Hybrid Federal HYBDVR-FE016480 User manual

Hybrid Federal - User's Manual
HYBDVR-FE016480
Analog
960h
Resolution
3yr
Warranty
Our 16 Channel Hybrid Federal Series possess the ability of both our 16 Channel Federal DVR and our 16 Channel Elite NVR, giving you the ability to record 16 Analog
channels alongside 16 Digital Channels providing you a total of 32 Channels in one unit. Get the highest resolution recordings capable from your analog based cameras and
introduce High Denition recordings from our IP based network Mega Pixel cameras.
Our Hybrid Federal Series analog channels records video with a resolution up to 960H (960 x 480 pixels) at a real time frame rate of 30 frames per second. (Note: Any analog
camera is compatible with this unit but to take advantage of the superior image quality you must use a 960h capable camera.) Our Federal Series not only works well with
standard (TVL based) cameras, but it is mainly built to optimize the use of today's newer camera sensors like the Sony Eo-E, P & S series that records in 960H. Which can
captures footage in a wide-screen format that does not need to be stretched to t wide-screen TV's or monitors rather than a standard 4:3 format. Not to mention it is one of
our DVRs that feature an exclusive Dual Gigabit nick card.
What so ever the may be reason and regardless of the application, this Federal Hybrid unit oers you the use of 32 channels of security video consisting of (introducing the
NEW IP based)16 mega pixel cameras and 16 channels of traditional analog capable of recording as high as 960h. The recorded value advantage well over 23 times higher
than the average DVR!
We’re sure you will be impressed with the quality and performance of our 16 Channel Federal Hybrid Ultimate Series H.264 DVR/NVR. In fact we are so condent that you'll
be satised with this unit that we back it with 100% free lifetime technical support with a full 3 year warranty. Just contact our support department with your concerns and
questions and we will be more than obliged to assist and help you solve them. In most instances, we may even be able to remotely set up your unit and/or solve your
problem.
Motion
Activated
Recording
PTZ
Control
IP Network
1080p
Resolution

Table of Contents
1FEATURES AND SPECIFICATIONS .....................................................11
1.1 Overview...........................................................................................................................11
1.2 Features............................................................................................................................11
1.3 Specifications ...................................................................................................................12
2OVERVIEW AND CONTROLS...............................................................17
2.1 Front Panel .......................................................................................................................17
2.2 Rear Panel........................................................................................................................19
2.3 Connection Sample..........................................................................................................20
2.4 Remote Control ................................................................................................................21
2.5 Mouse Control ..................................................................................................................23
2.6 Virtual Keyboard & Front Panel.......................................................................................24
2.6.1 Virtual Keyboard..........................................................................................................24
2.6.2 Front Panel...................................................................................................................25
3INSTALLATION AND CONNECTIONS ..................................................26
3.1 Check Unpacked DVR.....................................................................................................26

3.2 About Front Panel and Real Panel .................................................................................26
3.3 HDD Installation ...............................................................................................................26
3.4 Rack Installation...............................................................................................................27
3.5 Connecting Power Supply ...............................................................................................27
3.6 Connecting Video Input and Output Devices.................................................................27
3.6.1 Connecting Video Input...............................................................................................27
3.7 Connecting Audio Input & Output, Bidirectional Audio..................................................28
3.7.1 Audio Input...................................................................................................................28
3.7.2 Audio Output................................................................................................................28
3.8 Alarm Input and Output Connection ...............................................................................29
3.8.1 Alarm Input and Output Details ..................................................................................30
3.8.2 Alarm Input Port...........................................................................................................31
3.8.3 Alarm Output Port........................................................................................................31
3.9 RS485 ...............................................................................................................................32
4OVERVIEW OF NAVIGATION AND CONTROLS ..................................33
4.1 Login, Logout & Main Menu ............................................................................................33
4.1.1 Login.............................................................................................................................33
4.1.2 Main Menu....................................................................................................................34
4.1.3 Logout...........................................................................................................................34
4.1.4 Auto Resume after Power Failure..............................................................................35
4.1.5 Replace Button Battery...............................................................................................35
4.2 Manual Record .................................................................................................................35
4.2.1 Live Viewing.................................................................................................................35
4.2.2 Manual record..............................................................................................................36

4.3 Search & Playback...........................................................................................................38
4.4 Schedule...........................................................................................................................41
4.4.1 Schedule Menu.................................................................................................................41
4.4.2 Snapshot ......................................................................................................................43
4.4.3 Image FTP....................................................................................................................45
4.4.4 Snapshot Disk (For special series only).....................................................................45
4.5 Detect................................................................................................................................46
4.5.1 Go to Detect Menu ...........................................................................................................46
4.5.2 Motion Detect....................................................................................................................46
4.5.3 Video Loss.........................................................................................................................49
4.5.4 Camera Masking ..............................................................................................................49
4.6 Alarm Setup and Alarm Activation..................................................................................50
4.6.1 Go to alarm setup interface.........................................................................................50
4.6.2 Alarm setup..................................................................................................................50
4.7 Backup ..............................................................................................................................52
4.7.1 Detect Device...................................................................................................................52
4.7.1 Backup..........................................................................................................................53
4.8 PTZ Control and Color Setup..........................................................................................54
4.8.1 Cable Connection.............................................................................................................54
4.8.2 PTZ Setup.........................................................................................................................54
4.8.3 3D Intelligent Positioning Key.........................................................................................56
4.9 Preset/ Patrol/Pattern/Scan.............................................................................................56
4.9.1Preset Setup......................................................................................................................57
4.9.2 Activate Preset.................................................................................................................58
4.9.3 Patrol setup (Tour Setup)................................................................................................58
4.9.4 Activate Patrol (tour)........................................................................................................58
4.9.5 Pattern Setup...................................................................................................................58
4.9.6 Activate Pattern Function................................................................................................59
4.9.7 Auto Scan Setup..............................................................................................................59
4.9.8 Activate Auto Scan..........................................................................................................59
4.10 Flip.....................................................................................................................................59

5UNDERSTANDING OF MENU OPERATIONS AND CONTROLS .........60
5.1 Menu Tree ........................................................................................................................60
5.2 Main Menu ........................................................................................................................60
5.3 Setting...............................................................................................................................61
5.3.1 General.........................................................................................................................61
5.3.2 Encode .........................................................................................................................63
5.3.3 Schedule ......................................................................................................................64
5.3.4 RS232...........................................................................................................................64
5.3.5 Network ........................................................................................................................65
5.3.6 Alarm ............................................................................................................................74
5.3.7 Detect...........................................................................................................................74
5.3.8 Pan/Tilt/Zoom...............................................................................................................74
5.3.9 Display..........................................................................................................................75
5.3.10 Default......................................................................................................................77
5.4 Search...............................................................................................................................78
5.5 Advanced..........................................................................................................................78
5.5.1 HDD Management.......................................................................................................78
5.5.2 Abnormity.....................................................................................................................82
5.5.3 Alarm Output................................................................................................................82
5.5.4 Manual Record.............................................................................................................83
5.5.5 Account.........................................................................................................................83
5.5.6 Auto Maintain...............................................................................................................85
5.5.7 TV Adjust......................................................................................................................86
5.5.8 Video Matrix.................................................................................................................86
5.5.9 Remote Device............................................................................................................87
5.5.10 Text Overlay............................................................................................................88
5.5.11 Config File Backup..................................................................................................90
5.6 Information........................................................................................................................90
5.6.1 HDD Information..........................................................................................................91
5.6.2 BPS...............................................................................................................................92
5.6.3 Log................................................................................................................................92
5.6.4 Version .........................................................................................................................93
5.6.5 Online Users ................................................................................................................94

