HumbleCrew CA8630 User manual

MAR20EM
www.humblecrew.com(844) 509-4888
Model: CA8630
Collection: Seine
Made in Malaysia
Product info
Cleaning
Wipe with a damp cloth and mild soap
Dry with soft, lint free cloth
cabinet

Read instruction carefully . See Furniture Parts list and Hardware List for guidance . Be sure you have all parts before you start assembling .
Place and assemble furniture on a clean flat soft surface , such as carpet or rug to pervent being scratched .
Before you begin, please follow assembly instructions carefully, then follow them step by step.
Reminder:
Please ensure that all surfaces and edges with colours/laminations are facing forward/outward.
1
2
PART LIST
TOP PANEL MINI FIX
4
SIDE PANEL (L)
6
SIDE PANEL (R)
7
8
QTY
3
5
BACK PANEL
HARDWARE
A
B
C
D
E
F
G
6 SETS
ALLEN KEY M4 1 PC
BOTTOM PANEL
DRAWER FRONT
CENTER PANEL
H
I
K
M6 X 5OMM
CSK CAP WOOD SCREW
A1 A2 A3
M8 X 30MM WOOD DOWEL 12 PCS
9
10
11
CABINET LEG
DRAWER BOTTOM
14" DRAWER SLIDE M1 ( L/R )
M2 ( L/R )
MODEL : DAWN-BAR CABINETASSEMBLY INSTRUCTIONS PAGE: /7
1
6 PCS
4 PCS
1 PC
1 PC
1 PC
1 PC
1 PC
4 PCS
M3.5 X 16MM C.B SCREW
M4 X 38MM C.B SCREW 8 PCS
4 PCS
56 PCS
DRAWER SIDE
DRAWER BACK
2 PCS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
SCREWDRIVER HAMMER
SELF-PREPARED TOOLS: Tools below are NOT included in package.
8 SETS
12
14
13
2 PCS
SHELF PANEL 2 PCS
1 PC
1 PC
DOOR PANEL (L)
DOOR PANEL (R)
1 PC
1 PC
1 PC L
M
M4 X 30MM C.B SCREW
8 PCS
4 PCS
METAL SHELF SUPPORT
STUD 192 WITH SCREW I1 I2
1 SET
6
7
12
16
16
15 1 PC
1 PC
CENTER LEG
CENTER LEG PANEL
SUPPORT LEG IRON LF-3039
15 K
14
SOFT CLOSING 7/8 HINGES
J
TIPPING PACK WITHOUT AI
J1
J2
J3
J4 J5 2 SETS
CA8630
PAGE:
1
www.humblecrew.com(844) 509-4888
If a part is missing or damaged, call our toll-free customer service number (844-509-4888) for help. We can ship you a replacement part free of charge.
Before you begin assembly place item on a clean, flat surface such as a carpet or rug to prevent scratches.
Before you begin, please make sure all parts are included. Read instructions carefully.
Tools Needed: Tools below are NOT included
SCREWDRIVER HAMMER
Reminder:
Please ensure that all surfaces and edges with colors/laminations are facing forward/outward.
PAGE: 1

STEP 1 STEP 2
MODEL : CA8630 ASSEMBLY INSTRUCTIONS
PAGE: 2
1
3
4
- Insert hardware A2 onto panel (1) .
(Repeat 6 times.)
SCREWDRIVER
REQUIRED
- Insert hardware A1onto panel (3) and (4) .
(Repeat 4 times.)
- Insert hardware B onto panel (3) and (4) .
(Repeat 8 times.)
A2
x6
ROTATE
x8
PRESS
B
PRESS
A1
x4
www.humblecrew.com(844) 509-4888

STEP 3 STEP 4
MODEL : CA8630ASSEMBLY INSTRUCTIONS
PAGE: 3
5
5
M1(L)
- Insert hardware A1onto panel (5) .
(Repeat 2 times.)
- Insert hardware B onto panel (5) .
(Repeat 4 times.)
SCREWDRIVER
REQUIRED
* Ensure the arrows on hardware A1 point towards mounting positions.
x4
PRESS
B
PRESS
A1
x2
- Fix hardware M1 (L) into panel (5) with hardware E.
(Repeat 3 times for each hardware.)
Second hole from
the edge.
Second hole from
the edge.
Big hole at the center.
x1
ROTATE
x1
x1
ROTATE
ROTATE
E
E
E
www.humblecrew.com(844) 509-4888

