Hubbell Kim Lighting Lightvault LTV81 User manual

| 1 |
© 2019 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748
Phone [phone] | www.kimlighting.com | Rev. Aug. 06, 2019
Hubbell BT Remote
Quick Start Guide for iOS and
Android.
Setting Up And Enabling Wireless
Controlled Optics:
LTV8 luminaires can be controlled via
Bluetooth®-equipped mobile devices.
1. Go to the Apple Store or Gogle play to
download the Hubbell BT Remote app.
2. Power on the LTV8 luminaire.
3. Open the Hubbell BT Remote app.
4. App may request permission to enable
Bluetooth functionality, choose "Yes".
5. Go to connections tab to scan for
devices.
6. Stand near luminaire to be adjusted and
scan for devices. A list of both already-
paired, and available Bluetooth-ready
devices will appear. Select the LTV8 fixture
you wish to adjust. Lightvault luminaires
will appear with "HUBB" prefix.
7. Enter security code supplied in product
documentation.
8. The Kim logo in center of screen will
indicate "connected" when LTV8 is paired
with your mobile device. The fixture will
blink 3 times to confirm connection.
9. Use arrow keys to adjust deck-tilt up to 15°
in full 360° rotation. Tap arrow for fine
adjustments, hold down arrows for
continuous sweep.
10. Use dimmer slider bar to adjust fixture
brightness level. Tap (+/-) for fine
increments. (The fixture will dim down as
far as 20% of the full 100%). Fixtures
manufactured after 07/2019 can be
turned on/off with green power switch.
11. After fine tuning the LTV8, open
application menu. Select the fixture to
disconnect and save settings.
12. Repeat steps 6 -11 for each additional
fixture.
13. Fixture name and password can be
changed or reset. Pick a name and 6 digit
password and click ok. Save new
password and name for future
adjustments. Current device keeps new
data.
Tip 1: Bluetooth signal exits the xture
through the glass lens. The signal can-
not travel through the brass housing.
For best results, be sure your device is
in the line of sight of the LED's.
4. Turn on Bluetooth.
6. Select LTV8 in the
menu
8. Connected.
5. Go to connections tab to scan for
devices.
7. Enter PIN*.
Lightvault®LTV81/LTV82/LTV83 iOS/Android App Instructions
Tip 2: Delete the app and reinstall it If you are
unable to connect to the LTV8 or have
other software issues. Restart your
phone.
Dimming
Dimming
Aiming
On/Off
15. Password. Features
Connected
Password
Part No. 93045631-APP

| 2 |
© 2019 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748
Phone [phone] | www.kimlighting.com | Rev. Aug. 06, 2019
KIM REMOTE - Troubleshooting
Trouble pairing device and Hubbell BT REMOTE with xture.
1. When pairing initially, stand as close as possible to the xture.
2. Power down xture for 15 seconds and power back on.
3. Pair one device at a time.
4. Close app. To do this on an Android device go to Settings > Applications (or Application Manager) > Downloaded
> Hubbell BT Remote > Force Stop. To do this on an Apple device (iOS 7): Push home button twice, nd Hubbell BT
Remote app, hold the app icon and swipe up. To do this on an Apple device (iOS 6): Push home button twice, nd
Hubbell BT Remote app, tap the X to close.
5. We recommend using one type of Bluetooth device (apple or android) when pairing.
When pairing multiple types of devices with the same xture, power down the xture for 15 seconds before
switching devices.
6. A phone case/cover may interfere with the Bluetooth signal. Removing your case can signicantly
improve connectivity.
Why did my dimming settings change?
The advanced electronics inside the LTV8 are designed to retain your settings for both dimming and aiming.
Note: Each time you connect to the xture with the Hubbell BT Remote app, dimming settings are automatically reset to
100%. Please follow the following steps.
1. Power on xture.
2. Pair and Connect device.
3. Aim and set dimming.
4. Disconnect the device. (This will store your settings in memory)
5. Once settings are stored the xture does not require power to retain settings.
For warranty see http://www.hubbelllighting.com/resources/warranty
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Hubbell is under license. Other trademarks and trade names are those of their respective owners. Apple, the Apple logo,
iPad, iPhone, and iPod Touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service
mark of Apple Inc. Google Play is a trademark of Google Inc.
The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kim Lighting is under license. Other trademarks and trade names are those of their respective owners.
Apple, the Apple logo, iPad, iPhone, and iPod Touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.