Humandata USB-013 User manual

HuMANDATA LTD.
USB to RS232 Converter
USB-013 (Rev3)
User’s Manual
Ver. 1.1

USB
-
01
3 (Ver.1.1)
Table of Contents
Table of Contents Table of Contents
Table of Contents
Precautions ......................................................................................................... 1
Precautions ......................................................................................................... 1Precautions ......................................................................................................... 1
Precautions ......................................................................................................... 1
Revision History ................................................................................................. 2
Revision History ................................................................................................. 2Revision History ................................................................................................. 2
Revision History ................................................................................................. 2
Introduction ........................................................................................................ 2
Introduction ........................................................................................................ 2Introduction ........................................................................................................ 2
Introduction ........................................................................................................ 2
1. Overvie ................................................................................................................ 3
1. Overvie ................................................................................................................ 31. Overvie ................................................................................................................ 3
1. Overvie ................................................................................................................ 3
2. Po er Supply ......................................................................................................... 3
2. Po er Supply ......................................................................................................... 32. Po er Supply ......................................................................................................... 3
2. Po er Supply ......................................................................................................... 3
3. Specifications ......................................................................................................... 4
3. Specifications ......................................................................................................... 43. Specifications ......................................................................................................... 4
3. Specifications ......................................................................................................... 4
3.1. Optional Accessories ............................................................................................ 6
4. RS232C Pin Assignment ........................................................................................ 7
4. RS232C Pin Assignment ........................................................................................ 74. RS232C Pin Assignment ........................................................................................ 7
4. RS232C Pin Assignment ........................................................................................ 7
5. Additional Documentation and User Support ....................................................... 7
5. Additional Documentation and User Support ....................................................... 75. Additional Documentation and User Support ....................................................... 7
5. Additional Documentation and User Support ....................................................... 7
6. Warranty and Compensation................................................................................. 7
6. Warranty and Compensation................................................................................. 76. Warranty and Compensation................................................................................. 7
6. Warranty and Compensation................................................................................. 7
7. Outline Dra ing .................................................................................................... 8
7. Outline Dra ing .................................................................................................... 87. Outline Dra ing .................................................................................................... 8
7. Outline Dra ing .................................................................................................... 8

USB
-
013 (Ver.1.
1
)
Precautions
Precautions Precautions
Precautions
1
This product uses ordinary off
is therefore inappropriate for use in applications that require
special quality or
or prevent accidents, such as safety mechanisms in fields including
space, aeronautics, medicine, and nuclear po er.
2
Do not be used under ater or in high
3
Do not be
or other flammable gases.
4
Do not turn on po er hen circuit board surface is in contact ith
other metal.
5
Do not apply voltage higher than rated voltage.
6
This
improvements.
7
All efforts have been made to produce the best manual possible, but
if users notice an error or other problem, e ask that they notify us.
8
Item 7 not ithstanding, HuMANDATA
consequences arising from use of this product.
9
HuMANDATA cannot be held liable for consequences arising from
using this product in a ay different from the uses described herein,
or from uses not sho n herein.
10
This
may not be copied, reproduced, or distributed ithout permission.
11
If the product emits smoke, catches fire, or becomes unusually hot,
cut the po er immediately.
12
Do not install the control cables or communication cables together
ith the main circuit lines or po er cables.
it
may
13
Be careful of static electricity.
Do Not
Attention
1
This product uses ordinary off
-the-
shelf electronic components, and
is therefore inappropriate for use in applications that require
special quality or
reliability and are expected to protect human lives
or prevent accidents, such as safety mechanisms in fields including
space, aeronautics, medicine, and nuclear po er.
Do not be used under ater or in high
-
humidity environments.
Do not be
used in the presence of corrosive gases, combustible gases,
or other flammable gases.
Do not turn on po er hen circuit board surface is in contact ith
other metal.
Do not apply voltage higher than rated voltage.
This
manual may be revised in the future ithout notice o ing to
improvements.
All efforts have been made to produce the best manual possible, but
if users notice an error or other problem, e ask that they notify us.
Item 7 not ithstanding, HuMANDATA
cannot be held liable for the
consequences arising from use of this product.
HuMANDATA cannot be held liable for consequences arising from
using this product in a ay different from the uses described herein,
or from uses not sho n herein.
This
manual, circuit diagrams, sample circuits, and other content
may not be copied, reproduced, or distributed ithout permission.
If the product emits smoke, catches fire, or becomes unusually hot,
cut the po er immediately.
Do not install the control cables or communication cables together
ith the main circuit lines or po er cables.
In
such
may
result in malfunction due to noise.
Be careful of static electricity.
shelf electronic components, and
is therefore inappropriate for use in applications that require
reliability and are expected to protect human lives
or prevent accidents, such as safety mechanisms in fields including
humidity environments.
used in the presence of corrosive gases, combustible gases,
Do not turn on po er hen circuit board surface is in contact ith
manual may be revised in the future ithout notice o ing to
All efforts have been made to produce the best manual possible, but
if users notice an error or other problem, e ask that they notify us.
cannot be held liable for the
HuMANDATA cannot be held liable for consequences arising from
using this product in a ay different from the uses described herein,
manual, circuit diagrams, sample circuits, and other content
may not be copied, reproduced, or distributed ithout permission.
If the product emits smoke, catches fire, or becomes unusually hot,
Do not install the control cables or communication cables together
such
an environment,

