Hydrogen For Health H2Pro 300 User manual

Pure Molecular Hydrogen Inhaler Machine
H2Pro 300/600
User’s Manual

Table of contents 2
Part List..................................................................
H2Pro 300/600 Machine Diagram..........................
Installation Manual.................................................
Operation Instructions............................................
Troubleshooting....................................................
Maintenance.........................................................
Warranty...............................................................
Legal Disclaimer...................................................
3
4
5
8
13
14
16
17

Items shown are not to scale
Part List 3
H2Pro 300/600 Machine
Stone Diffuser
Cannula
“T” Splitter
Clear Plastic Hoses
Gray Plastic Hose
Power Cord
Note
This system requires Distilled Water to operate which is not included.
This item is available in most grocery stores. Reverse osmosis water,
tap water, bottled water or any other kind of water will not work.

Diagram 4
Water Tank
LED Indicators
Display
Start/Pause Button
Increase Time Button
Power On/Off Button
Sleep Button
Decrease Time Button
Hydrogen
Outlet Port
Oxygen
Outlet Port
Tank Cap

Installation Manual 5
1
Perform a visual inspection of the machine. Look for any damage that may have
occurred during shipping. Contact us if there is any damage to the machine or to
any of the accessories. Our contact information is at the end of this document.
2
Open up the water tank lid and take out the cap by turning it counter clockwise,
as shown below:
3
Fill up the Water Tank with distilled water. Be careful not to overflow the tank. Pay
attention to the water level indicator. Fill up to just below the full line. As shown:

Installation Manual 6
4
Put the cap back in place. Make sure to turn it clockwise to fix it in place. Close the
water tank lid, as shown below:
5
Attach power cord and plug it in to a wall outlet
6
Open up both oxygen and hydrogen ports, as shown below:
Note
You must open both ports even if you only plan on using one of them.

Installation Manual 7
7
Flip the power switch on the back of your machine to the “on” position.

Operation Instructions 8
1
Press the On/Off button to turn the machine on. You’ll hear a welcome message.
2
Set up your desired operation time by pressing the buttons shown below:
3
To start the production of Hydrogen and Oxygen press the play button:
Note
You’ll hear a confirmation message and you will also see the Work green LED turn on.

Operation Instructions 9
4
Feel free to pause the operation at any time by pressing the play button:
Note
Press the “Sleep” button to dim the screen and the machine’s internal lights. You may use this
function when using your H2Pro300/600 machine in dark environments or when sleeping.

Operation Instructions 10
Using your H2Pro 300/600 machine to inhale Hydrogen
1
Insert the cannula into the Hydrogen outlet port on the side of the machine, as shown:
Note
Check for water inside the water trap. To pour the water inside simply open it up from the
center, as shown: