Hyundai Electronics HYDCCHGFANSA User manual

RECHARGERBLE FAN
DC MOTOR
HYDCCHGFANSA

TABLE OF CONTENTS
1. PRODUCT DESCRIPTION
2. PRODUCT SPECIFICATION
3. IMPORTANT SAFETY INSTRUCTIONS
4. OPERATING INSTRUCTIONS
5. CLEANING OR MAINTENANCE
PRODUCT DESCRIPTION
1 Front guar
2 Front shell
3 Bla e nut
4 Bla e
5 Motor hol er
6 Motor
7 Control panel
8 Base
9 Belt han le
10 Back guar
11 Switch
12 USB (Micro B)
13 Remote control
IMPORTANT SAFETY INSTRUCTIONS
● Please rea an un erstan this Instruction Manual before operating.
● MAKE SURE that all electrical connections are clean.
1

● Before use, check that the voltage power correspon s to the one shown on the
appliance nameplate.
● Do not close to the fire, water, flammable.
● Supervision require if use by or near chil .
● MAKE SURE that the fan is on a flat an secure surface before use.
● If unuse for long time, please isconnect the power supply, pull out the plug again.
PRODUCT SPECIFICATIONS
Mo el HYDCCHGFANSA
Rate voltage DC5V
Rate power 15W
Net weight 1.6±0.2kg
Fan size W250*D247*H335mm
Battery capacity 4400mAh
Charging time 4-5 hours
Usable time Max 4 hours; Min 1 hour.
OPERATING INSTRUCTIONS
● Making sure the fan is off before plug in.
● Power Input is 5V/2A.
●On/OFF Button
＊When plugge in the fan will isplay the room temperature on the isplay.
＊When the fan is running in the charging state, try to operate at a low win to avoi the
a apter overloa .
＊Pressing the On/OFF button for the first time, the fan will start.
＊Pressing the On/Off button for the secon time, the fan will slow own an stop.
●Speed Button
＊Press the spee button on the control panel /remote control to a just the air flow fan
spee . There are 12 fan spee s available. A just the fan win spee from 1 to 12
cycle. If press for more than a secon , it will auto-increment.
2

＊There is win spee function memory when plugge in.
●ECO function
＊ECO function can only be operate with the remote control.
＊Press on the icon, the fan spee will automatically change as per the table below.
Roo te perature Fan speed
＜23°C 2
23 to 25°C 4
25 to 27°C 6
27 to 29°C 8
29 to 31°C 9
31 to 33°C 10
＞33°C 12
●Ti er
＊When the fan is stan by state, you can use the timer button to set an interval
between, in 30 minute segments, 1 to 6 hours after which the fan will turn ON.
＊When the fan is turne on an running, you can use the timer button to set an
interval, in 30 minute segments, between 1 to 6 hours after which the fan will turn
OFF.
●Oscillation Buttons (OSC)
＊This button can be use to start an stop the si eways oscillation left an right. Press
once to turn the oscillation on an press again to stop the motion, in oing so you can
fix the irection of the fan.
＊The up an own angle can be fixe manual by han , please one han on the base
an one han on the top of the fan an gently move the hea up or own as
require .
●Re ote control
＊(Light): Press this button to turn off all lights of the fan. Press any other button to turn
on the light.
＊(Mute): Press this button, all the fan button prompt soun is off, press this button
again, the soun is on.
＊Before use, please remove the insulator from the battery box.
＊The receiving istance of the remote control is about 3 meters, an the receiving
Angle is about 30 egrees to 45 egrees.
＊If the remote control is close to the fan but cannot be use , please replace the
battery.
＊Incorrect installation will result in battery leakage an corrosion, an amage to the
remote control.
＊When the remote control is not use for a long time, please take out the battery to
3

avoi battery leakage.
＊The replacement of the remote control is shown in the picture.
CLEANING OR MAINTENANCE
＊Make sure that the appliance is switche OFF, unplugge an completely cool
before cleaning or attempting to store the item.
＊Press the four locks (see below first picture), you can be isassemble the front
guar .
＊Clockwise the bla e nut on the bla e an ischarge the bla e. (see below the
secon picture)
＊You can clean the front guar , bla e, bla e nut with water.
＊You can clean the house with neutral soft cloth.（see below the last picture）
＊You nee to reassemble after cleaning.
I. Do not immerse, or any other chemical liqui . