hune 6000RL-M User manual

6000 SERIES KEYPAD LOCK USER MANUAL
OPERATION INDEX
1. Keypad function
a. “0~9”: ID code, password, setting parameters
b. “#”: confirm and next step
c. “*”: delete current input

2. Operation diagram
3. Simple operation
Add user:
【#】+〖master code〗+〖master password〗+【#】+〖new user code〗+〖new user
password〗+【#】

Modify password：
【#】+〖user code〗+〖password〗+【#】+〖user code〗+〖new user password〗
+【#】
Remarks: two times user code must be same.
Unlock the door：
〖user code〗+〖password〗+【#】
4. Initialization
a. Press【#】+【0】+【3】+【#】
b. Hear beep, press deadbolt button last for 3seconds.
c. After one beep, release deadbolt button.
d. Yellow light flash, after delete lock information successfully will have one
long beep.
e. After initialization, delete all information. System have default master, ID
code is“0”, and initial password “11111111”
OPERATION INSTRUCTION
1. Add user（0X10）
【#】+〖master code〗+〖master password〗+【#】+〖“10”〗+【#】+〖new user
code〗+〖new user password〗+【#】+〖user level〗+【#】
Remarks:
a. “user level”is optional, if use default can pass it then press
“#”.
b. Default user level, “ 03-ordinary user ”， 02—general user
03—ordinary user 04—temporary user 05—user defined
2. Delete user（0X20）
【#】+〖master code〗+〖master password〗+【#】+〖“20”〗+【#】+〖user
code be deleted〗+【#】
3. Modify password（0X30）
【#】+〖user code be modify password〗+〖old password〗+【#】+〖“30”〗
+【#】+〖new password〗+【#】+〖new password again〗+【#】
a. Two times new password must be same.
b. When first press new password can press“#” double times then modify
the password directly.
4. Modify user level（0X31）
【#】+〖master code〗+〖master password〗+【#】+〖“31”〗+【#】+〖user
code be modified〗+【#】+〖user level〗+【#】

5. Modify user authority （0X32）
【#】+〖master code〗+〖master password〗+【#】+〖“32”〗+【#】+〖user
code be modified〗+【#】+〖user authority〗+【#】
6. Modify unlock times（0X33）
【#】+〖master code〗+〖master password〗+【#】+〖“33”〗+【#】+〖user
code be modified〗+【#】+〖unlock times〗+【#】
7. Modify valid time（0X35）
【#】+ 〖master code〗+〖master password〗+【#】+〖“35”〗+【#】+ 〖user
code〗+【#】+〖valid time〗+【#】
Tips:
a. Valid time: YY-MM-DD, must 6digital total.
b. Must block “untimed” first then can modify valid time.
Access mode
1. Unlocked by password
〖user code〗+〖user password（maximum 8 digital）〗+【#】
(Make sure the LED light stop, without any operation.)
2. Unlocked by scrambled password
〖user code 号〗+〖scrambled password1〗+〖user password〗+〖scrambled
password2〗+【#】
(The scramble password 1 + user password total maximum is 20digital.)
3. Always unlocked/open
Unlocked by password or scrambled password, when unlocked press【0】
last for 3seconds.
4. Release always unlocked
Unlock the lock by password / scrambled password successfully again, 5seconds later
will release automatically.
5. Lock constrainedly
【#】+【0】+【1】+【#】
(Lock the door without password. Can release always unlocked and lock
the door when first time install it.)
6. Deadbolt
Press the deadbolt button on back side panel, red light flash means the lock be
deadbolt.

7. Release deadbolt
3 ways: A) press deadbolt button again
B) press down the handle on back side panel
C) 【#】+【0】+【0】+【#】
8. Unlocked deadbolt door
1 ： press user code have authority for unlocked deadbolt-the
password-【#】
2：release deadbolt then unlocked the door normally.
CLOCK OPERATION
1. Register clock（0X61）
【#】+〖user code〗+〖user password〗+【#】+〖“61”〗+【#】+〖clock data〗
+【#】
a. User must have authority to register clock.
b. Clock data: YY-MM-DD HH-MM-SS
c. Can date + clock total 12digital, also can just date total 6digital.
d. If just date, the clock default as 00: 00: 00 that day.
e. If register time, must 12digital.
f. When register date and time must valid, if not, register clock will fail.
2. Clock comparison（0X62）
【#】+〖user code〗+〖user password〗+【#】+〖“62”〗+【#】+〖clock comparison
data〗+【#】
a. User must have authority to operate the clock.
b. Clock comparison data: YY-MM-DD HH-MM-SS，maximum 12digital.
c. The clock comparison data, if not 12digital enough the system cut
out the valid data for comparison.
SYSTEM INDEX
1. Expand user（0X90）
【#】+【#】+〖user code〗+〖user password〗+【#】+〖“90”〗+【#】+〖“03”〗
+【#】
(User must have authority for this operation.)
2. Release expand user（0X90）
【#】+【#】+〖user code〗+〖user password〗+【#】+〖“90”〗+【#】+〖“58”〗

+【#】
(User must have authority for this operation.)
3. Open scrambled password function（0X91）
【#】+【#】+〖user code〗+〖user password〗+【#】+〖“91”〗+【#】+〖“03”〗
+【#】
(User must have authority for this operation.)
4. Close scrambled password function（0X91）
【#】+【#】+〖user code〗+〖user password〗+【#】+〖“91”〗+【#】+〖“58”〗
+【#】
(User must have authority for this operation.)
5. Maximum explore times（0X92）
【#】+【#】+〖user code〗+〖user password〗+【#】+〖“92”〗+【#】+〖maximum
explore times（2digital）〗+【#】
a. User must have authority for this operation.
b. Explore times: 01—99 times
6. System locked time（0X93）
【#】+【#】〖user code〗+〖user password〗+【#】+〖“93”〗+【#】+〖locked
time（2digital）〗+【#】
a. User must have authority for this operation.
b. Locked time: 01-99 minutes.