HUCK Seiltechnik Eagles Nest Tree User manual

Seite 1von 40
AAssembly Instructions
Eagles Nest Tree
Art. No. 4652-40 (Height 5,74 m)
Required Safety Surfacing 400 mm
(Rubber, Wood Chip, Pea Gravel. etc.)
Operator: _____________________________________________________
Location:______________________________________________________

Seite 2von 40
Revision history
Revision 0 –2014-02-07
The first allowed version
Assembly Instructions
Revision 5 –2019-01-21
Zwei Ketten hinzu für Leiter FH
All rights reserved
© Copyright 2014 Huck Seiltechnik GmbH

Seite 3von 40
Contents
AAssembly Instructions Eagles Nest Tree Art. No. 4652-40 (Height 5,74 m) Required
Safety Surfacing 400 mm (Rubber, Wood Chip, Pea Gravel. etc.).............................................1
1Introduction Assembling ...............................................................................................................4
2Data sheet Eagles Nest Tree, Art. 4652-40..................................................................................6
3Delivery contents (parts list with part numbers).........................................................................8
4Installation.................................................................................................................................... 13
5Post installation checks.............................................................................................................. 27
BMaintenance Instructions Eagles Nest Tree ........................................................... 29
Art.4652-40 ........................................................................................................................................... 29
6Introduction Maintenance........................................................................................................... 31
7General maintenance information.............................................................................................. 32
8Maintenance timetable ................................................................................................................ 34
9Regular maintenance................................................................................................................... 35
10 Monthly maintenance.................................................................................................................. 36
11 Quarterly maintenance................................................................................................................ 36
12 Half yearly maintenance.............................................................................................................. 36
13 Annual maintenance.................................................................................................................... 37
14 Maintenance printout................................................................................................................... 38
15 Hand over document................................................................................................................... 40
List of Tables
Table 3-1: Delivery contents, in words .....................................................................................................8
Table 3-2: Delivery contents, in symbols..................................................................................................9

Seite 4von 40
1 Introduction Assembling
1.1 General information
This equipment should be installed, inspected, maintained and operated in
accordance with EN1176-7 guidelines.
Before installation work commences, please check that you have all of
the equipment and fixation components in the parts list provided (see
Tables 3-1 and 3-2).
Please consider that the installation has to be carried out only on even
terrain (max.slope up to 3%).
Any spare parts that may be required can be obtained directly from your
supplier.
Please do not hesitate to call your supplier if you have any problems during
installation or in case of any other questions.
Following installation, complete assembly instructions, maintenance
instructions and a maintenance record must be sent to the operator who
must confirm receipt in writing. See the last page of this document.
All nuts and bolts are hot-dip galvanised or stainless steel.
One of the characteristics of stainless steel is that uncontrolled cold
welding may occur when the nuts are tightened. To prevent this, it is
necessary to spray the nuts and bolts with Teflon spray or another similar
lubricant.
We hereby confirm that this play equipment has been tested and
certified in accordance with the play equipment standard EN 1176.

Seite 5von 40
Drawings / Views
All optical drawings are showing only the measurements/dimensions and
are no mandatory technical views of the complete item.
We reserve the right to change technical details of our articles which are
serving for the further development of our articles and are reasonable for
the customer.
Measurement tolerances
Because of the properties and characteristics of the components, minor
measurement tolerances compared to the indication on the sketches are
possible.
This concerns all shown measurements except the foundation
measurements resp. measurements below upper edge ground level/play
area.

