HuperLab 4416SL+ User manual

huperVision 1.51 Hybrid DVR Quick Start Guide
- 1 -
Copyright
© 2008 Huper Laboratories CO., LTD. (Huperlab) All rights reserved.
The trademarks mentioned in the manual are legally registered to their
respective companies.
Notice
The written content provided with this product is the property of Huperlab.
No part of this manual may be reproduced, copied, translated, or transmitted in
any form or by any means without Huperlab's prior written permission.
Specifications and features are subject to change without prior notice.
Product Manual Classification
In order to assist in the use of this product, Huperlab has categorized the user
manual in the following:
For detailed product information and specifications, please carefully read
the "Product User Manual".
For detailed information related to Huperlab's unique features, please go
to "Technology Guide" section on Huperlab's website to read or download
the information you need.
For more product details, please click onto Huperlab's website at
www.huperlab.com

huperVision 1.51 Hybrid DVR Quick Start Guide
- 2 -
huperVision 1.51 Hybrid DVR
Quick Start Guide
Table of Contents
Table of Contents.............................................................................................2
Package Contents............................................................................................3
System Requirements......................................................................................4
Installation........................................................................................................5
Simple Steps to Start Recording ......................................................................9
Simple Steps to Playback Recordings ...........................................................13
How to connect IP Cameras / Video Servers.................................................16
How to use Motion Detection.........................................................................20
How to use Missing & Left Object Detection..................................................23
How to use Secure Zone Detection ...............................................................26
How to use Flow Counting feature.................................................................30
How to use Virtual Fence Detection...............................................................33
How to Ignore Smaller / Larger Object Size in detection................................35
How to do Masks in Detection Features ........................................................36

huperVision 1.51 Hybrid DVR Quick Start Guide
- 3 -
Package Contents
Video Ports Connector Audio Ports
Connector
Product Model Product CD&
Quick Guide
Watchdog
Cable 16
Port 8 Port 6 Port 4 Port 8 Port 6 Port 4 Port
4404SL+ zz
4408Q-PCIe zzz
z
4416SL+
(Flex-Channel) zzz
z
4416SL+-PCIe
(Flex-Channel) zzz
z
4604Q-PCIe zz
z z
4606Q-PCIe zz
z z
4408Q-Hybrid zz
z z
4416Q-Hybrid zzz
z
4404IP zz
4408IP zz
4416IP zz
4432IP zz
The items listed above are subject to change without notice.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 4 -
System Requirements
The System requirements depend on the total performance of display and recording
frame rates. Please refer to the configuration chart below.
Resolution CH Display
FPS
Recording
FPS
VGA Min. CPU Min. RAM
720x480 4 120 120
320x240 16 480 480 On-Board VGA E2180 1GB
640x480 16 480 64 On-Board VGA E2180 1GB
640x480 16 480 120 nVidia GeForce 6200 E4500 1GB
640x480 16 480 240 nVidia GeForce 6600 E4500 2GB
640x480 16 480 320 nVidia GeForce 6600 E6850 2GB
nVidia GeForce 6200 E4500 1GB
720x240 16 480 480 On-Board VGA E4500 1GB
nVidia GeForce 6200 E2180 1GB
720x480 16 480 64 On-Board VGA E4500 1GB
720x480 16 480 120 nVidia GeForce 6200 E4500 2GB
720x480 16 480 240 nVidia GeForce 6600 E6850 2GB
720x480 16 480 480 nVidia EN 8500 Q6600 2GB
IP License Card System Requirement
4CH / 8CH IP License nVidia GeForce 6600 E6850 2GB
16CH IP License nVidia GeForce 6600 E6850 2GB
Note.
1. The System requirement is measured based on HM-Mpeg-4 Like Fast
compression. If you use higher quality, more intelligent detection or H.264,
please increase the CPU specification.
2. For 16CH D1 480FPS recording system, we strongly suggest you can choose
Intel Core 2 Quad CPU.
3. The stability of the DVR system may be affected by the type or brand of
motherboard and chipsets used.
4. The VGA card we chose for suggestion is only for reference. Although most of
the VGA card with 256MB on-board memory will fit the need for most situations.
5. The information provided is subject to change without notice.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 5 -
Installation
1. Insert CDROM You will see the Auto Run start up like following Picture
2. Press [Install huperVision] Button
Now start huperVision installation program, The first dialogue box pop-out
and please select your installation languages and press [OK] button
Please wait until the following dialogue appears. Please press [Next]
button to proceed.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 6 -
3. Now you see the License agreement, Please take a look if you want, or
directly select [I accept the terms in the license agreement] then press
[Next] button to proceed.
4. The destination folder selection appears. Please directly press [Next]
button to use the default folder.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 7 -
5. Selection of Capture Card Driver.
Please select HMCap2R/HMCap3R to fit all series of huperVision capture
cards.
If you want to setup a 32CH machine, please select 32ch Version which will
use dual VGA output.
Meanwhile, select correct Video standard (NTSC/PAL) and press [Next] to
proceed. (This option can be adjusted after setup)
6. Now Press the [Install] button to start full installation with capture card
driver setup.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 8 -
7. When you see the Finish window, press [Finish] button, and probably you
need a reboot to initial the huperVision site server program.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 9 -
Simple Steps to Start Recording
Please follow the steps below to start recording.
1. After reboot (Manually), huperVision site server program is launching.
You will see a pop-up warning message; this is a notification that you have
not specified a recording path to record.
2. You can press the [Hammer] Button to display the general page of
preference.
3. Press the [Add…] button to add a new folder to store your recording data
files.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 10 -
4. Press [Browser…] button in the Add Storage dialogue box.
5. You can create a new folder in drive E; e.g. E:\DATA (D:\DATA indicates
there is a DATA folder under Drive D.)
So, you select the Drive E icon and press the button [Make New Folder]
And input the new folder name “DATA”, then press [OK].

