5. SPECIFICATION
52 –
English
TECHNICAL DATA
Technical data FS5000 D
Saw feature 350/14 500/20 650/26 750/30 900/36
Blade guard capacity, mm/inch 350/14 500/20 650/26 750/30 900/36
Maximum cutting depth, mm/inch 118 (4,75) 193 (7,75) 262 (10,5) 312 (12,5) 374 (15)
Blade shaft, rpm 3197 2400 1855 1598 1331
Approximate blade shaft, HP 42 42 42 42 42
Arbor size, mm/inch 25,4 (1”) with
single drive pin
25,4 (1”) with
single drive pin
25,4 (1”) with
single drive pin
25,4 (1”) with
single drive pin
25,4 (1”) with
single drive pin
Quick disconnect blade flange Ø, mm/inch 114,5 (4,5) 114,5 (4,5) 127 (5) 127 (5) 152,5 (6)
Blade shaft diameter, mm/inch 45 / 1 3/4
Blade shaft bearings Cast sealed blade shaft with 2 maintenance-free ball bearings
Blade shaft drive Dual 6-groove banded 3VX V-belts (12 grooves total)
Blade coolant Zinc plated dual multiple-jet water spray tubes
Blade guard attachment Slip-on, auto-latch
Blade control
Electro-hydraulic pump raises blade; Switched controlled raise/lower on speed
control handle; Switcehed controlled positive depth stop; Cutting depth indicator;
Blade drive disengagement system (clutch); Quick disconnect blade flanges
Axle Ø, mm/inch Front, 25/1
Rear, easy adjust center pivot with 2 hydraulic powered wheel motors
Wheels Front, 203x76x25/8x3x1, thick polyurethane tread, sealed ball bearing requiring
less maintenance
Rear, 254x76x32/10x3x1,25, solid rubber, quick disconnect
Transmission Hydrostatic pump, with 2 hydraulic wheel motors connected with hoses,neutral start
switch, single handle speed control, hydraulic bypass valve for pushing
Max. ground speed Infinitely variable: 0-122 fpm, forward and reverse. 25m/min maximum reverse
speed on CE models
Chassis Heavy duty, rigid, box and channel section construction
Weight (uncrated), kg/Ib 751 (1656) 756 (1667) 761 (1678) 765 (1687) 771 (1700)
Saw dimensions Saw dimensions
A Width, mm/inch 844 / 33 1/4 H Saw length (pointer up, handles
extented), mm/inch 2191 / 86 1/4
B Center to center wheel width, mm/inch Front 518 / 20 3/8 I Max. overall height, mm/inch 1313 / 51 3/4
Rear 646 / 25 3/8
COutside to outside wheel width, mm/
inch
Front 533 / 21 K Min. overall height (rotade pre-
cleaner), mm/inch 1289 / 50 3/4
Rear 609 / 24
D Frame width, mm/inch 635 / 25 L Wheel base lenght, mm/inch 427 / 16 3/4
EInner flange to inner flange width, mm/
inch
726,5 / 28 5/
8MGuard to handle lenght (handles in),
mm/inch 1753 / 69
F Handle extension, mm/inch 809 / 31 7/8 N Max. overall lenght (handles in), mm/
inch 2273 / 89 1/2
GMin. saw lenght (handles removed,
pointer and guard up), mm/inch 1485 / 58 1/2 O Max. overall lenght (handles extended,
pointer down), mm/inch
2964 / 116 3/
4
J
K
H
F
L
G
N
O
P
M
A
E
D
C
B