Huawei B618 User manual

B618 LTE CPE
Quick Start

Thank you for purchasing the LTE CPE. This LTE CPE brings
you a high speed wireless network connection.
This document will help you understand your LTE CPE, so
you can start using it right away. Please read this document
carefully before using your LTE CPE.
For detailed information about the functions and
configurations of the LTE CPE, refer to the Help on the web
management page that comes with the LTE CPE.
1. Getting to know your LTE CPE
Note:
• During thunderstorms and rainy weather, turn off and
disconnect the LTE CPE.
• The LTE CPE function descriptions and illustrations in this
document are for your reference only. The product you have
purchased may vary.
Application scenario
The LTE CPE can:
• Provide Internet access for Wi-Fi® devices and a computer.
• Connect to a telephone for voice services.
• Expand LAN coverage together with a hub or a switch.
Note:
When the LTE CPE is in use, you can alter its position or
orientation to improve signal reception.
Selecting the installation environment
Obstacles such as concrete and wooden walls will affect the
transmission of the network signal. It is recommended that
when you install LTE CPE you choose an open space.
Keep the LTE CPE away from equipment that generates
strong magnetic and electric fields, for instance microwaves,
refrigerators, and satellite receivers.

2. Appearance
1. External antenna sockets*
Connect to external antennas.
2. Power button
Press and hold to power the B618 on or off.
3. USB port
Connect to a USB device.
4. WAN/LAN port
• Working as a LAN port when connected to a computer,
switch, or other LAN device.
• Working as a WAN port when connected to an Ethernet
port on the wall.
••••••••••
••••••••••
••••••
••••••••
••••••••
••••••••••••••••
••••••
••
••
••
••
••
••
••
••••
••••
••
••
5. Landline phone port
Connect to a telephone.
6. Power input
Connect to compatible power adapter.
7. Signal indicators
Green: signal reception available (more indicators mean
better reception).
8. WPS button
Press and hold to active WPS connection when Wi-Fi is
turned on.
9. Indicators
Power LED indicator
• Off: Power off.
• On: Power on.
Status LED indicator
• Off: Data server connection is disconnected.
• Blinking in green: Firmware update.
• Green: Get IP address of WAN.
LAN LED indicator
• Off: No device is connected to a LAN port.
• Blinking: data is being transmitted through a LAN port.
• Green: At least one of the LAN ports is connected to a
device.

Wi-Fi LED indicator
• Off: Both 2.4G and 5G Wi-Fi is closed.
• Blinking in green: WPS open.
• Green: Both or one of the 2.4G and 5G Wi-Fi is opened.
Mode LED indicator
• Steady cyan/blue/ yellow: connected to a mobile
network.
• Steady green: connected to an Ethernet network.
• Steady red:
–The SIM card is not recognized, the PIN has not been
entered, or the PIN verification failed.
10. Micro-SIM card slot
Accommodate a micro-SIM card.
11. RESET button
Restore the LTE CPE to its factory settings.
* External antennas
The external antennas are optional accessory. To buy
external antennas, please contact network service
provider.
3. Setup
1. Installing the micro-SIM card
Install the micro-SIM card according to the illustration.
Note:
• When removing the micro-SIM card, gently press
the micro-SIM card in, then release. The card will
automatically pop out.
• Do not remove the micro-SIM card when the LTE CPE is
powered on. Doing so will affect the performance of your
LTE CPE, and data stored on the micro-SIM card may be
lost.

2. Connecting to a power adapter
Install the power adapter according to the illustration.
Note:
Use the provided power adapter. Use of an incompatible
power adapter or one from an unknown manufacturer may
cause the LTE CPE to malfunction, fail, or could even cause
a fire. Such use voids all warranties, whether expressed or
implied, on the product.
4. Connecting to your router's Wi-Fi
network
Once the router has connected to a mobile data network, you
can connect your computer or mobile phone to the router's
Wi-Fi network to access the Internet. Please refer to the
label on the bottom of the router for the default wireless
network name (SSID) and password (Wi-Fi KEY).
Note:
• When the Wi-Fi LED indicator is steady on, Wi-Fi is
enabled. To enable or disable Wi-Fi, refer to the help
section on the router's web-based management page.
• Ensure that you promptly change the Wi-Fi network
name and password on the web-based management page
to prevent unauthorized access to your Wi-Fi network.
Once you have changed the password, you will need to
reconnect to the router's Wi-Fi network.

5. Configuring your router
You can configure the router using the web-based
management page.
Logging into the Web Management Page
1. Make sure the connection between the Mobile WiFi and the
Wi-Fi device or computer is working normally.
2. Open the browser, and enter http://192.168.8.1 or http://
viva.router in the address box.
3. Enter the user name and password to log in to the web
management page.
Note:
The default user name is admin.
The default password is admin.
You will be prompted to change the default login password
for the web-based management page to prevent unauthorized
users from changing the router’s settings.
Change Wi-Fi Network name and password
1. Log in to the web management page (refer to the above
section).
2. Click on “Settings”
3. Click on “Next” 3 times.
4. Insert the desired router name in the “SSID” field.
3. Click on “Next”
5. Insert the current password, new password, & confirm
new password in related field (This key will be requested
every time a user tries to access this connection for the
first time).
6. Click “Finish” (Router will reboot applying the new
settings).
Send SMS and view incoming SMS.
1. Log in to the web management page (refer to “Logging Into
the Web Management Page” section).
2. Click on “SMS”

6. Optional configurations
Note:
The features described in this section are for reference
purposes only. Your router may not support all of these
features.
1. Connecting multiple devices
You can connect a computer, or landline phone to the router
to access the Internet, make telephone calls, and more.
2. Restoring to Factory Settings
If you forget some configuration parameters, you can restore
the LTE CPE to its factory settings and then configure the
LTE CPE again.
Use a sharply pointed object to press and hold the RESET
button until the Power indicator turns off. The LTE CPE is
then restored to its factory settings.
Note:
• After you carry out this operation, the LTE CPE's
personal configuration parameters will all be deleted.
All configurations on the web management page will be
restored to the factory settings.
3. Establishing a WPS Connection
If the Wi-Fi device to be connected to the LTE CPE supports
WPS, the wireless network encryption key is generated
automatically and there is no need to enter it manually. The
steps for WPS connection are as follows:
1. Turn on the CPE.
2. Turn on the Wi-Fi device to be connected to the LTE CPE.
3. Activate the LTE CPE's WPS.
Note:
• Press and hold the WPS button for two to five seconds
to set up a 2.4 GHz WPS connection, or press and hold the
button for more than five seconds to set up a 5 GHz WPS
connection.

4. Activate the Wi-Fi device's WPS.
Note:
For specific instructions for the Wi-Fi device, refer to the
device's user manual.
5. Downloading Huawei HiLink App
Scan the QR code to download the Huawei HiLink App and
configure the router from your phone.