Hyco HD15015 Specification sheet

Product Instruction Manual
HD15015
1.5 kW automatic hair dryer
Version 3.2 Jan 2015
V15.5/2
HD15015_Layout 1 26/05/2015 10:26 Page 1

2
HD15015_Layout 1 26/05/2015 10:26 Page 2

Thank you for purchasing the HD15015 digital hair dryer. The HD15015 is
designed for hotels and similar light commercial applications. This hair dryer
is not suitable for heavy usage applications such as public swimming baths
and sports facilities. Please read and understand these instructions before
commencing installation, and leave them with the user when installation is
complete.
1. Impor an safe y poin s
• The Electrical installation must be carried out by a qualified electrician in
accordance with the current edition of the I.E.E. Wiring Regulations.
• Means for electrical disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules.
• Only connect the hair dryer to a single phase supply with a mains voltage as
specified on the rating plate.
• The hair dryer must be fixed out of reach of a person taking a bath or a shower.
• This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made
by children without supervision.
• This model is rated IP24. ite unit accordingly.
3
HD15015_Layout 1 26/05/2015 10:26 Page 3

2. Ins alla ion
Wall Moun ing
The hair dryer must be fixed out of reach of a person taking a bath or a shower.
This model is rated IP24. ite unit accordingly.
• Using the template provided, drill 2 holes of 6mm diameter at the marked locations.
• Fix the installation bracket to the top hole using the supplied screw and plug.
• Open the access plate located on the base of the unit beneath the shaver socket
using a cross head screwdriver.
• Hook the top of the unit to the wall bracket and secure to the wall using the
lower screw.
Elec rical
Means for electrical disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
• This unit is double insulated, the power cord should be connected following
the colour coding below:
➢Brown: L
➢Blue: N
• It is possible to connect a cable directly to the back of the unit so that there is no
wiring visible to the user. There is a knockout disc next to the terminal block that
is designed to give cable access for this purpose.
4
HD15015_Layout 1 26/05/2015 10:26 Page 4

3. Opera ion
Remove the nozzle from the base unit to start operation.
The green LCD will immediately light up and the dryer will blow warm air at the default
temperature setting of about 60°C.
To adjust the temperature press the “+” or “-“buttons on the front of the unit.
The current temperature is displayed, along with the remaining minutes before the
unit automatically shuts down.
This unit will start and stop automatically when the nozzle is removed from
the base and will automatically switch off after approximately 18 minutes of
continuous use. To reset the timer replace the nozzle.
4. Main enance
• Clean the exterior of the unit using a soft, damp cloth.
5
HD15015_Layout 1 26/05/2015 10:26 Page 5

5. Specifica ions
Voltage 230v~50Hz
Power 1.5kW
IP Rating IP24
Weight 2.3kg
110mm
205mm
270mm
580mm
6
HD15015_Layout 1 26/05/2015 10:26 Page 6

6. Guaran ee and service policy
This product is guaranteed against faulty materials and manufacture for a period of one
year from the date of purchase. Hyco will in its sole discretion replace, repair or refund
any faulty unit. Incorrect installation and failure to follow correct operating instructions
are excluded. Consequential costs such as labour charges or damage to surroundings
are expressly excluded.
7
HD15015_Layout 1 26/05/2015 10:26 Page 7

hyco.co.uk
Hyco Manufacturing Ltd
Normandy Court
Express Way
Castleford, WF10 5NR
T 01924 225 200
F 01924 225 210
E [e-mail]
INFORMATION FOR CORRECT DI PO AL OF THE PRODUCT IN ACCORDANCE WITH THE
EUROPEAN DIRECTIVE 2002/96/E.
At the end of its working life this equipment must not be disposed of as household
waste. It must be taken to a local authority waste collection centre or to a dealer
providing this service. Disposing of electrical and electronic equipment separately
enables its components to be recovered and recycled to obtain significant savings in
energy and resources. In order to underline the duty to dispose of this equipment
separately, the product is marked with a crossed out dustbin.
HD15015_Layout 1 26/05/2015 10:26 Page 8