5.7 Shutdown..........................................................................................................................94
6ABOUT AUXILIARY MENU ....................................................................96
6.1 Go to Pan/Tilt/Zoom Menu ..............................................................................................96
6.1.1 3D Intelligent Positioning Key.....................................................................................97
6.2 Preset /Patrol / Pattern /Border Function..................................................................97
6.2.1 Preset Setup................................................................................................................98
6.2.2 Activate Preset.............................................................................................................98
6.2.3 Patrol Setup.................................................................................................................98
6.2.4 Activate Patrol..............................................................................................................99
6.2.5 Pattern Setup...............................................................................................................99
6.2.6 Activate Pattern Function............................................................................................99
6.2.7 Border Setup................................................................................................................99
6.2.8 Activate Border Function...........................................................................................100
6.2.9 Flip..............................................................................................................................100
7WEB CLIENT OPERATION..................................................................101
7.1 Network Connection.......................................................................................................101
7.2 Login................................................................................................................................101
7.2.1 Real-time Monitor......................................................................................................104
7.2.2 PTZ.............................................................................................................................106
7.2.3 Color...........................................................................................................................108
7.2.4 Picture Path and Record Path..................................................................................109
7.3 Configure ........................................................................................................................110
7.3.1 System Information....................................................................................................110
7.3.2 System Configuration................................................................................................112
7.3.3 Advanced...................................................................................................................133
7.3.4 Additional Function....................................................................................................140
7.4 Search.............................................................................................................................142

7.5 Alarm...............................................................................................................................146
7.6 About...............................................................................................................................147
7.7 Log out ............................................................................................................................147
7.8 Un-install Web Control...................................................................................................148
8PROFESSIONAL SURVEILLANCE SYSTEM......................................149
9FAQ ......................................................................................................150
APPENDIX A HDD CAPACITY CALCULATION .......................................155
APPENDIX B COMPATIBLE BACKUP DEVICES.......................................157
Appendix B-1 Compatible USB list.............................................................................................157
Appendix B-2 Compatible SD Card list.................................................................................158
Appendix B-3 Compatible Portable HDD list........................................................................158
Appendix B-4 Compatible USB DVD List .............................................................................158
Appendix B-5 Compatible SATA DVD List.................................................................................158
Appendix B-6 Compatible SATA HDD List.............................................................................159
APPENDIX C COMPATIBLE CD/DVD BURNER LIST.............................162

APPENDIX D COMPATIBLE DISPLAYER LIST .......................................163
APPENDIX E COMPATIBLE SWITCHER ...................................................164
APPENDIX F COMPATIBLE WIRELESS MOUSE LIST...........................165
APPENDIX G EARTHING .........................................................................166
APPENDIX H TOXIC OR HAZARDOUS MATERIALS OR ELEMENTS......172

Welcome
Thank you for purchasing our DVR!
This user’s manual is designed to be a reference tool for the installation and operation
of your system.
Here you can find information about this series of standalone DVR features and
functions, as well as a detailed menu tree.
Before installation and operation please read the following safeguards and
warnings carefully!

Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
We assume no liability or responsibility for all the fires or electrical shock caused by
improper handling or installation.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation,
storage and installation.
3．Installation
Keep upwards. Handle with care.
Do not apply power to the DVR before completing installation.
Do not place objects on the DVR
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted
repair.
5．Environment
The DVR should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
6. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
7. Lithium battery
Improper battery use may result in fire, explosion, or personal injury!
When replace the battery, please make sure you are using the same model!

1FEATURES AND SPECIFICATIONS
1.1 Overview
The standalone series DVR is an excellent digital monitor product designed for
security field.
It adopts embedded Linux OS to maintain reliable operation. Popular H.264 compression
algorithm and G.711 audio compression technology realize high quality, low bit stream.
Unique frame by frame play function is suitable for detailed analysis. It has various
functions such as record, playback, monitor at the same time and can guarantee audio
video synchronization. This series product has advanced technology and strong network
data transmission function.
This series device adopts embedded design to achieve high security and reliability. It can
work in the local end, and at the same time, when connecting it to the professional
surveillance software (PSS), it can connect to the security network to realize strong
network and remote monitor function.
This series product can be widely used in various areas such as banking,
telecommunication, electric power, interrogation, transportation, intelligent resident zone,
factory, warehouse, resources, and water conservancy.
1.2 Features
This series product has the following features:
Analog and digital mixed input
Support analog and digital signal simultaneously. It can connect to multiple-channel high
definition IPC.
Real-time surveillance
Support analog output port, VGAport and HDMI port. Realize the surveillance through the
monitor or displayer. Support HDMI, VGA, and TV output at the same time.
Storage function
Special data format to guarantee data security and can remove the risk of the vicious data
modification. Support digital watermark.
Compression format
Support multiple-channel audio and video. An independent hardware decodes the audio
and video signal from each channel to maintain video and audio synchronization.
Backup function
Support backup operation via USB port (such as U disk, portable HDD, burner)