huperVision 1.51 Hybrid DVR Quick Start Guide
- 11 -
6. The result will be shown when you back to the Add Storage dialogue box.
Please press [OK] button to save the decision.
Note.
Please keep the all 16 cameras be checked even if you don’t have that
much cameras.
Please also do NOT change the Allocated record space value by its
automatic decision.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 12 -
7. After Create the folder and press the [OK] button of the Preference page.
Congratulations! You are start recording videos.
8. The R LED turns green at upper right side, indicates that available
channels is recording now.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 13 -
Simple Steps to Playback Recordings
1. Launch the huperVision Record Player program by clicking the icon
2. You will see the following full screen program to cover the current
huperVision Live view. Don’t worry, the Live View and recording task is still
working at the background.
3. You have to select which channel you want to playback with, or select All
Channels to playback all available channels at the same time.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 14 -
4. After you select the channel you want to playback, it shows a list of time
mark for today’s recording. Please select a Time mark to load the Video
records.
5. All the video available channels will show the first Image in the Video split
area, after the video load progress bar running to the end.
You can now press the Play Button to start playback selected channel
recordings.
6. If you want to select different Channel to playback, please repeat from Step
3 to Step 5.
7. You can press the [Power off] button to Exit this Playback program
any time.
Note.
Press this Power off button will NOT close the running huperVision site
server.
There is also a protection for accident press the huperVision site server
power button, a Confirm dialogue box will show before it really shut down
the huperVision site server main program.
Now you are ready to use huperVision IVS system, for more operation guide
on Intelligent Video Functions, please refer to full Users Manual.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 15 -
Press the [User’s Manual] on the Installation CDROM auto run program.
You will be able to open the Document. Before you load this document, please
ensure your system have already Acrobat Reader program installed.
The Acrobat Reader program is included in the Installation CDROM
E:\English\Doc\aar.exe

huperVision 1.51 Hybrid DVR Quick Start Guide
- 16 -
How to connect IP Cameras / Video Servers
In huperVision V1.5, huperVision start to support IP cameras as Video source
for recording and intelligent analyze. Let’s see How to connect IP cameras
step by step.
1. Click the [Hammer] button . Then select the [Preferences…].
2. Click the [Camera] tab. Let’s start connect IP cameras.
3. When you have Hybrid License card or Pure IP license card installed, the
Camera setting page will show IP1, IP2, IP 3 instead of C1, C2, C3 to
differentiate 2 different Camera type.
4. Let’s select IP1 and Click the [Setting…] button.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 17 -
5. The IP camera setting page pup-up now, please click [Search] button.
6. It will take a while to search all the supported-searchable IP cameras in the
range of local network. Let’s wait for the progress bard running to the end.
7. If you want to change setting of the IP camera, e.g. ID/PW for connection,
please select the IP camera then click [Modify] button.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 18 -
8. After input necessary information, please click the [OK] button to save the
settings.
9. Press another [OK] button to finish this connection setting.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 19 -
10.Back to the Camera page, click the down button to assign the IP camera for
IP1 connection.
Note.
A Star Sign is marked leading the IP camera list to indicate this IP camera
has already been assigned in huperVision system.
huperVision system allows you to do multiple connection to one IP camera
for different purpose, but please note that all IP cameras have it’s
connection limitations or bandwidth limitations. Over load a single IP
camera / Video Server might cause unexpected result.
11.After IP camera assignment, please click [OK] button on this Camera page
to save settings. It may take a few seconds to connect before you can see
the video.

huperVision 1.51 Hybrid DVR Quick Start Guide
- 20 -
How to use Motion Detection
Motion Detection is the basic detection of huperVision, It works like a motion
sensor but with more powerful parameters to control the precision of detection
result.
1. Click the [Hammer] button and select [Preference…] to open the
Preference window.
2. Click the [Camera] tab to bring up all the camera settings.
3. Select C1~16 or IP1~16 button to which camera you want to apply the
motion detection.
e.g. C4 for the 4th camera and it is an Analog camera, IP6 for the 6th
camera and it is an IP camera or Video server.