STEP 5 STEP 6
MODEL : CA8630ASSEMBLY INSTRUCTIONS
PAGE: 4
4
1
3
4
5
M1(R)
to panel (1).
.
- Attach panel (3), (4) and (5)
- Insert all hardware A2 into A1
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 6 times.)
OR
HARDWARE
D
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and Bare pre-inserted.
- Fix hardware M1 (R) into panel (4) with hardware E.
(Repeat 3 times for each hardware.)
SCREWDRIVER
REQUIRED
x1
x1
ROTATE
ROTATE
Second hole from
the edge.
Second hole from
the edge.
EE
x1
ROTATE
Big hole at the center.
E
ROTATE
Section View
x6
A1
A2
x6 PRESS
A3
www.humblecrew.com(844) 509-4888

STEP 8
MODEL : CA8630ASSEMBLY INSTRUCTIONS
PAGE: 5
STEP 7
- Insert panel (6) along the slot.
(Repeat 2 times.)
1
3
4
5
6
6
- Connect panel (2) to panel (3), (4) and (5)
by using hardware C and D.
(Repeat 6 times.)
* In this step hardware Bare pre-inserted.
HARDWARE
D
2
3
4
5
6
6
ROTATE
x6
C
D
www.humblecrew.com(844) 509-4888

STEP 9 STEP 10
MODEL : CA8630ASSEMBLY INSTRUCTIONS
PAGE: 6
4
6
2
4
6
6
6
2
SCREWDRIVER
REQUIRED
- Fix hardware Kinto panel (2) by using hardware E.
(Repeat 5 times for each hardware.)
- Connect panel (16) to panel (2)
by using hardware F.
(Repeat 4 times.)
- Assemble part 14 into hardware K.
(Repeat 4 times.)
- Assemble part 15 into panel (16).
(Repeat 1 times.)
ROTATE
x20
E
F
16
x4
ROTATE
14
K
x4
ROTATE
x1
15
16 ROTATE
Please note
that part 15
has a Plastic adjuster
at the bottom to
unscrew and adjust the height
of part 15 if necessary.
15
K
www.humblecrew.com(844) 509-4888

PAGE: 7
STEP 11 STEP 12
MODEL : CA8630ASSEMBLY INSTRUCTIONS
1
2
3
4
5
6
1
2
3
4
5
6
6
6
- Insert hardware I1 into slot at panel (1), (2), (3) and (4) .
- Assemble hardware I1by using hardware I2.
(Repeat 8 times.)
SCREWDRIVER
REQUIRED
x8
I2
I1
ROTATE x8
PRESS
- Insert hardware Hinto mounting positions on panel (3), (4) and
(5) by hand.
(Repeat 8 times.)
H
www.humblecrew.com(844) 509-4888

STEP 13 STEP 14
MODEL : CA8630ASSEMBLY INSTRUCTIONS
PAGE: 8
8
9
- Assemble panel (7) into between panel (3), (4) and (5).
(Repeat 2 times.)
*In this step hardware Hare pre-inserted.
*Hardware Hcan fix to another up and down hole
on panel (3), (4) and (5) for adjust panel (7) to high or lower.
1
2
3
4
5
6
7
6
7
- Fix hardware Lonto panel (8) and (9) by using hardware E.
(Repeat 2 times for each hardware.)
SCREWDRIVER
REQUIRED
x8
ROTATE
LE
www.humblecrew.com(844) 509-4888

STEP 15 STEP 16
MODEL : CA8630ASSEMBLY INSTRUCTIONS
PAGE: 9
10
11
12
- Fix hardware Lonto panel (3) and (4) by using hardware E .
(Repeat 4 times for each hardware.)
- Tighten or loosen the screw to adjust
position of panel (8) and (9).
(Do only when needed.) SCREWDRIVER
REQUIRED
* In this step hardware Lhave been assembled in panel (8) and (9).
x4
G
ROTATE
- Assemble panel (12) with panel (10) and (11)
by using hardware G.
(Repeat 4 times.)
SCREWDRIVER
REQUIRED
ROTATE
x8
E
L
STEP 2
ADJUST
LSTEP 4
ROTATE
x8
E
L
STEP 1
ADJUST
LSTEP 3
1
2
3
4
5
7
8
9
7
www.humblecrew.com(844) 509-4888