getting Started
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 2
1. Connect the CPE properly.
2. Launch Internet Explorer, enter http://192.168.1.1 in the address bar, and press Enter.
3. Enter the user name and password, and click Log In.
You can log in to the web management page after the password is verified.
To protect your CPE from unauthorized access, change the password after your first
login.
The CPE supports diagnostic function. If you encounter problems, please contact
customer service for the specific using method.
Please change the default WiFi password as soon as possible.
To ensure your data safety, it is recommended that you turn on the firewall, and
conserve your login, WiFi and FTP password carefully.
---End

Online Help
2 Home
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 3
2 Home
2.1 Overview
2.1.1 Viewing the Internet Status
To view the Internet connection status, perform the following steps:
1. Choose Home > Overview.
2. In the Internet Status area, view the Internet status, such as USIM card status, Network
mode, and IP address.
----End
2.1.2 Viewing the Internet Usage
To view the network data usage, perform the following steps:
1. Choose Home > Overview.
2. In the Internet Usage area, view the network data usage, including total traffic, uplink and
downlink traffic volumes, uplink and downlink rates, and time spent online.
----End
2.1.3 Viewing the Wi-Fi Status
To view the Wi-Fi network connection status, perform the following steps:
1. Choose Home > Overview.
2. In the Wi-Fi Status area, view the following information.
View the Wi-Fi network connection status, including the SSID, IP Address, MAC Address,
Broadcast mode, and Wireless Encryption mode.
View the statistics of the Wi-Fi network, including the total traffic, packets, erroneous packets,
and discarded packets transmitted and received over the Wi-Fi network.
----End
2.1.4 Viewing the LAN Usage
To view the local area network (LAN) connection status, perform the following steps:
1. Choose Home > Overview.
2. In the LAN Usage area, view the following information.

Online Help
2 Home
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 4
View the LAN status, such as IP address, MAC address, DHCP server.
View the statistics of the LAN, including the total traffic, packets, erroneous packets, and
discarded packets transmitted and received over the LAN.
----End
2.1.5 Viewing the Antenna Status
To view the antenna status, perform the following steps:
1. Choose Home > Overview.
2. In the Antenna area, view the antenna status.
----End
2.2 Product Information
2.2.1 Viewing the Product Information
To view the basic product information, perform the following steps:
1. Choose Home > Product Information.
2. In the Product Information area, view the basic information about the CPE.
For example, the name, serial number (SN), international mobile equipment identity (IMEI).
----End
2.2.2 Viewing the Device List
To view the device list, perform the following steps:
1. Choose Home > Product Information.
2. In the Device List area, view the information about the devices, such as Computer Name,
MAC Address, IP Address, and Lease Time.
Lease Time indicates the remaining lease duration of the dynamic DHCP server. If a static IP
address is bundled with the device, Lease Time and Computer Name are N/A and Unknown
respectively.
----End
2.3 Quick Setup
The setup wizard guides you to configure the most important settings of the CPE. After the
configurations are complete, the CPE can access the Internet.
To configure the CPE, perform the following steps:
1. Choose Home > Quick Setup.

Online Help
2 Home
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 5
2. Click Next to view and set Internet connection parameters.
3. Click Next to view and set Wi-Fi-related parameters, including Wi-Fi, Country/Region,
Mode, Channel, SSID, and Hide SSID broadcast.
4. Click Next to view and set Wi-Fi security-related parameters, such as Security.
The displayed parameters vary depending on the Security setting. For example, if Security is
set to WPA-PSK&WPA2-PSK,then WPA-PSK and WPA encryption are displayed and
must be set.
5. Click Next to view the settings you just configured.
6. Click Submit for the settings to take effect.
----End
2.4 Update
This function enables you to upgrade the software version of the CPE to the latest version. It
is recommended that you update the software because in the new version, certain bugs have
been fixed and the system stability is usually improved.
2.4.1 Updating on Local
To perform a local upgrade successfully, connect the CPE to your computer through Wi-Fi or
a network cable, save the upgrade file on the computer, and make sure the CPE is not
connected to anything other than a power adapter and the computer.
To perform a local upgrade, perform the following steps:
1. Choose Home > Update.
2. In the Local Update area,click Browse.
In the displayed dialog box, select the target software version file.
3. Click Open.
The dialog box closes. The save path and name of the target software version file are
displayed in the Update file field.
4. Click Update.
During an upgrade, do not power off the CPE or disconnect it from the computer.
5. Click OK.
The software upgrade starts. After the upgrade, the CPE automatically restarts and runs the
new software version.
----End
2.4.2 Updating Online
To perform an online upgrade successfully, make sure the CPE is connected to the Internet.
To perform an online upgrade, perform the following steps:

