HULALA HOME HCFKBS0257 User manual

NOTE:
This brochure contains IMPORTANT safty info. Please read
and keep for future reference.
HULALA
H O M E
ITEM NO. HCFKBS0257-SILVER

s
h
2
01

3
02
03

4
04
3
3
6
24
18
1

5
05 Installation of the hanging brackert(suspension part)
06

07
6

7
08

09

10
9
E12*3
3
1pcs
24pcs
3.
18pcs

10
11
12 Remote control wiring diagram

Download the Art House APP
Register and log in
Turn the device on in network mode
Method: Power o ffthe equipment for more than
ten seconds, then power on the equipment
Intelligent fan indicator configuration description
1Add device networking configuration
remote control <ONLY>
Press both keyboards at the same time for 5s “
“
“
“
Bind device to app
Enter "Home" "Add Device" "Automatic Discovery" to bind the device to app.
2How to connect to Alexa?
(1)Complete product networking configuration in the App
Complete the device's networking configuration according to the prompts in the App.
Note: In the App, change the name of the device to an easily identifiable name such
as Alexa; names are usually in English, such as "bed light".
(2)Configure the Amazon Echo device
(If you have already configured Amazon Echo, you can skip this step.
The following instructions are based on the iOS client.)
Make sure you Amazon Echo device is powered on and connected to a Wi-Fi network.
Open the Alexa App on your phone. After successful login, tap on the menue in the
upper left corner of the Home page, select "Settings" and tap "Set Up A New Device"
to set up the Amazon Echo.
Choose your Amazon Echo device type and language
for connecting. Press and hold the small dot on the
device until the light turns yellow. Then tap "Continue"
to connect to the hotspot.
After connecting to the Amazon Echo
hotspot, return to the page. At this point,
the connection is successful. Tap
"Continue" to proceed to the next step.
Choose a Wi-Fi network to connect to.
Amazon Echo will take a few minutes to
try to connect to the network.
11

After the network connection is successful, tap "Continue".
An introduction video will appear. After the video ends, tap
"Continue" to jump to the Alexa Home page. You have now
completed the Amazon Echo's configuration process.
(3)Key step —— Link Skill
（Then search for "App Name"
Tap "Enable" to enable the Skill.）
（Tap on "Skills" in the Alexa
App menu）
（Enter the App account and password, then tap
"Link Now" to link your App account to enable the
Skill. Now you can start your smart home journey.）
(4)Common commands
Control the device via voice commands, now you can control your smart device with Echo.
You can control your device (such as your bedroom light) with the following commands:
Alexa,turn on DEVICENAME
Alexa,turn off DEVICENAME
Alexa, turn on light on the DEVICENAME.
Alexa，is light on on DEVICENAME?
Alexa, set the fan speed to 7.
Alexa, turn up the fan speed.
Alexa, what is the fan speed?
12

13
13

14
15
Thefanisnoisy.
PleasefollowNO.14fanbalance(page10)
14

WARRANTY
Are you having difficulty
with assembly? Missing parts?
Please send email with your order No
customerser[email protected]
For return, Please check the return policy with
the retailer or MarketPlace you bought from.
Appreciated your purchasing from us.
Pop up your life by our furniture piece!