2
USB
-
013 (Ver.1.
1
)
Revision History
Revision History Revision History
Revision History
Date
Date Date
Date Revision
Revision Revision
Revision Description
Description Description
Description
Dec. 11, 2014 v1.0 Initial release
Apr. 1, 2016 v1.1 Revise: Section "Specifications"
Introduction
Introduction Introduction
Introduction
Thank you very much for purchasing our product of USB-013.
USB-013 is a USB to RS-232C converter that isolated bet een RS-232C and a USB
port. So it’s safe for use in factory automation environment.

3
USB
-
013 (Ver.1.
1
)
1.
1.1.
1. Overview
Overview Overview
Overview
Front Side (USB)
Front Side (USB) Front Side (USB)
Front Side (USB)
Rear Side (RS-232)
Rear Side (RS-232) Rear Side (RS-232)
Rear Side (RS-232)
2.
2.2.
2. Power Supply
Power Supply Power Supply
Power Supply
USB-013 is po ered through a USB port (Bus-po ered). No external po er supply
is required.
USB Connector
Transmit
Monitor LED
RS
-
232C
Male Connector
#4
-
40 UNC
Po er LED
Recei
ve
Monitor LED

4
USB
-
013 (Ver.1.
1
)
3.
3.3.
3. Specifications
Specifications Specifications
Specifications
Item
Item Item
Item Description
Description Description
Description Remarks
Remarks Remarks
Remarks
Model
Model Model
Model USB-013
Po er
Po er Po er
Po er
5VDC
Supplied through a USB
port(Bus-po ered)
No external po er supply
required
Current Consumption
Current Consumption Current Consumption
Current Consumption Less than 100 mA
I/O Interface
I/O Interface I/O Interface
I/O Interface RS-232C ESD protection ±15KV
HOST interface
HOST interface HOST interface
HOST interface USB 2.0 Compliant
(Support High Speed)
USB 1.1 compatible
ESD protection
Baud Rate
Baud Rate Baud Rate
Baud Rate 300 bps to 1 Mbps Support custom baud rate
Data Bits
Data Bits Data Bits
Data Bits 7 or 8 bit
Stop Bits
Stop Bits Stop Bits
Stop Bits 1 or 2 bit
Parity
Parity Parity
Parity Even, Odd, No-parity
FIFO RX Buffer Size
FIFO RX Buffer Size FIFO RX Buffer Size
FIFO RX Buffer Size 1024 bytes
FIFO TX Buffer Size
FIFO TX Buffer Size FIFO TX Buffer Size
FIFO TX Buffer Size 1024 bytes
Isolation Method
Isolation Method Isolation Method
Isolation Method Bus isolation
Isolation Protection
Isolation Protection Isolation Protection
Isolation Protection 2500VDC Designed value
Processor
Processor Processor
Processor FT232H FTDI
USB Driver
USB Driver USB Driver
USB Driver Virtual COM port driver
Supports OS
Supports OS Supports OS
Supports OS Windo s
10/8.1/8/7/Vista/XP
LED
LED LED
LED
POW: USB bus po er
RX: Receive data
TX: Transmit data
USB connector
USB connector USB connector
USB connector Standard Type B Female
RS232C Connector
RS232C Connector RS232C Connector
RS232C Connector D-Sub 9pin Male
Operating Ambient
Operating Ambient Operating Ambient
Operating Ambient
Temperature
Temperature Temperature
Temperature -20 to 60
℃ No condensation permitted
Operating Ambient Humidity
Operating Ambient HumidityOperating Ambient Humidity
Operating Ambient Humidity 30 to 85%RH