Online Help
2 Home
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 6
1. Choose Home > Update.
2. Click Check to detect the latest version.
After updates are found, the CPE retains the server address and informs you if any
subsequent updates are found on the server.
If... Then...
Updates are found. Go to step 3.
Updates are not found. The upgrade ends.
3. Click Update to download the updates.
After downloading the updates, the CPE automatically upgrades and restarts.
A message is displayed, indicating that the upgrade is complete. Then, the login dialog box is
displayed.
During an upgrade, do not disconnect the power supply or operate the CPE.
---End
2.4.3 Updating Using CWMP
To update the CPE software using the CPE WAN Management Protocol (CWMP), perform
the following steps:
1. Choose Home > Update.
2. Click CWMP Update.
---End

Online Help
3 Internet
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 7
3 Internet
3.1 Network Connection
3.1.1 Selecting a Network Mode
To select a network mode for the CPE, perform the following steps:
Insert a valid USIM card into the CPE.
Power on the CPE, and then log in to the web management page as the admin user.
1. Choose Internet > Network Connection.
2. Set Network mode to one of the following values:
Value Description
Auto The CPE automatically selects its working mode, with an order of preference
of 4G, 3G and 2G.
4G The CPE accesses 4G networks only.
3G The CPE accesses 3G networks only.
2G The CPE accesses 2G networks only.
3. Click Submit.
----End
3.1.2 Selecting a Connection Mode
To select a network connection mode, perform the following steps:
1. Choose Internet > Network Connection.
2. Set Connection mode.
Value Description
Always on If the conditions permit, the CPE automatically connects to the Internet.
When roaming, accessing the network automatically may incur
additional charges.
Manual The CPE disconnects from the Internet upon startup. You can connect or
disconnect the CPE to or from the Internet manually.
3. Click Submit.
----End

Online Help
3 Internet
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 8
3.1.3 Selecting an APN Profile
You can select anAPN profile for the CPE to access the Internet.
To set the APN profile, perform the following steps:
1. Choose Internet > Network Connection.
2. Select a profile from the Profile drop-down list.
3. Click Submit.
----End
3.1.4 Selecting PDP Type
You can select a PDP (Packet Data Protocol) to set the dial-up type, perform the following
steps:
1. Choose Internet > Network Connection.
2. Set PDP type to one of the following values described in the following table:
Value Description
IPv4 Internet Protocol version 4 (IPv4) that is the foundation for current Internet
technologies. Because IP resources are limited, an IP address is shared by
different persons in different time periods, that is, an IP address is not
allocated to only one network subscriber. Thus, the real-name system
cannot be implemented over the IPv4-based networks.
IPv4v6 IPv4-to-IPv6 transition technology that is used when IPv4 and IPv6 coexist.
3. Click Submit.
----End
3.1.5 Setting Data Roaming
To turn roaming on or off, perform the following steps:
1. Choose Internet > Network Connection.
2. Do as follows:
Select the Enable check box behind the Data Roaming to turn it on.
Clear the Enable check box behind the Data Roaming to turn it off.
3. Click Submit.
----End
3.2 APN Management
To create anAPN profile, perform the following steps:

