Hytronik HBP01 Quick guide

1. Technical Specifications
Installation and Instruction Manual
2. Installation
Protocol
7 dBm
2.4 GHz - 2.483 GHz
Operation frequency
Transmission power
Range (Typical indoor)
Protocol
10~30m
5.0 SIG Mesh
Stand-by power
Operating voltage
<1W
220~240VAC 50/60Hz
Operation temperature
20% ~ 90%
Relative humidity
Ta: 0OC~ +40OC
EMC standard (EMC)
Safety standard (LVD)
Certification
EN55015, EN61000, EN61547
CB, CE , EMC, RED, RCM
EN60669-1/-2-1
AS/NZS60669-1/-2-1
RED
EN300328, EN301489-1/-17
IP20 IP rating
Free App for set-up and commissioning
3. Download the App
4. Operation
iOS 10.0 or later
Android 5.0 or later
HBP01
Wire Preparation
0.75 - 1.5 mm
8mm
Wire Preparation
Rising clamp terminal.
To make or release the wire from the terminal, use a screwdriver
to push down the button.
35.6
12.1
Ø 56
59
59
Ø 3.4
Ø 6.8
86
N
N
HBP01
L
L
Mechanical Structure & Dimensions
Wiring Diagram
The touch panel HBP01 can keep the time runing for up to 7-8 weeks against power
failure.
▲
WARM
COOL
▲
▲
DOWN
UP
▲
Brightness
Control
Tunable
White
Control
Scenes are simply programmed using the App.
Create and name the scenes using the scenes menu, and then assign the
scenes to buttons from the device settings menu.
Scene Recall
The ON/OFF button has a configurable response via the App.
Turning off via the ON/OFF button will suspend the entire system, including
occupancy sensor. Pressing this button again will resume the last automatic
profile selected, or pressing any other button on the control panel will wake
up the system.
Long press this button for more than 5s to go to clean mode (during this clean mode, the
touch panel screen will be locked and does not respond to any touch), it will quit automatically
after 1min.
2) Clean Mode
1) Permanent OFF (Occupancy sensor disabled).
Touch Indications
Real-time Sustainability
Three methods for successful touch indications:
Vibration / Beeper / LED indicator
User can select any one, two or all of them to indicate successful touch on HBP01 in the App.
1 2 3 4
1 2 3 4
scenes to buttons from the device settings menu.
scenes to buttons from the device settings menu.
Touch Panel with 5.0 SIG Mesh
HBP01-20200303-A0
Turning off via the ON/OFF button will suspend the entire system, including
occupancy sensor. Pressing this button again will resume the last automatic
profile selected, or pressing any other button on the control panel will wake
up the system.
Long press this button for more than 5s to go to clean mode (during this clean mode, the
2) Clean Mode
1) Permanent OFF (Occupancy sensor disabled).
N
L
Wiring Diagram

HBP01-20200303-A0
Subject to change without notice.
5. Additional Information / Documents
1. Regarding precautions for Bluetooth product installation and operation, please kindly refer to
www.hytronik.com/download/knowledge ->
Bluetooth Products - Precautions for Product Installation and Operation
2. Data sheet is subject to change without notice. Please always refer to the most recent release on
www.hytronik.com/products/bluetooth technology ->Bluetooth Accessories
3. Regarding Hytronik standard guarantee policy, please refer to
www.hytronik.com/download/knowledge ->Hytronik Standard Guarantee Policy