HUCK Seiltechnik Spider User manual

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
1
AAssembly Instructions
Spider Art. No. 5000-6-6
Operator: _________________________________________________________
Location: _________________________________________________________

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Huck-SG_Mont-Anl\Huck-Mont\Englisch\5000-6-6\Spider_5000_6_6_ST_B_L_1_GBR.doc
2
Revision history
Revision 0 –2013-10-24
The first allowed version FH
Assembly instruction
Revision 8 2020-05-28
Datenblatt u. Zeihnungen geändert (PS) FH
All rights reserved
© Copyright 2013 Huck Seiltechnik GmbH

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
3
Please note the explanations and abbreviations and notes.
For any queries please contact the manufacturer
Contents
AAssembly Instructions Spider Art. No. 5000-6-6......................................................... 1
1Introduction Assembling.............................................................................................. 4
2Datasheet Spider, Art. No. 5000-6-6............................................................................ 5
3Delivery contents (parts list with part numbers) ........................................................ 7
4Required Spaces - Top view....................................................................................... 11
5Post installation checks ............................................................................................. 26
BMaintenance Instructions Spider Art. No. 5000-6-6 ................................................. 27
6Introduction Maintenance........................................................................................... 29
7General maintenance information ............................................................................. 30
8Maintenance timetable................................................................................................ 32
9Regular maintenance.................................................................................................. 33
10 Monthly maintenance ................................................................................................. 34
11 Quarterly maintenance ............................................................................................... 34
12 Half yearly maintenance ............................................................................................. 35
13 Annual maintenance................................................................................................... 35
14 Maintenance printout.................................................................................................. 37
15 Hand over document .................................................................................................. 39
List of Tables
Tabelle 3-1: Delivery contents, in words ............................................................................ 7
Tabelle 3-2: Delivery contents, in symbols ........................................................................ 8

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Huck-SG_Mont-Anl\Huck-Mont\Englisch\5000-6-6\Spider_5000_6_6_ST_B_L_1_GBR.doc
4
1 Introduction Assembling
1.1 General information
This equipment should be installed, inspected, maintained and operated in ac-
cordance with EN1176-7 guidelines.
Before installation work commences, please check that you have all of
the equipment and fixation components in the parts list provided (see
Tables 3-1 and 3-2).
Please consider that the installation has to be carried out only on even
terrain (max.slope up to 3%).
Any spare parts that may be required can be obtained directly from your
supplier or from Fa. Huck Seiltechnik GmbH
Adress: Huck Seiltechnik GmbH
Dillerberg 3
D-35614 Aßlar/Berghausen
Tel. [phone]
Fax [phone]
Please do not hesitate to call your supplier if you have any problems during in-
stallation or with any other questions. You can reach us at the following Tel.
[phone]
Following installation, complete assembly instructions, maintenance in-
structions and a maintenance record must be sent to the operator who
must confirm receipt in writing. See the last page of this document.
All nuts and bolts are hot-dip galvanised or stainless steel.
One of the characteristics of stainless steel is that uncontrolled cold
welding may occur when the nuts are tightened. To prevent this, it is
necessary to spray the nuts and bolts with Teflon spray or another simi-
lar lubricant.
We hereby confirm that this play equipment has been tested
and certified in accordance with the play equipment standard EN 1176-1.

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
5
2 Datasheet Spider, Art. No. 5000-6-6
1. Component zone:11.30 m x 9.80 m
Impact area:11,56 m x 11,70 m
Installation zone:15,90 m x 14,65 m (greater than impact area)
Total ground height: 6.22 m
Free height of fall: 1.60
The Images (individual drawings) are not to scale !!
2. Required safety surface:
Surface material
Description
mm
Minimum thickness
of layer mm
Maximum height
of fall mm
Topsoil grass
<= 1000
Chipped bark
20 –80 grain size
300
400
<= 2000
<= 3000
Wood chippings
5 –30 grain size
300
400
<= 2000
<= 3000
Sand
0,2 –2 grain size
300
400
<= 2000
<= 3000
Gravel
2 –8 grain size
300
400
<= 2000
<= 3000
Other ground
materials
As recommended
by manufacturer
Critical fall height
as checked
Name and overall dimension of the largest component:
Steel post, length 7.22 m, Ø 193.7 mm (210 kg)
Name and weight of the heaviest component:
Steel post, 181 kg
Intended age group: 6 years and over
Please note that this equipment is set in concrete.
Concrete: C25/30
Required concrete: 12,7 m3
(All foundations must be brought to equal level!)
Foundations
6 x 1.70 m long x 1.70 m wide, total depth 0.70 m
1 x 1.20 m long x 1.20 m wide, total depth 0.60 m
area to be excavated:
6 x 1.70 m long x 1.70 m wide, total depth 1.20 m
1 x 1.20 m long x 1.20 m wide, total depth 1.10 m including 10 cm drainage
Foundation edges must be rounded off (min.R = 100 mm)!
Sizes of fundations are designed for soils class“4-5” (natural ground).
Soil class 3:
Non-cohesive to low-cohesive plasticity, sand, gravel and sand-gravel-
mixtures, with very low portion of stones portion of stones (portion > 30%
with bigger dia-meter of 63 mm grain size)
Soil class 4:
soft to medium plasticity, interleave bound, with minor portion of stone (por-
tion < 30% with bigger diameter of 63 mm grain size)
Soil class 5:
Soil class 5: ground with soil class 3 and 4 with big portion of stones
(portion > 30% with bigger diameter of 63 mm grain size)
IN CASE OF SANDY AND SOFT SOILS, THE SURFACE DIMENSIONS OF FOUNDATIONS HAVE
TO BE ENLARGED FOR ABOUT 50%!.
Assembly time, once foundations complete: 3 hours.
Required assistance: 3 persons.
Required tools: wheel excavator a lifting height of approx. 7.50 m height ladder approx. 3 m long,
spirit level, various wrenches and screwdriver.
Any spare parts which may be required can be obtained directly from your supplier or from
Fa.Huck Seiltechnik GmbH
Adress: Huck Seiltechnik GmbH
Dillerberg 3
D-35614 Aßlar/Berghausen
Tel. [phone]
Fax [phone]
We hereby confirm that this item of play equipment has been tested
and certified in accordance with the play equipment standard EN 1176-1.

