Hubbardton Forge 750134 Programming manual

ASSEMBLY & INSTALLATION INSTRUCTIONS
Olympus Accent Table - Wood 750134
F24
51422
1 OF 3

ASSEMBLY & INSTALLATION INSTRUCTIONS
Olympus Accent Table - Wood 750134
F24
51422
A Table
B Wood Top
C Screws (3)
D Felt Pads (4)
Component Parts
2 OF 3

ASSEMBLY & INSTALLATION INSTRUCTIONS
Olympus Accent Table - Wood 750134
F24
51422
If you need further assistance, please contact the dealer from which you purchased this product. We hope you enjoy
your table!
* Hubbardton Forge will not be liable for injury or damage caused by improper use of this table.
3 OF 3
1. Carefully unpack table (A) and wood top (B) from the
carton.
2. Place wood top (B) on at surface with holes facing up.
Be sure surface won't scratch wood nish.
3. Align tabs on table (A) with holes in wood top (B).
4. Using screws (C) , attach table (A) to wood top (B).
Notes: An extra short screwdriver may be needed for
some screw locations.
5. Adhere felt pads (D) to bottom ring of table (A) if desired
for oor surface.
Cleaning Instructions:
Use a dry soft cloth for dusting purposes, do not
rub. Never scrub, use an abrasive, or any solvent-
based cleaning products, as this could damage
the nish. Wipe dry with soft cloth.
C
(Figure 1 )
D
A
B
TAB