HYOSUNG GV 250 EFI User manual

Part No. 99011HJ8210FI
JUL. 2008.
Printed in KOREA
1st Ed.
This owner’s manual contains important safety information.
Please read it carefully.
WARNING
Aquila250˙¥` 2008.7.30 4:1 PM ˘ ` 1 JINSUN 300DPI 100LPI W

1
This manual should be considered a permanent part of the motorcycle and
should remain with the motorcycle when resold or otherwise transferred to
a new owner or operator. The manual contains important safety
information and instructions which should be read carefully before
operating the motorcycle.
Aquila250‡»` 2008.7.30 3:47 PM ˘ ` 1 JINSUN 300DPI 100LPI W

2
All information, illustrations photographs
and specifications contained in this manual
are based on the latest product information
available at the time of publication. Due to
improvements or other changes, there may
be some discrepancies in this manual.
Hyosung reserves the right to make
changes at any time.
Please note that this manual applies to all
specifications for all respective destinations
and explains all equipments. Therefore,
your model may have different standard
features than shown in this manual.
 COPYRIGHT S&T Motors Co., Ltd.
FOREWORD
THANK YOU for choosing Hyosung
motorcycle. We at Hyosung have
designed, tested and produced this
motorcycle using the most modern
technology available to provide you with
much happy, enjoyable, safe riding.
Motorcycling is one of the most exhilarating
sports and insure your riding enjoyment,
you should become thoroughly familiar with
the information presented in this Owner's
Manual before riding the motorcycle.
The proper care and maintenance that
your motorcycle requires are outlined in this
manual.
By following these instructions explicitly
you will insure a long trouble-free operating
life for your motorcycle. Your Hyosung
dealer has experienced technicians that are
trained to provide your machine with the
best possible service with the right tools and
equipment.
Aquila250‡»` 2008.7.30 3:47 PM ˘ ` 2 JINSUN 300DPI 100LPI W

3
IMPORTANT
BREAK-IN INFORMATION FOR
YOUR MOTORCYCLE
The first 1,600 km (1,000 miles) are the
most important in the life of your motorcycle.
Proper break-in operation during this time
will help ensure maximum life and
performance from your new motorcycle.
Hyosung parts are manufactured of high
quality materials, and manufactured parts
are finished to close tolerances. Proper
break-in operation allows the machined
surfaces to polish each other and mate
smoothly.
Motorcycle reliability and performance
depend on special care and restraint
exercise during the break-in period. It is
especially important that you avoid
operating the engine in a manner which
could expose the engine parts to excessive
heat.
Please refer to the BREAK-IN section for
specific break-in recommendations.
WARNING / CAUTION / NOTE
Please read this manual and follow its
instructions carefully.
To emphasize special information the
wordsWARNING,CAUTIONand
NOTEhave special meanings.
Information following these signal words
should be carefully reviewed.
N O T E
This provides special information to
make maintenance easier or important
instructions clearer.
These instructions point out special
service procedures or precautions that
must be followed to avoid damaging the
machine.
CAUTION
The personal safety of the rider may be
involved. Disregarding this information
could result in injury to the rider.
WARNING
Aquila250‡»` 2008.7.30 3:47 PM ˘ ` 3 JINSUN 300DPI 100LPI W

4
Noise Control System (muffler assembly)
TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED
Owners are warned that the law may prohibit :
(a) The removal or rendering inoperative by any person other than for the
purpose of maintenance, repair or replacement, of any device or
element of design incorporated into any new vehicle for the purpose of
noise control prior to its any sale or delivery to the ultimate purchaser or
while it is in use ; and
(b) The use of the vehicle after such device or element of design has been
removed or rendered inoperative by any person.
MAINTENANCE :
The exhaust system of this motorcycle requires no periodic maintenance.
The engine should be adjusted to the manufacture’s specifications and the
spark plug should be kept in good condition. Running the engine with
incorrectly operating spark plug or misadjusted carburetor may cause
permanent damage to the catalyst and to the noise control system.
WARNING
Aquila250‡»` 2008.7.30 3:47 PM ˘ ` 4 JINSUN 300DPI 100LPI W