9
Other brand SIM:
If “SIM Auto Match failed…” pop-up on the screen. Go to the Menu,
“Cam”, “4G Setup”, select “Manual” and fill in your SIM operator
APN details. The camera will connect to the network for transmitting
photos.
SETUP→MENU→Cam→4G Setup→Manual→APN, Username,
Password
Note! It is not a must to enter Username and Password of APN, but
some operators require this password access to get connection on their
4G network. Check with your SIM card operator to get this confirmed.
6. Function Test
Follow the steps in the quick guide to setup an account and top-up your
SIM card, otherwise the photos will only be stored on the SD card.
To test the camera operation:
1. Slide the Power Switch to SETUP and wait for the camera to con-
nect to the operator (4G signal strength indicator is shown on the
screen).
2. Press the OK button once. The camera will take a photo, save on the
SD card, and transmit the photo to your APP.
3. Follow the sequence of events on the screen. Transmitting the photo
may take 35 to 45 second based on the operator’s network and
signal strength.
Note!
– If camera configuration is correct the screen will show message “send
successful”.
– If failed to transmit follow the steps in quick guide.
– Two bars of signal strength are required for the camera to operate well.
– Do not forget to top-up your SIM card with data.