Online Help
3 Internet
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 9
1. Choose Internet >APN Management.
2. Click Add.
3. Set Profile name,APN, User Name and Password.
4. Set Authentication to None, PAP, CHAP or Auto.
5. Click Submit.
----End
To modify an APN profile, perform the following steps:
1. Choose Internet >APN Management.
2. Choose the APN profile item to be modified, and click Edit.
3. Modify Profile name,APN, User Name or Password.
4. Set Authentication to None, PAP, CHAP or Auto.
5. Click Submit.
----End
To delete an APN profile, perform the following steps:
1. Choose Internet >APN Management.
2. Choose the APN profile item to be deleted, and click Delete.
3. Click OK.
----End
3.3 PIN Management
To manage the PIN, You can perform the following operations on the PIN Management
page:
Enable or disable the PIN verification
Verify the PIN
Chang the PIN
Set automatic verification of the PIN
3.3.1 Viewing the Status of the USIM Card
To view the status of the USIM card, perform the following steps:
1. Choose Internet > PIN Management.
2. View the status of the USIM card in the USIM card status field.
----End

Online Help
3 Internet
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 10
3.3.2 Enabling PIN Verification
To enable PIN verification, perform the following steps:
1. Choose Internet > PIN Management.
2. Set Pin verification to Enable.
3. Enter the PIN (4 to 8 digits) in the Enter PIN box.
4. Click Submit.
----End
3.3.3 Disabling PIN Verification
To disable PIN verification, perform the following steps:
1. Choose Internet > PIN Management.
2. Set Pin verification to Disable.
3. Enter the PIN (4 to 8 digits) in the Enter PIN box.
4. Click Submit.
----End
3.3.4 Verifying the PIN
If PIN verification is enabled but the PIN is not verified, the verification is required.
To verify the PIN, perform the following steps:
1. Choose Internet > PIN Management.
2. Enter the PIN (4 to 8 digits) in the PIN box.
3. Click Submit.
----End
3.3.5 Changing the PIN
The PIN can be changed only when PIN verification is enabled and the PIN is verified.
To change the PIN, perform the following steps:
1. Choose Internet > PIN Management.
2. Set Pin verification to Enable.
3. Set Change PIN to Enable.
4. Enter the current PIN (4 to 8 digits) in the PIN box.
5. Enter a new PIN (4 to 8 digits) in the New PIN box.
6. Repeat the new PIN in the Confirm PIN box.

Online Help
3 Internet
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 11
7. Click Submit.
----End
3.3.6 Setting Automatic Verification of the PIN
You can enable or disable automatic verification of the PIN. If automatic verification is
enabled, the CPE automatically verifies the PIN after restarting. This function can be enabled
only when PIN verification is enabled and the PIN is verified.
To enable automatic verification of the PIN, perform the following steps:
1. Choose Internet > PIN Management.
2. Set Pin verification to Enable.
3. Set Remember my PIN to Enable.
4. Click Submit.
----End
3.3.7 Verifying the PUK
If PIN verification is enabled and the PIN fails to be verified for three consecutive times, the
PIN will be locked. In this case, you need to verify the PUK and change the PIN to unlock it.
To verify the PUK, perform the following steps:
1. Choose Internet > PIN Management.
2. Enter the PUK in the PUK box.
3. Enter a new PIN in the New PIN box.
4. Repeat the new PIN in the Confirm PIN box.
5. Click Submit.
----End
3.4 Setting the Internet MTU
A maximum transmission unit (MTU) is defined as the maximum packet size (in bytes) at a
communication protocol layer. It relates to communication ports, for example, network
interface cards and serial ports.
To set the MTU, perform the following steps:
1. Choose Internet > Internet MTU.
2. Set Internet MTU to a value in the range of 1280 to 1500.
3. Click Submit.
----End