Client-end user can download the file to local HDD to backup via network.
Record & playback function
Support each channel real-time record independently, and at the same time it can support
search, forward play, network monitor, record search, download and etc.
Support various playback modes: slow play, fast play, backward play and frame by frame
play.
Support time title overlay so that you can view event accurate occurred time
Support customized zoom function during the preview.
Network operation
Support network remote real-time monitor, remote record search and remote PTZ control.
Alarm activation function
Several relay alarm outputs to realize alarm activation and on-site light control.
The alarm input port and output has the protection circuit to guarantee device safety.
Communication port
RS485 port can realize alarm input and PTZ control.
RS232 port can connect to keyboard to realize central control, and can also connect to PC
COM to upgrade system and realize maintenance, and matrix control.
Standard Ethernet port can realize network access function.
PTZ control
Support PTZ decoder via RS485.
Support various decode protocols to allow the PTZ to control the speed dome.
Intelligent operation
Mouse operation function
In the menu, support copy and paste setup function
UPNP (Universal Plug and Play)
Establish mapping connection between LAN and WAN via UPNP protocol.
Slight function differences may be found due to different series.
1.3 Specifications
Parameter
16-ch
System
Main Processor
High-performance industrial embedded micro controller
OS
Embedded LINUX
System
Resources
Multiplex operations: Multiple-channel record, multiple-channel
playback and network operation simultaneously

Interface
User-friendly graphical user interface
Input Devices
Front panel, USB mouse, remote control
Input Method
Arabic number, English character, donation and extension Chinese
(optional)
Shortcut
Function
Copy/paste operation, USB mouse right-key shortcut menu, double
click USB mouse to switch screen.
Compression
Standard
Video
Compression
H.264
Audio
Compression
G.711
Video monitor
Video Input
4-CH composite
video input:
(NTSC/PAL) BNC
(1.0VBP- P, B75Ω)
8-CH composite video
input: (NTSC/PAL)
BNC (1.0VBP- P, B75Ω)
16-CH composite
video input:
(NTSC/PAL) BNC
(1.0VBP- P, B75Ω)
Video Output
1-ch PAL/NTSC, BNC (1.0VP- P, 75Ω) composite video signal output.
1-ch VGA output.
1-ch HDMI output.
Support TV/VGA/HDMI video output at the same time.
Video Standard
PAL (625 line, 50f/s), NTSC (525 line, 60f/s)
Record Speed
Real-time Mode: PAL 1f/s to 25f/s per channel and NTSC 1f/s to 30f/s
per channel
Video Partition
1/4
windows(Optional)
1/4/8/9/12 windows
1/4/8/9/16 /20
windows
Monitor Touring
Support monitor tour functions such as alarm, motion detection, and
schedule auto control.
Resolution
(PAL/NTSC)
PAL（625TV Line，50f/s）， NTSC（525TV line，60f/s）
Real-time monitor：
D1 704×576/704×480
Playback：
1/16-ch: D1 704×576/704×480 (6f/s, when other channels’
resolution are all CIF, the first channel and the ninth channel can
support 25f/s.) , CIF 352×288/ 352×240 , QCIF 176×144/176×120
Other channels CIF 352×288/ 352×240 、QCIF 176×144/176×
120.
Support dual streams: extra stream resolution QCIF
176×144/176×120
Motion
Detection
Zone setup: support max 396(22×18) zones.
Support various sensitivities.
Image Quality
6-level image quality (Adjustable)
Privacy mask
Support one privacy mask of user-defined size in full screen.
Support max 4 zones.

