Humandata USB Series User manual

[USB series]
1ch.
USB-003 USB-003-RJ45 USB-006
USB-010 USB-013 USB-017
USB-021 USB-025 USB-026
USB-040 USB-047 USB-301
USB-305 USB-503 USB-504
2ch.
USB-009 USB-018 USB-019
USB-020 USB-046 USB-302
USB-304
4ch.
USB-033 USB-033SI USB-039
8ch.
USB-401 USB-402
[LNX series]
LNX-001
HuMANDATA LTD.
USB Driver Installation Guide
Ver. 1.5

USB Driver Installation Guide
Ver.1.5
Table of Contents
Precautions ......................................................................................................... 1
Revision History ................................................................................................. 1
Introduction ........................................................................................................ 2
1. Installation procedure............................................................................................ 3
2. Uninstallation procedure....................................................................................... 5
3. Downloads.............................................................................................................. 7
4. Warranty and compensation.................................................................................. 7

1
USB Driver Installation Guide
Ver.1.5
Precautions
1
This manual may be revised in the future without notice owing to
improvements.
2
All efforts have been made to produce the best manual possible, but
if users notice an error or other problem, we ask that they notify us.
3
Item 2 notwithstanding, HuMANDATA cannot be held liable for the
consequences arising from use of this product.
4
HuMANDATA cannot be held liable for consequences arising from
using this product in a way different from the uses described herein,
or from uses not shown herein.
5
This manual may not be copied, reproduced, or distributed without
permission.
Revision History
Date Revision Description
Apr. 4, 2016 v1.0 Initial release
Aug.26, 2016 v1.1 Add a new product
Sep.24, 2017 v1.2 Add a new product
Mar.16, 2018 v1.3 Add a new product
Mar.29, 2019 v1.4 Add a new product
Jan.7, 2020 v1.5 Add a new product
Attention

2 USB Driver Installation Guide
Ver.1.5
Introduction
Thank you very much for purchasing our product.
This manual describes the installation procedure for the FTDI USB driver.
Refer to relevant instructions for your operating system
(Windows 10/8.1/8/7/Vista/XP).
There are two types of USB drivers that are used in our products FTDI and CDC
class driver. This manual describes the FTDI USB driver. Please be careful so as
not to mistake by referring to following.
FTDI
USB-003 USB-003-RJ45 USB-006
USB-009 USB-010 USB-013
USB-017 USB-018 USB-019
USB-020 USB-021 USB-025
USB-026 USB-033 USB-033SI
USB-039 USB-040 USB-046
USB-047 USB-301 USB-302
USB-304 USB-305 USB-401
USB-402 USB-503 USB-504
LNX-001
Please refer to the manual of "CDC Class Driver Installation Guide" for
installation of the following USB products.
CDC class
USB-034 USB-036 USB-037
USB-045A USB-045V USB-201
USB-205 USB-206 USB-207
USB-403 USB-501 USB-502
LNX-202

3
USB Driver Installation Guide
Ver.1.5
1. Installation procedure
This section describes the installation procedure.
1.
Insert the driver CD into the CD drive and open the folder
CD_Drive:¥Driver¥USBDRV-CDM***.
Latest USB driver is available for download. Please refer to the section 3
Downloads for the URL.
2.
Click on the setup.exe file icon.
3.
In Windows 10/8.1/8/7/Vista, a User Account Control dialog box opens.
Click on the "Yes" button.
4.
Window appears on the screen for decompressing the compressed driver file.
Click on the "Next" button.
5.
USB Driver Installer Ver.* window appears.
Do not connect the product to your PC when you are installing the driver.
After checking the "Confirm disconnection", and click on the "OK" button.
6.
The installation wizard starts. Click on the "Next" button.
7.
In Windows 10/8.1/8/7/Vista, Windows Security dialog box appears twice
during the installation. Click on the "Yes" button.
8.
When the installation is complete, the installation completed dialog box
appears. Click on the "Finish" button.

4 USB Driver Installation Guide
Ver.1.5
9.
-1) Windows 10/8.1/8/7/Vista
Connect the product to your PC, an icon appears in the notification area, and
the driver is installed automatically.
When the driver has been successfully installed and the USB-003 is connected
to your PC, “USB-003 HuMANDATA LTD.” appears in Device Manager.
-2) Windows XP
Connect the product to your PC, the Found New Hardware Wizard starts.
Select
No, not this time , and click on the "Next" button.
Select
Install the software automatically , and click on the "Next" button.
When the installation is complete, the message “Completing the Found New
Hardware Wizard” appears. Click on the "Finish" button.
In Windows XP, you need to run several times the above steps. Number of
times may vary depending on each product.
When the driver has been successfully installed and the USB-003 is connected
to your PC, “USB-003 HuMANDATA LTD.” appears in Device Manager.

5
USB Driver Installation Guide
Ver.1.5
2. Uninstallation procedure
HFTClean.exe is a tool to uninstall the USB driver. It is possible to easily uninstall the
USB driver of the product built-in the FTDI chip with the HuMANDATA Vender ID.
This program will be operated with the following OS.
Windows10(32/64bit)
Windows8/8.1(32/64bit)
Windows7(32/64bit)
WindowsVista(32/64bit)
WindowsXP(32/64bit)
This uninstaller uninstall the driver as an argument of the vendor ID of
HuMANDATA product by using the CDM Uninstaller 1.4 provided by the FTDI.
1.
Insert the driver CD into the CD drive and open the folder
CD_Drive:¥ Application¥ HFTClean.
Latest HFTClean.exe is available for download. Please refer to the section 3
Downloads for the URL.
2.
Click on the HFTClean_v**.exe file icon.
3.
In Windows 10/8.1/8/7/Vista, a User Account Control dialog box opens.
Click on the "Yes" button.
4.
Window appears on the screen for decompressing the compressed driver file.
Click on the "Next" button.

6 USB Driver Installation Guide
Ver.1.5
5.
Exe file are extracted to a temporary folder. Application will be automatically run.
6.
Select the model that you want to uninstall. It is also possible to specify all of
the model.
7.
Do not connect your PC to the product when you are uninstalling the driver.
After checking of "Confirm disconnection", and click on the "Uninstall" button.
*After HFTClean.exe is terminated, uncompressed files are automatically deleted.

7
USB Driver Installation Guide
Ver.1.5
3. Downloads
Latest USB driver is available for download from the link following.
https://www.hdl.co.jp/en/faspc/Drivers/index.html
Latest HFTClean.exe for uninstallation of the USB driver is available for download
from the link following.
https://www.fa.hdl.co.jp/en/info-support.html
4. Warranty and compensation
Please refer to the following URL for the warranty.
https://www.fa.hdl.co.jp/en/fa-warranty.html

USB Driver Installation Guide
Ver. 1.5 ............................................... Jan. 7, 2020
HuMANDATA LTD.
Address: 1-2-10-2F, Nakahozumi, Ibaraki
Osaka, Japan
ZIP 567-0034
Tel: [phone] (Japanese)
Fax: [phone] (Japanese/English)
URL:
https://www.fa.hdl.co.jp (Japan)
https://www.fa.hdl.co.jp/en (Global)