Husaco HU-001 User manual

Bug Zapper
Model No: HU-001
User manual
1. INTRODUCTION
2. ATTENTION
3. WHERE AND HOW TO USE
4. BULB REPLACEMENT
5. TECHNICAL INORMATION
6. TROUBLESHOOTING
7. GUARANTEE
8. HOW TO ADD DEVICE TO APP
TABLE OF CONTENTS
1.INTRODUCTION
- Thanks for purchasing Our Bug Zapper. please check the condition
of the device before use.
- If the device is damaged, do not use it.
- The device is environmentally safe and hygienic, smoke-free and
non-toxic.
-It does not include pesticides. The built-in lamp is harmless to
people, pets or plants.
- The highly efficient fitting tube emits special ultraviolet waves
and attracts insects, the flying insects are trapped and electrocuted
by the electrically charged metal grids.
-The device is highly efficient and energy-saving. It is designed for
continuous use and is ready to provide you with a long. mosquito-
free pastime for many years.
- For optimal performance, please read this manual carefully
before use.
-Do not use in inflammable and/or explosive locales and alike.
-Do not intend to touch internal high voltage grids because electric
shock danger. Never put metal objects inside the grid during using.
-Hang or place the appliance out of the reach of children.
-Never remove any fixed part of the appliance to make internal
adjustments to avoid electric shock.
-Unplug the appliance before cleaning. Remove insect debris once
a week: just pull out the collection tray of electric bug zapper and
get rid of them.
-Avoid rough shaking that could damage the tube or components.
2.ATTENTION
-The product is Insect Fly Pest Attractant Trap. Bug Zapper for
Outdoor, Indoor, Backyard, Patio, Home.(Waterproof rating:IP4X)
-The product has an energy-saving design and soft lighting, So it
should not be used in high light conditions. Otherwise, it will affect
the destruction of mosquitoes.
-The right methods for using the device are below: for example,
keep the lighting off and use device before sleeping, or keep the
product in the dark place while working.
3.WHERE AND HOW TO USE
-Disconnect the unit from the electric source.
-Open the lamp by twisting the bottom tray in accordance with the
arrows on it.
-Use a screwdriver to remove the screw that holds the plastic gate.
-Now the bulb can be pulled out of its socket.
-Insert the replacement bulb into the socket.
-Mount all parts back
4.BULB REPLACEMENT
To increase the killing rate, please clean mosquitoes stuck in the
grid.
Before cleaning, please keep the power off, Use a screwdriver to
open the plastic grid case. use soft brush to clean Metal grid.
Input voltage: 110V AC, 60Hz
Total Wattage: 20W; Light source: 18W
High voltage metal grid: 4000V
5.TECHNICAL INFORMATION
APP remote control the bug zapper please read the
“8. HOW TO ADD DEVICE TO APP”
Problem Possible Cause Correction
A. The light is off and there is
no high voltage on the grid.
1. There is no electricity.
2. The lamp is not installed
correctly.
3. The burnt out bulb.
1.Check fuse of circuit breaker.
check extension cord.
2.check all sockets for proper fit
and alignment.
3.Replace the light bulb.
B. The light is on, but there is
no high voltage on the grid
1.Sorted grids.
2.The Transformer is defective.
1.Examine the grid and clean it
using an air blower.
2.Replacement by manufacturer
is required.
C. Intermittent or continuous
sparking between grid rods
1.The grid is clogged with foreign
material.
1.Clean the grid using an air
blower.
D. The light is on, but no longer
attracts insects
1. The invisible power of blacklight
is reduced due to the age of the
lamp.
1.Replace the bulb. see bulb
replacement section in the user
manual.
6.TROUBLESHOOTING
-we appreciate your feedback and will do our best to guarantee your
satisfaction.
-One-year warranty. Please email us with your order number or
contact us on Amazon. Your inquiries will be taken care of as soon as
possible.
-This warranty does not cover normal wear of product and damage
caused by misoperation of buyers.
7.GUARANTEE

8. HOW TO ADD DEVICE TO APP
Power Key Description:
Short press to power on / off Bug Zapper.
Long press for 5 seconds to reset the Bug Zapper.
Indicator LED
Download APP:
Scan the following QR code or search "Smart Life" in app
store for iOS version or Google Play for Android version.
Add Device (Way 2):
Step 1: Log in and sign up your "Smart Life" APP;
Step 2: Confirm the phone is connected to WiFi (ONLY
support 2.4G WiFi network), and click the upper right
corner "+" icon in "Smart Life" APP;
Step 3: Select corresponding "Socket (Wi-Fi)" device icon
(The Bug Zapper is Placed in the Socket Category);
Step 4: Input the router password;
Step 5: Power on the Bug Zapper, and confirm that the Bug
Zapper is in the factory mode (Blinks Rapidly);
Step 6: Waiting for connection.
Please scan the QR code with Smart Life to view
the network guidance and add device. Follow the
instructions on the APP interface to add the
device by following.
QR Code Add Device (Way 1)
How to reset the Bug Zapper to the factory
mode?
Long press the button for 5 seconds to reset the Bug Zapper.
The indicator LED will blink, that means the Bug Zapper
already set to factory mode.
How to use the third-party platform for voice
control?
Step1: Open the "Me“ menu bar at bottom of the Smart Life
APP;
Step2:Select “third-party Voice Services…… More”;
Step3: Click on the third-party service platform you want to
access;
Step4: Please follow the instructions on the APP interface to
use the voice control;
During the network configuration, is there
anything that I should pay attention to?
1.If your router is dual-frequency, please set different
passwords for 2.4GHz and 5GHz. Or you can turn off the
5GHz. Please disable the dual-frequency function.
2.lf you still can't connect the smart device with your phone,
please reset the router to factory settings or replace the
router and try again.
Warranty Card
Thank you very much for using our products. Anyone who
purchases our company's product is guaranteed for one year,
and if there are quality problems during warranty period, our
company will repair it for free and provide technical support
and accessories for life. If you meet problems when using our
products, please feel free to contact us.
Husaco
Product Model Number: HU-001 .
Customer Name: .
Customer Phone: .
Maintenance records: .
Tech support : .
Button
Indicator LED Description:
· Indicator LED Light-on means Bug Zapper powers on.
· Indicator LED Light-off means Bug Zapper powers off.
· Indicator LED blink (3 times per second), which means
the Bug Zapper at configuration mode (factory mode).

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.