Hyco HD700 User manual
Product Instruction Manual
HD700
0.7 kW automatic hair dryer
Version 3.2 Jan 2015
V15.5/2
HD700_Layout 1 26/05/2015 10:25 Page 1
2
HD700_Layout 1 26/05/2015 10:25 Page 2
Thank you for purchasing the HD700 automatic hair dryer. The HD700 is
designed for hotels and similar light commercial applications. This hair dryer
is not suitable for heavy usage applications such as public swimming baths
and sports facilities. Please read and understand these instructions before
commencing installation, and leave them with the user when installation
is complete.
1. Important afety point
• The Electrical installation must be carried out by a qualified electrician in accordance
with the current edition of the I.E.E. Wiring Regulations.
• Means for electrical disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules.
• Only connect the hair dryer to a single phase supply with a mains voltage as
specified on the rating plate.
• The hair dryer must be fixed out of reach of a person taking a bath or a shower.
• This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made
by children without supervision.
• This model is rated IP21. Site unit accordingly.
3
HD700_Layout 1 26/05/2015 10:25 Page 3
2. In tallation
Wall Mounting
The hair dryer must be fixed out of reach of a person taking a bath or a shower.
This model is rated IP21. Site unit accordingly.
• Drill a 6mm hole at the required location at the top of the base unit.
Drill a second 6mm hole 267mm vertically below the first hole.
• Fix the installation bracket to the lower hole using the supplied screw and plug.
The bracket should point upwards.
• Open the access plate located on the top of the unit using a cross head screwdriver
and identify the upper rectangular fixing hole at the very top of the unit.
• Hook the bottom of the unit to the wall bracket and secure to the wall using
the remaining screw heater is securely fixed to the wall.
Electrical
Means for electrical disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
• This unit is double insulated, the power cord should be connected following
the colour coding below:
➢Brown: L
➢Blue: N
• It is possible to connect a cable directly to the back of the unit so that there is no
wiring visible to the user. There is a knockout disc next to the terminal block that
is designed to give cable access for this purpose.
4
HD700_Layout 1 26/05/2015 10:25 Page 4
3. Operation
Remove the nozzle from the base unit to start operation. Return to stop.
This unit will start and stop automatically when the nozzle is removed from
the base and will automatically switch off after approximately 15 minutes of
continuous use. To reset the timer replace the nozzle.
4. Maintenance
• Clean the exterior of the unit using a soft, damp cloth.
5
HD700_Layout 1 26/05/2015 10:25 Page 5
5. Specification
Voltage 230v~50Hz
Power 0.7kW
IP Rating IP21
Weight 2.2kg
90mm
200mm
297mm
600mm
6
HD700_Layout 1 26/05/2015 10:25 Page 6
6. Guarantee and ervice policy
This product is guaranteed against faulty materials and manufacture for a period of one
year from the date of purchase. Hyco will in its sole discretion replace, repair or refund
any faulty unit. Incorrect installation and failure to follow correct operating instructions
are excluded. Consequential costs such as labour charges or damage to surroundings
are expressly excluded.
7
HD700_Layout 1 26/05/2015 10:25 Page 7
hyco.co.uk
Hyco Manufacturing Ltd
Normandy Court
Express Way
Castleford, WF10 5NR
T 01924 225 200
F 01924 225 210
E sales@hyco.co.uk
INFORMATION FOR CORRECT DISPOSAL OF THE PROD CT IN ACCORDANCE WITH THE
E ROPEAN DIRECTIVE 2002/96/E.
At the end of its working life this equipment must not be disposed of as household
waste. It must be taken to a local authority waste collection centre or to a dealer
providing this service. Disposing of electrical and electronic equipment separately
enables its components to be recovered and recycled to obtain significant savings in
energy and resources. In order to underline the duty to dispose of this equipment
separately, the product is marked with a crossed out dustbin.
HD700_Layout 1 26/05/2015 10:25 Page 8
Table of contents
Other Hyco Hair Dryer manuals