Image
Information
Channel information, time information and privacy mask zone.
TV Adjust
Adjust TV output zone suitable to anamorphic video.
Channel Lock
Cover secret channel with blue screen though system is encoding
normally.
Screen-lock function to prevent unauthorized user seeing secret video.
Channel
Information
Channel name, recording status, screen lock status, video loss status
and motion detection status are shown on the bottom left of display
screen.
Color
Configuration
Hue, brightness, contrast, saturation and gain setup for each channel.
Audio
Audio Input
4-ch 200-2000mv
10KΩ(BNC)
8-ch 200-2000mv
10KΩ(BNC)
16-ch
200-2000mv
10KΩ (BNC)
Audio Output
1-ch audio output 200-3000mv 5KΩ(BNC)
Bidirectional
Audio
1- ch audio input 200-3000mv 10KΩ(BNC)
1- ch audio output 200-3000mv 5KΩ(BNC)
Hard disk
Hard Disk
8 built-in SATA port. Support 8 HDD.
Hard Disk
Occupation
Audio：PCM 28.8MByte/h
Video：56-900MByte/h
Record and
playback
Recording
Mode
Manual recording, motion detection recording, schedule recording and
alarm recording
Priority: Manual recording> alarm recording>motion detection
recording>schedule recording.
Recording
Length
1 to 120 minutes single record duration (Default setup is 60 minutes)
Playback
Repeat Way
When hard disk is full, system can overwrite previous video file.
Record Search
Various search engines such as time, type and channel.
Playback Mode
Various fast play, slow play speeds, manual frame by frame playback
and reverse play mode.
Various File
Switch Ways
Can switch to previous or next file or any file in current play list.
Can switch to file on other channel of the same time. (If there is a file)
Support file continuous play, when file is end system auto plays the
next file in the current channel
Multi-channel
Playback
Support single channel, 4 channel, 9 channel and 16 channel
modes
Window
Zoom
Switch between self-adaptive screen/full screen when playback

Partial
Enlargement
When in one-window full-screen playback mode, you can select any
zone to activate partial enlargement function.
Backup
function
Backup Mode
HDD backup
Support peripheral USB backup device. (Flash disk, portable disk,
USB burner and etc.)
Support external eSATA device backup
Support network download and backup
Network
Function
Network control
View monitor channel remotely.
DVR configuration through client-end and web browser
Upgrade via client or browser to realize remote maintenance.
View alarm information such as external alarm, motion detection and
video loss via client.
Support network PTZ lens control
File download backup and playback
Multiple devices share information via corresponding software such as
professional surveillance software (PSS)
Duplex transparent COM
Network alarm input and output
Bidirectional audio.
Motion
Detection and
Alarm
Motion
Detection
Zone setup: support 396((PAL 22×18, NTSC 22×15)) detection zones.
Various sensitivity levels.
Alarm can activate record or external alarm or screen message
prompt.
Video Loss
Alarm can activate external alarm or screen message prompt.
External Alarm
Support record activation function or activate external alarm or screen
message in specified period.
Manual Alarm
Control
Enable or disable alarm input channel
Support analog alarm signal to specific alarm output channel.
Alarm Input
4-ch alarm input（You
can set normal open
or normal close type
to select the alarm
type. ）
8-ch alarm input（You can
set normal open or
normal close type to
select the alarm type. ）
16-ch alarm input
（You can set
normal open or
normal close type
to select the
alarm type. ）
Alarm Output
6-channel relay output. (one of them can control DC+12v output)
Alarm Relay
30VDC 2A，125VAC 1A（activation alarm ）
Interface
USB Interface
3USB 2.0 ports. (HF-S/N series supports 2 USB 2.0 )
Network
connection
RJ45 10M/100M/1000M self-adaptable Ethernet port
RS485
PTZ control port
Support various PTZ control protocols.
RS232
Ordinary COM (Debug),keyboard connection and transparent serial
port(COM input and output via network )

System
Information
Hard Disk
Information
Display HDD current status
Data Stream
Statistics
Data stream statistics for each channel (in wave mode)
Log statistics
Backup to 1024 log files.
Support various search engines such as time and type.
Version
Display version information: channel amount, alarm input and output
amount, system version and release date.
On-line user
Display current on-line user
User
Management
User
Management
Multi-lever user management; various management modes
Integrated management for local user, serial port user and network
user.
Configurable user power.
Support user /group and its corresponding rights modification.
No limit to the user or group amount.
Password
Authentication
Password modification
Administrator can modify other user’s password.
Account lock strategy
Five times login failure in thirty minutes may result in account lock.
Upgrade
Web browser, client-end and update tool.
Login, Logout and Shutdown
Password login protection to guarantee safety
User-friendly interface when login. Provide the following options:
Logout /shutdown/ restart.
Right authentication when shut down to make sure only those proper
people can turn off DVR
General
Parameter
Power
AC90~264V 50+2% Hz(Max. 220W)
Power
Consumption
≤25W (Exclude HDD)
Working
Temperature
0℃－＋55℃
Working
Humidity
10%－90%
Air Pressure
86kpa－106kpa
Dimension
440(W) x460(D) x89(H)mm
Weight
6.5－7.5KG (Exclude HDD)
Installation
Mode
Desktop installation

