HuntCam HC-900Pro User manual

4G Trail Camera
HC-900Pro
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –17
Čeština
18 –33
Slovenčina
34 –48
Magyar
Deutsch
49 –63
64 –78

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention to
the safety instructions. If you have any questions or comments about the device, please
contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4
SPECIFICATIONS
Photo recording
Photo resolution
36MP/24MP / 20MP / 16MP / 12MP
File format
JPG
Time lapse mode
0min / 10min / 30min / 60min
Multi-shot mode
Up to 9 photos per detection
Stamp (photos and video)
Date, time, temperature (°C /°F )and
moon phase Camera/Video/Camera
Capture mode
Camera/Video/Camera+Video/Time
lapse
VIDEO recording
Video resolution
4K / 2K/ 1080P / 720P / VGA(480P)
File format
MP4 / H.264
Video length
5s /10s / 30s / 60s / 90s
Capture mode
Camera/Video/Camera+V
ideo/Timelapse
Memory storage
Support
Internal memory: none
External memory: Micro SD card
(up to 256GB, Not included)
Viewing
Built-in screen
TFT 2.0”
Power Source
Alkaline Battery
1.5V AA Battery*8
Lithium Battery
lithium AA battery DC 12V 1A
External Power Jack
DC 12V/1A(3.5x1.3mm)
Detection system
Motion Sensor
1x PIR
Detection Angle
120°
Detection Range
Adjustable from 1 to 98 Ft
Trigger Speed
0.2second
Delay between each detection
1/5/10/30 seconds, 1/5/10/30 minutes
Night time illumination system
Infra LEDs
44pcs LEDs
Flash Range
< 98 Ft
Exposure
Auto / 100/ 200/400

5
Optical field of view
120°
Dimensions
150mm" x 100mm" x 60mm"
Recommendations
Operating temperature
(-4°F to + 158°F) (-20°C to + 70°C)
Waterproof level
IP 66
THE BASICS
High power invisible LED
LED Indicator
Lens
Photo
Sensor
Central PIR
Sensor
Latch

6
Mode Switch
Battery Compartment
button
Color Display Screen
USB Port
Micro SD
Card slot

7
INSTALLATION
STEP 1
Open the battery cover and insert 8
batteries(AA) following to the positive and
the negative battery sign.
Close the battery cover to
Resist water and dust
WARNING
Be Sure to put AA batteries in the correct
direction. Inserting batteries incorrectly
will cause permanent damage.

8
Step 2
Insert Micro SD(Not included) memory card to Trail Camera
Step 3
Insert the sim card into the card slot After sim card is inserted Turn on and check the left
side of the Screen

9
Step 4
Slide the mode switch form OFF to TEST to activate the camera and view the user
setup screen.
And then slide the mode switch form TEST to ON.
The camera will start working after 10 seconds countdown, meanwhile the red
indicator light will blink.
See if the signal grid is green, Green means receiving sign. White means signal reception
failed Need to check if the sim card is locked

10
Step 5
Scan the QR codes below or search for SUNTEKCAM " on the Apple Appstore or search for
“SUNTEKCAM" on the Google Play to download the app.
IOS
Android
APP BINDING
1.How to check your ID and bind APP
1).Open your own machine menu interface and select Network Click Device ID and the
personal id of the machine will appear