Hydrogen For Health H2Life BGv4 User manual

Brown’s Gas Therapy Machine v4.0
H2Life BGv4
User’s Manual

Table of contents 2
Part List..................................................................
BG4 Machine Diagram...........................................
Installation Manual.................................................
Operation Instructions............................................
Troubleshooting....................................................
Maintenance.........................................................
Warranty...............................................................
Legal Disclaimer...................................................
3
4
5
8
12
13
17
18

Items shown are not to scale
Part List 3
Brown’s Gas Therapy Machine
Stone Diffuser
Cannula
Water Trap
Measuring Spoon
Bottle of Lye
Collapsible Funnel Drain Hose
Note
This system requires Destillated Water to operate which is not included.
This item is available in most grocery stores. Reverse osmosis water,
tap water, bottled water or any other kind of water will not work.

Diagram 4
Lye Water Tank
Water Level
Screen
Outlet Port
Drain Port
Bubbler Tank
Relief Valve
Tank Cap
On/Off Button
Drain Valve

Installation Manual 5
1
Perform a visual inspection of the machine. Look for any damage that may have
occurred during shipping. Contact us if there is any damage to the machine or to
any of the accessories. Our contact information is at the end of this document.
2
Open up the lye water tank cap, as shown below:
3
Deposit two spoon-fulls of lye into the Lye Water Tank. Use provided spoon for
measuring. We suggest you also use a small cup to pour the lye into. So it’s
easier to fill up the spoon.
CAUTION
Lye’s contact with skin can cause severe skin burns. Be careful when
handling Lye. Use of nitrile gloves is recommended.

Installation Manual 6
4
Fill up the Lye Water Tank with distilled water using provided funnel.
Be careful not to overflow the tank. Pay attention to the water level indicator.
Fill up to just below the full line.
5
Put Lye Water Tank cap back in place. Make sure to tighten well.
6
Fill up Bubbler tank with distilled water by taking off the tank’s cap. Make use of
provided funnel. You may pull the tank’s valve up so the tank fills up quicker.
7
Put Bubbler Tank cap back in place. Make sure to tighten well.
Note
Make sure the tank’s valve snaps back down.

Screen Diagram 7
Play/Pause button
Substract 10min
Time
Weight Indicator Bar
Add 30min
Frequency
Weight
Maintenance Indicator
Dim Screen
Temperature

Operation Instructions 8
1
Click on the “Time” button to change to the desired operation time. Dial in your
desired operation time. Click on “ok” to confirm change.
2
Click on the “Weight” button to dial in your weight.
Click on “ok” to confirm change.

Operation Instructions 9
3
Click on the “Frequency” button to set the desired frequency.
Click “ok” to confirm changes.
4
Start your inhalation session by pressing the play button.

Operation Instructions 10
5
Plug your choice of Nasal Cannula or Diffuser Stone into the outlet port
as shown below:
6
You may add 30min or subtract 10min by pressing the following buttons:
Note
If diffuser stone is plugged in make sure to set the weight to 255lbs