Hyco HD15015 User manual

Hyco Manufac uring L d
California Drive
Castleford
WF10 5QH
Tel [phone]
www.hyco.co.uk
version 1.1 Nov 2007
FYK0345 HD15015 Manual:DYK0583 HD15015 Manual 16/11/07 09:26 Page 1

Warran y
his product is guaranteed for a period of one year against faulty components or workmanship.
In the event of w rr nty f ilure, Hyco will t its sole discretion rep ir or repl ce the unit.
Unless expressly agreed in writing, this guarantee does not provide for on-site labour costs.
Consequential costs are excluded.
Produc Fea ures
The HD15015 W ll Mounted H ir Dryer is suit ble for hotels, gyms nd simil r pplic tions.
Because all the electrical and heating components are located within the fixed wall mounted body of the
product this unit is generally safer than a portable hair drying appliance.
It remains essential that the unit location is consistent with the product IP rating and that due regard
is paid to the possibility of vandalism.
This model will st rt nd stop utom tic lly when the nozzle is removed from the b se nd will
utom tic lly switch off fter pproxim tely 18 minutes of continuous use. To reset the timer repl ce
the nozzle.
The HD15015 model fe tures US/UK/Europe n r zor socket nd electronic djust ble outlet ir
temper ture control complete with n LCD displ y indic ting rem ining running time nd the current
temper ture selected.
Model HD15015
Power 1500W 230V 50Hz
IP R ting IPX1
CE Approv ls EN-60335 CE LVD/EMC
Hyco Manufac uring L d
Hyco W ll Mounted H ir Dryer
Technical specifica ion
General
hank you for purchasing a product from Hyco Manufacturing Ltd.
Ple se re d these guidelines before inst ll tion. If in ny doubt, seek the dvice of qu lified
electrici n or c ll our technic l support line on 01977 517555.
Elec rical Connec ion
Connection must be in accordance with the latest Edition of the Wiring Regulations.
he unit is pre-wired with a UK plug, but note that for bathroom use a direct connection to a fused spur
is required.
It is possible to connect c ble directly to the b ck of the unit so th t there is no wiring visible to
the user. There is knockout disk next to the pre-wired flex exit th t is designed to give c ble ccess
for this purpose.
If improved ccess to the termin l block or c ble grip is required it is possible to remove the front
cover by undoing the four recessed screws on the b ckpl te. The termin l block should be ccessible
with the cover closed. If it is not, open the cover to re-position in more convenient loc tion.
Opera ion
Remove the nozzle from the base unit to start operation.
The green LCD will immedi tely light up nd the dryer will blow w rm ir t the def ult temper ture
setting of bout 60 degrees °C.
o adjust the temperature press the “+” or “-“ buttons on front of the unit.
The current temper ture is displ yed, long with the rem ining minutes before the unit
utom tic lly shuts down.
Clean product by wiping with a damp cloth. Do not use abrasive compounds or solvents.
Technical Suppor
If you experience difficulties call our technical support on 01977 517555 between
8:30 and 5pm Monday to Friday.
Goods should not be returned without first cont cting the m nuf cturer nd obt ining returns
uthoris tion number.
Hyco Manufac uring L d
California Drive, Castleford WF10 5QH
Tel [phone]
www.hyco.co.uk
Ins alla ion
his model is rated IPX1. Site unit accordingly.
Use the enclosed templ te to drill 2 holes of 6mm di meter t the m rked loc tions.
Fix the supplied plastic bracket to the top hole using the supplied screw and plug.
Open the ccess pl te loc ted on the b se of the unit bene th the sh ver socket using cross he d
screwdriver.
Hook the top of the unit to the wall bracket and secure to the wall using the lower screw.
FYK0345 HD15015 Manual:DYK0583 HD15015 Manual 16/11/07 09:26 Page 2