Seite 6von 40
2 Data sheet Eagles Nest Tree, Art. 4652-40
1. Foundation radius Ø 4,30 m
2. Required space Ø 8,20 m
3. Fall height 2,95m
4. Total ground height 5,74 m
The Images (individual drawings) are not to scale !!
5. Required safety surface:
Surface material
Description
mm
Minimum
thickness of
layer
mm
Maximum
height of fall
mm
Topsoil grass
<= 1000*
Chipped bark
20 –80 grain size
300/400
<= 2000/3000
Wood chippings
5 –30 grain size
300/400
<= 2000/3000
Sand
0.2 –2 grain size
300/400
<= 2000/3000
Gravel
2 –8 grain size
300/400
<= 2000/3000
Other ground
materials
As recommended by
manufacturer
6. Name and overall dimension of the largest component:
1x Steel post-length 6,20m, ø 193.7 mm
7. Name and weight of the heaviest component:
1x Steel post-approx. 157 kg
8. Intended age group: 6 years and over
9. Please note that this equipment is set in concrete.
Concrete: C25/30
Required concrete: ~2.5 m3
Foundations/area to be excavated(All foundations must be brought to equal
level!):
9 x 0,40 m long x 0,40 m wide, total depth 0,90 m including 10 cm drainage
1 x 1.60 m long x 1,20 m wide, total depth 1.30 m including 10 cm drainage
Round off foundation edges (min.R = 100 mm)! Sizes of fundations are “4-5”
(natural ground).
Soil class 4: soft to medium plasticity, interleave bound, with minor portion of
stone (portion < 30% with bigger diameter of 63 mm grain size).

Seite 7von 40
Soil class 5 : ground with soil class 3 and 4 with big portion of stones
(portion > 30% with bigger diameter of 63 mm grain size).
In case of sandy and soft soils, the surface measure of foundations have to be
enlarged for about 50%!
10. Assembly time, once foundations completed: 7 hours.
Required assistants: 3 persons.
11. Any spare parts which may be required can be obtained directly from
your supplier.
12. We hereby confirm that this item of play equipment has been tested and
certified in accordance with the play equipment standard EN 1176.

Seite 8von 40
3 Delivery contents (parts list with part numbers)
3.1 In words
Table 3-1: Delivery contents, in words
Pos.
Quantity
Element /
Description
Size
O.K.
Missing
1
1
Steel post
Ø193.7 mm x 6,20 m
2
1
Net component
3
1
Steel mast/Wood post/Net
connection part
4
8
Wood posts
Ø140mm x 1659mm
5
4 sets
Support ropes (preconnected
on Pos.3)
6
1
Flag incl. connection parts
101
12
Bowed shackles
Ø 8mm
102
12
Foundation chains
Ø 7mm x 700mm
103
8
Nyloc nuts, Washers,Nut caps
M12
104
8
Stainless steel bearing
adapter
M12
105
8
Post caps
Ø140mm
106
24
Post cap screws
3,5 x 25mm
107
8
Bolt M10 with connection
parts
M10 x 175mm
108
2
Loctite(Thread adhesive)
109
8
Hexagon socket screw with
flat point
M12 x 25 mm
110
1
Arch clamp with screws
5 x 25mm
112
1
Anker plate with Ring nut and
bolt
500mm x
500mm/M16/M16 x
25mm
113
2 sets
2-piece clamp protection rings
1
sewer pipe
from the customer!
Ø 250 mm,
0,85 m long

Seite 9von 40
3.2 In symbols
Table 3-2: Delivery contents, in symbols
Pos.
Quantity
Symbol
1
1
2
1
3
1
4
8

Seite 10 von 40
Pos.
Quantity
Symbol
5
1
6
1
101
12
102
12
103
8
104
8
105
8
106
24
107
8
108
2
109
8

Seite 11 von 40
Pos.
Quantity
Symbol
110
1
112
1
113
2 sets
1
sewer pipr Ø 250 mm, 0,85 m long
from the customer

Seite 12 von 40
Loctite-Thread locking adhesive!
Glue all screws, nuts and sleeves with Loctite.
(not less than 5 drops !)
(except for Nylock nuts)

Seite 13 von 40
4 Installation

Seite 14 von 40
Foundation sizes

Seite 15 von 40
Foundation plan

Seite 16 von 40

Seite 17 von 40
Foundation depths
Play component alignment
7 7
6
5
3
2
8

Seite 18 von 40
Installation

Seite 19 von 40

Seite 20 von 40