Human Hearing Products 001-8025 User manual

The Original Nordic
Human Handling Concept
MC 001-8025
MC 001-8080
MC 001-8030
45942
36384
45943
UDI-DI/GTIN
5744001971499
5744001971697
5744001971505
ISO 09 07 06 07
001-8025 001-8080 001-8030
(UK) User Manual
38_20230412_UK
Top Class Positioning Cushions
Regulation MDR 2017/745 for medical devices class 1
Article no. Name - Size
HMI no.
Master Comfort Cylinder Cushions
Master Comfort Cylinder Cushion – S
Master Comfort Cylinder Cushion – M
Master Comfort Cylinder Cushion – L

Thank you for choosing a product from master care A/S.
We recommend reading the user manual thoroughly before using the
product (-s).
The information in this user manual applies to the shown products
provided that the products have not been modied or customized
and that the products have been used as recommended in this user
manual.
If the costumer changes, repairs or uses the product in other combi-
nations than recommended by master care A/S the CE-approval no
longer applies and the guarantee becomes void.
In case of doubt, contact master care A/S or our distributor in your
area.
MDR (EU) 2017/745:
Products in this user manual is CE-approved and follows the harmo-
nized standards. This means that the products are in compliance with
the essential health and safety directives. The product(-s) comply with
the standards in the Medical Device Regulation MDR (EU) 2017/745 –
Class 1.
The intended use of the product/-s:
The product is used to support and reduce pressure on the tissue while
repositioning a user or when lying in bed. Wedges with anti-slide on
the underside can be used directly on slippery surfaces.
Correct use of the product:
The Master Comfort products can be placed between the user and the
area of support and thereby reduce the pressure on the skin. Alterna-
tively, the products can be used to support the sitting position or when
lying on the side to prevent falling forward or backwards.
Warning:
The use of pillows and wedges can’t replace the need of frequent
repositioning and daily skin assessment.
Risk assessment:
Always make a risk assessment and a functional assessment of the
user prior to using the product. This way using the product for trans-
ferring or moving a user, is ergonomic and legally sound.
Knowledge of the product/transferring:
It is important that the user of the product has been properly instruct-
ed in the use of the product and has read the user manual thoroughly
prior to using the product.
master care A/S provide education in the use of products and on our
website all user manuals can be found.
Life span:
The expected life span of the products is 1-5 years depending on the
use, user´s load and how often it is washed and dried.
Products which no longer provide sufcient support, with defect
seams, broken material or other deciencies must be discarded. This
way you will always keep a sound and healthy work environment for
both helper and user.
Make visual inspections frequently and preferably before every use.
Guarantee:
master care A/S provide a 2-year guarantee covering material defects
and manufacturing defects if the product has been used correctly.
Unintended events and injuries when misusing the products:
Unintended events must always be reported to the appropriate Na-
tional Authority and to master care A/S or the distributor in the current
country.
master care A/S and our distributors take no responsibility for per-
sonal injuries or product damages if the product(-s) have been used
in contravention of the by the manufacturer recommended intended
purpose or proper use of the product.

User Manual - Cylinder Cushions
Page 1
Table of Contents
Between the legs or under the heels:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2
Supporting the body:........................................................................... page 2
”The Wandering Cushion”:...................................................................... page 2
As a pillow: .................................................................................. page 3
Under the arm sitting in a wheelchair with a table: .................................................. page 3
Technical Specikations ........................................................................ page 4

User Manual - Cylinder Cushions
Page 2
”The Wandering Cushion”:
Supporting the body:
8. To follow the directions of the concept the
Cushion needs to be moved regularly.
6. Adjust the Krøyer Balls to support and comfort
the user.
5. Place the chosen Cylinder /-s Cushions where
extra support or perceptual support is nedded.
7. The smallest Cylinder Cushion can be used as
a ”Wandering Cushion”.
3. Place the Cylinder Cushion M / L under the
hollow of the knee to avoid hyperextending the
knee.
4. If the user is bedridden and is challenged with
anxiety, motor- or sensory challenges the
Cylinder Cushions can help normalize the issues.
2. Place the Cylinder Cushion - S / M just above
the heel/-s to ease the pressure on the heels.
Shape the Cylinder Cushion for optimal support
and comfort.
1. Place the chosen Cylinder Cushion between
the user´s legs and arrange the Krøyer Balls
comfortably.
Between the legs or under the heels:

User Manual - Cylinder Cushions
Page 3
Under the arm sitting in a wheelchair with a table:
As a pillow:
12. Place the user in the wheelchair with the
table in front. Place the Cylinder Cushion under
the arm on top of the table to give a comfortable
and stabile support.
10. The Cylinder Cushion – L can be chosen if the
user also needs support under the shoulders.
9. Place the chosen Cylinder Cushion under the
pillow under the head. Make sure the head is
comfortable and in alignment. A Cushion on each
side can be more comfortable.
11. 2 pcs. of Cylinder Cushions can be used, if
the user needs support of/under the shoulders
e.g. for COPD patients.

We support the Sustainable Development Goals
User Manual - Cylinder Cushions
Washing:
This product can be washed in a washing
machine at max 85 ºC but disinfection with
alchohol is preferable to extend durability.
Ironing:
Do not iron.
Detergents pH level:
This product tolerates detergents / disinfec-
tants with a pH level between 5-9.
Dry cleaning:
Do not dry clean.
Fabric softener:
Never use fabric softener as this will reduce
the sliding properties signicantly.
Bleach:
Do not bleach.
Dry Tumbling:
This product can be tumble dried gently and
at max. 40 ºC but airdrying is preferable to
extend the durability.
Maintenance:
Make frequent visual inspections to check
that the incontinence surface and all seams
are intact before use.
Surface cleaning:
The surface of this product can be cleaned
with a wet cloth and soap.
User Manual:
Always read the User Manual thoroughly
before using the product.
Disinfectants:
This product tolerates alcoholic disinfectants
with a pH level between 5-9.
Disposal:
Always make sure to follow local guidelines
when disposing or discarding the product.
For more information, videos
Quick Guide etc., visit
www.master-care.dk
Reservations are made for printing errors.
WARNINGS
DS/EN ISO 12952-2:2010
Textiles – Assessment of the ignitability of bed-
ding items – Part 2: Ignition source: match-ame
equivalent.
DS/EN ISO 12952-1:2010
Textiles – Assessment of the ignitability of bed-
ding items – Part 1: Ignition source: smouldering
cigarette.
ISO certications:
MC 001-8025 Master Comfort Cylinder Cushion – S L 30 x D 15 cm
MC 001-8080 Master Comfort Cylinder Cushion – M L 50 x D 15 cm
MC 001-8030 Master Comfort Cylinder Cushion – L L 100 x D 15 cm
Size:Article no. - Product Name
Materials:
Cover: Flame retardant, elastic, and waterproof polyester.
Contents: Original, ame retardant Krøyer balls (expandable polystyrene).
Technical Specikations
Find us on:
Never leave the user on
the product when lying on the
edge of the bed.
Never leave the product
on the oor.
The use of pillows and wedges
can’t replace the need of frequent
repositioning and daily skin
assessment.
Make sure that all relevant brakes
are activated before transferring
the user.
CE-certication:
This product is CE-approved and
follows the harmonized standards.
This means that the products are
in compliance with the essential
health and safety directives.
The product(-s) comply with the
standards in the Medical Device
Regulation (EU) 2017/745 – class 1.
master care A/S, Soenlystvej 3, DK 8340 Malling, Danmark
Tel. [phone], E-mail: [e-mail]