Online Help
4 LAN
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 12
4 LAN
A local area network (LAN) is a shared communication system to which multiple devices are
attached.
When correctly configured, devices on the LAN can use the CPE to share data.
4.1 Setting LAN Host Parameters
By default, the IP address is 192.168.1.1 with a subnet mask of 255.255.255.0.You can
change the host IP address to another individual IP address that is easy to remember. Make
sure that IP address is unique on your network. If you change the IP address of the CPE, you
need to access the web management page with the new IP address.
To change the IP address of the CPE, perform the following steps:
1. Choose LAN > DHCP Settings.
2. In the LAN Host Settings area, set IP address.
3. Set the DHCP server to Enable.
4. Click Submit.
----End
4.2 Configuring the DHCP Server
DHCP enables individual clients to automatically obtain TCP/IP configuration when the
server powers on.
You can configure the CPE as a DHCP server or disable it when the CPE is working in the
routing mode.
When configured as a DHCP server, the CPE automatically provides the TCP/IP configuration
for the LAN clients that support DHCP client capabilities. If DHCP server services are
disabled, you must have another DHCP server on your LAN, or each client must be manually
configured.
To configure DHCP settings, perform the following steps:
1. Choose LAN > DHCP Settings.
2. Set the DHCP server to Enable.
3. Set Start IP address.
This IP address must be different from the IP address set on the LAN Host Settings

Online Help
4 LAN
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 13
area, but they must be on the same network segment.
4. Set End IP address.
This IP address must be different from the IP address set on the LAN Host Settings
area, but they must be on the same network segment.
5. Set Lease time.
Lease time can be set to 1 to 10,080 minutes. It is recommended to retain the
default value.
6. Click Submit.
----End
4.3 Bundled Address List
You can bind an IP address to a device based on its MAC address. The device will receive the
same IP address each time it accesses the DHCP server. For example, you can bind an IP
address to an FTP server on the LAN.
After you change the settings, click Submit for the changes to take effect. The
DHCP server may need to restart.
To add an item to the setup list, perform the following steps:
1. Choose LAN > DHCP Settings.
2. Click Edit List.
3. Click Add.
4. Set the MAC address and IP Address.
5. Click Submit.
----End
To modify an item in the setup list, perform the following steps:
1. Choose LAN > DHCP Settings.
2. Click Edit List.
3. Choose the item to be modified, and click Edit.
4. Set the MAC address and IP Address.
5. Click Submit.
----End
To delete an item in the setup list, perform the following steps:
1. Choose LAN > DHCP Settings.

Online Help
4 LAN
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 14
2. Click Edit List.
3. Choose the item to be deleted, and click Delete.
4. Click OK.
----End
To delete all items from the setup list, perform the following steps:
1. Choose LAN > DHCP Settings.
2. Click Edit List.
3. Click Delete All.
4. Click OK.
----End

Online Help
5 Wi-Fi
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd 15
5 Wi-Fi
5.1 Wi-Fi Settings
This function enables you to configure the Wi-Fi parameters.
5.1.1 Setting General Parameters
To configure the general Wi-Fi settings, perform the following steps:
1. Choose Wi-Fi > Wi-Fi Settings.
2. In the General Settings area, set Wi-Fi to Enable.
3. Set Mode to one of the values described in the following table:
Parameter Value Description
802.11b/g The Wi-Fi client can connect to the CPE in 802.11b or 802.11g
mode.
802.11g The Wi-Fi client can connect to the CPE in 802.11g mode.
802.11b The Wi-Fi client can connect to the CPE in 802.11b mode.
802.11b/g/n The Wi-Fi client can connect to the CPE in 802.11b, 802.11g, or
802.11n mode. If the client connects to the CPE in 802.11n mode,
the Advanced Encryption Standard(AES) encryption mode is
required.
4. Click Submit.
----End
5.1.2 Setting SSID Profile
After you configure the CPE on the SSID Profile page, the Wi-Fi client connects to the CPE
based on preset rules, improving access security.
To configure the CPE on the SSID Profile page, perform the following steps:
1. Choose Wi-Fi > Wi-Fi Settings.
2. Set SSID.
The SSID can contain 1 to 32 ASCII characters. It cannot be empty and the last
character cannot be a blank character. In addition, the SSID cannot contain the
following special characters: / ' = " \ &
The Wi-Fi client connects to the CPE using the found SSID.