2Overview and Controls
This section provides information about front panel and rear panel. When you install this
series DVR for the first time, please refer to this part first.
2.1 Front Panel
This series products’front panel are shown as below. See Figure 2-1.
Figure 2-1
Please refer to the following sheet for front panel button information.
Name
Icon
Function
Power button
Power button, press this button for three seconds to boot up or
shut down DVR.
Number button
0-9
Input Arabic number
Switch channel
Input number
more than 10
-/--
If you want to input a number more than 10, please click this
button and then input.
Shift

In textbox, click this button to switch between numeral,
English(Small/Capitalized),donation and etc.
Enable or disable tour.
Fast play

Various fast speeds and normal playback.
Slow play
Multiple slow play speeds or normal playback.
Play/Pause

In normal playback click this button to pause playback
In pause mode, click this button to resume playback.
Reverse/Pause

In normal playback or pause mode, click this button to reverse
playback
In reverse playback, click this button to pause playback.
Play previous

In playback mode, playback the previous video
Play Next

In playback mode, playback the next video
In menu setup, go to down ward of the dropdown list.
Up/
Down
、
Activate current control, modify setup, and then move up and
down.

Increase/decrease numeral.
Assistant function such as PTZ menu.
Left/
Right

Shift current activated control, and then move left and right.
When playback, click these buttons to control playback bar.
ESC
ESC
Go to previous menu, or cancel current operation.
When playback, click it to restore real-time monitor mode.
Enter
ENTER
Confirm current operation
Go to default button
Go to menu
Assistant
Fn
One-window monitor mode, click this button to display assistant
function: PTZ control and image color.
Backspace function: in numeral control or text control, press it for
1.5 seconds to delete the previous character before the cursor.
In motion detection setup, working with Fn and direction keys to
realize setup.
In text mode, click it to switch between numeral, English
character(small/capitalized) and etc.
In HDD management interface, you can click it to switch HDD
record information and other information (Menu prompt)
Realize other special functions.
Record
REC
Manually stop/start recording, working with direction keys
or numeral keys to select the recording channel.
Window switch
Mult
Click it to switch one-window/multiple-window.
Shuttle(outer
ring)
In real-time monitor mode it works as left/right direction key.
Playback mode, counter clockwise to forward and clock wise to
backward.
Jog(inner dial)
Up/down direction key.
Playback mode, turn the inner dial to realized frame by frame
playback. (Only applies to some special versions.)
USB port
To connect USB storage device, USB mouse, burner and etc.
Record light
1-32
For 4/8/16 channel device: indication light on means that the
channel is in recording.

For 32 channel device:
Indication Light on: 1-16 channel is in recording
Indication Light flashes: 17-32 channel is in recording
Indication Light normally on: the corresponding channels are in
recording
Remote control
indication light
ACT
Remote control indication light
Status indication
light
Status
If there is Fn indication light, current status indication light is null.
Power indication
light
PWR
Power indication light
IR Receiver
IR
It is to receive the signal from the remote control.
2.2 Rear Panel
This series products’rear panel are shown as below.
See Figure 2-2
Figure 2-2
Please refer to the following sheet for detailed information.
1
Grounding hole
2
Power input port
3
Power button
4
Fan
5
1st to 4th-channel audio input
6
DB25 port (5th to 16th-channel audio input port)
7
Loop video output
8
Video input
9
Video output
10
Bidirectional talk input port
11
Bidirectional talk output port

12
Alarm input/alarm output
13
Video VGA output
14
HDMI port
15
RS-232 port
16
eSATA port
17
USB port
18
Network port
19
Video CVBS output
20
Video matrix output
21
Full duplex RS-485 port
22
Half duplex RS-485 port
When connect the Ethernet port, please use crossover cable to connect the PC and use
the straight cable to connect to the switcher or router.
2.3 Connection Sample