Hubbardton Forge 750111 Programming manual

ASSEMBLY & INSTALLATION INSTRUCTIONS
Brindille Side and Console Tables with Wood Tops 750111 & 750113
F22
50970
1 OF 3
750111
(shown in illustrations)
750113

ASSEMBLY & INSTALLATION INSTRUCTIONS
Brindille Side and Console Tables with Wood Tops 750111 & 750113
F22
50970
A Table
B Wood Top
C Screws
D Washers
E Felt Pads
Component Parts
2 OF 3

ASSEMBLY & INSTALLATION INSTRUCTIONS
Brindille Side and Console Tables with Wood Tops 750111 & 750113
F22
50970
If you need further assistance, please contact the dealer from which you purchased this product. We hope you enjoy
your table!
* Hubbardton Forge will not be liable for injury or damage caused by improper use of this table.
3 OF 3
1. Carefully unpack table (A) and wood top (B) from the
carton.
2. Place wood top (B) on at surface with holes facing up.
Be sure surface won't scratch wood nish.
3. Align tabs on table (A) with holes in wood top (B).
4. Using screws (C) and washers (D), attach table (A) to
wood top (B).
Notes: An extra short screwdriver may be needed for
some screw locations.
5. Adhere felt pads (E) to legs of table (A) if desired for oor
surface.
Notes: It may be necessary to manipulate legs of con-
sole table for it to sit correctly.
C
(Figure 1 )
Cleaning Instructions:
Use a dry soft cloth for dusting purposes, do not
rub. Never scrub, use an abrasive, or any solvent-
based cleaning products, as this could damage
the nish. Wipe dry with soft cloth.
D
A
B
E
TAB