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Huck-SG_Mont-Anl\Huck-Mont\Englisch\5000-6-6\Spider_5000_6_6_ST_B_L_1_GBR.doc
6
Drawings / Views
All optical drawings are showing only the measurements/dimensions and are no
mandatory technical views of the complete item.
We reserve the right to change technical details of our articles which are serving for
the further development of our articles and are reasonable for the customer.
Measurement tolerances
Because of the properties and characteristics of the components, minor measure-
ment tolerances compared to the indication on the sketches are possible.
This concerns all shown measurements except the foundation measurements resp.
measurements below upper edge ground level/play area.

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
7
3 Delivery contents (parts list with part numbers)
3.1. In words
Table 3-1: Delivery contents, in words
Pos.
Quantity
Element /
Description
Size
O.K.
Missing
1
1
upper steel mast
Ø 193.7 mm x 7.22 m
2
1
Spider Net component
3
2
membrane
(preassembled on Pos.2)
4
1
Mast cap
Ø 360 mm
6
1
Net Plate-Post Connecter (pre-
assembled on Pos.2)
Ø 360 mm
7
1
Threaded bolt, Nut, Nylock nut,
Washer
M 16 x 165 mm
8
6
Turnbuckles
M 20 Stainless
9
6
Anker chains
Ø 13 mm x 1.60 m
10
12
Shackles
M12
11
6
Foundation ankers
Galvanized
12
1
Steel Base Plate
500 mm x 500 mm
13
1
Lifting Rope
.
14
1
Assembley Ring (must be re-
moved after Installation is com-
plete)
M16
15
1
Loctite
6
toothed washer DIN 6797
(pressambled an Pos. 6)
Ø 17 mm
17
96
Foundation Steel
(provided by Customer)
1.60 m lang, Ø 12 mm
19
48
Foundation Steel
(provided by Customer)
0.65 m lang, Ø 12 mm
20
1
Middle Foundation Pipe
Ø 300 mm x 650 mm

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Huck-SG_Mont-Anl\Huck-Mont\Englisch\5000-6-6\Spider_5000_6_6_ST_B_L_1_GBR.doc
8
3.2. In symbols
Table 3-2: Delivery contents, in symbols
Pos.
Quantity
Symbol
1
1
upper steel mast Ø 193.7 x 6.3 mm
(7.22 m long)
2
1
Spider Net component
3
2
membrane
(preassembled on Pos.2)
4
1
Mast cap Ø 360 mm
6
1
Net Plate-Post Connecter
(preassembled on Pos.2)
7
1
Threaded bolt, Nut, Nylock nut, Washer
8
6
Turnbuckles M20 Stainless
9
6

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
9
Table 3-2: Delivery contents, in symbols
Pos.
Quantity
Symbol
13er Anker chains
1.60 m lenght
10
12
Shackles
M12 galvanized
11
6
Foundation ankers
Ø 20 mm galvanized, approx..750 m lengt
12
1
Steel Base Plate
500 mm x 500 mm
13
1
Lifting Rope
14
1
Assembley Ring
(must be removed after Installation is complete)
15
1
Loctite 3 ml
17
96
Foundation Steel
(provided by Customer)
1.60 m x Ø 12 mm
19
48
Foundation Steel
(provided by Customer)
0.65 m x Ø 12 mm

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Huck-SG_Mont-Anl\Huck-Mont\Englisch\5000-6-6\Spider_5000_6_6_ST_B_L_1_GBR.doc
10
Table 3-2: Delivery contents, in symbols
Pos.
Quantity
Symbol
20
1
Middle Foundation Pipe
(provided by Customer)
ca. Ø 300 mm, 650 mm lang

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
11
4 Required Spaces - Top view
Minimum space required by law

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Huck-SG_Mont-Anl\Huck-Mont\Englisch\5000-6-6\Spider_5000_6_6_ST_B_L_1_GBR.doc
12
Recommended minimum space

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
13
Screw locking device!
glue all screws, nuts and sleeves with loctite.
(not less than 5 drops !)
(except for lock nut)

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Huck-SG_Mont-Anl\Huck-Mont\Englisch\5000-6-6\Spider_5000_6_6_ST_B_L_1_GBR.doc
14
Foundation plan - Side view

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
15
Foundation plan - Top view

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Huck-SG_Mont-Anl\Huck-Mont\Englisch\5000-6-6\Spider_5000_6_6_ST_B_L_1_GBR.doc
16

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
17
Installing

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Huck-SG_Mont-Anl\Huck-Mont\Englisch\5000-6-6\Spider_5000_6_6_ST_B_L_1_GBR.doc
18
Installing Pos.2 –Raise net

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
19
Net –Alignment

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Huck-SG_Mont-Anl\Huck-Mont\Englisch\5000-6-6\Spider_5000_6_6_ST_B_L_1_GBR.doc
20
Net –Tensioning
(Apply tension with 2 persons opposite from each other)