5
USB
-
013 (Ver.1.
1
)
Storage Ambient
Storage Ambient Storage Ambient
Storage Ambient
Temperature
Temperature Temperature
Temperature -20 to +55 °C No condensation permitted
Storage Ambient Humidity
Storage Ambient Humidity Storage Ambient Humidity
Storage Ambient Humidity 30 to 85%RH
Compliance to Standards
Compliance to Standards Compliance to Standards
Compliance to Standards CE
Weight
Weight Weight
Weight Approx. 90 [g] Only main body
Dimensions
Dimensions Dimensions
Dimensions 67 x 67 x 28 [mm]
(2.638" x 2.638" x 1.102") Without projections
* There is a case to be changed to the parts of the compatibility
* There is a case to be changed to the parts of the compatibility * There is a case to be changed to the parts of the compatibility
* There is a case to be changed to the parts of the compatibility
* Po er saving function (suspend, standby, sleep and others) is not supported
* Po er saving function (suspend, standby, sleep and others) is not supported * Po er saving function (suspend, standby, sleep and others) is not supported
* Po er saving function (suspend, standby, sleep and others) is not supported
[CE marking]
USB-013 has applied the common standard for heavy industrial environment
EN61000-6-2 and EN61000-6-4.
--- Application of the standards ---
EMS: EN61000-6-2
· IEC61000-4-2 Electrostatic discharge requirements
· IEC61000-4-3 Radiated electromagnetic field requirements
· IEC61000-4-4 Electrical fast transient burst requirements
· IEC61000-4-5 Surge immunity test requirements
· IEC61000-4-6 Conducted radio frequency requirements
EMI: EN61000-6-4
· CISPR11 Group 1 Class A Emissions

6
USB
-
013 (Ver.1.
1
)
3.1.
3.1.3.1.
3.1. Optional ccessories
Optional ccessories Optional ccessories
Optional ccessories
Model Name
Model Name Model Name
Model Name Image
Image Image
Image Description
Description Description
Description
PEN-003
PEN-003 PEN-003
PEN-003
USB series Attachment ith clamping scre
JAN ： 4937920800709
PEN-003-DIN
PEN-003-DIN PEN-003-DIN
PEN-003-DIN
USB series Attachment for 35mm DIN rail
JAN ： 4937920800716
PEN-003-MG
PEN-003-MG PEN-003-MG
PEN-003-MG
USB series Attachment ith neodymium magnet
JAN ： 4937920801201

7
USB
-
013 (Ver.1.
1
)
4.
4.4.
4. RS232C Pin ssignment
RS232C Pin ssignment RS232C Pin ssignment
RS232C Pin ssignment
D-Sub 9pin Male
D-Sub 9pin MaleD-Sub 9pin Male
D-Sub 9pin Male
5.
5.5.
5. dditional Documentation and User Support
dditional Documentation and User Support dditional Documentation and User Support
dditional Documentation and User Support
The follo ing documents and other supports are available at
http:// .hdl.co.jp/en/faspc/USB/usb-013
http:// .hdl.co.jp/en/faspc/USB/usb-013http:// .hdl.co.jp/en/faspc/USB/usb-013
http:// .hdl.co.jp/en/faspc/USB/usb-013
Device Driver
Dimensional dra ing
… and more.
6.
6.6.
6. Warranty and Compensation
Warranty and Compensation Warranty and Compensation
Warranty and Compensation
Please refer to the follo ing URL for the arranty.
http:// .fa.hdl.co.jp/en/fa- arranty.html
http:// .fa.hdl.co.jp/en/fa- arranty.htmlhttp:// .fa.hdl.co.jp/en/fa- arranty.html
http:// .fa.hdl.co.jp/en/fa- arranty.html
Pin No
Pin NoPin No
Pin No Name
NameName
Name Direction
DirectionDirection
Direction Remarks
Remarks Remarks
Remarks
1
1 1
1 DCD In Data carrier
detect
2
2 2
2 RXD In Receive data
3
3 3
3 TXD Out Transmit data
4
4 4
4 DTR Out Data terminal
ready
5
5 5
5 GND - Signal ground
6
6 6
6 DSR In Data set ready
7
7 7
7 RTS Out Request to send
8
8 8
8 CTS In Clear to send
9
9 9
9 RING In Ring indicator
CASE
CASE CASE
CASE FG - Connect to GND

8
USB
-
013 (Ver.1.
1
)
7.
7.7.
7. Outline Drawing
Outline Drawing Outline Drawing
Outline Drawing
* The dra ing above is designed values. Please note that some errors may be observed.

USB to RS-232C Converter
USB to RS-232C Converter USB to RS-232C Converter
USB to RS-232C Converter
USB-013 Rev3
User’s Manual
Ver. 1.1 ............................................... Apr. 1, 2016
Ver. 1.1 ............................................... Apr. 1, 2016 Ver. 1.1 ............................................... Apr. 1, 2016
Ver. 1.1 ............................................... Apr. 1, 2016
HuMANDATA LTD.
HuMANDATA LTD.HuMANDATA LTD.
HuMANDATA LTD.
Address: 1-2-10-2F, Nakahozumi, Ibaraki
Osaka, Japan
ZIP 567-0034
Tel: [phone] (Japanese)
Fax: [phone] (Japanese/English)
URL: http://www.fa.hdl.co.jp (Japan)
http://www.fa.hdl.co.jp/en (Global)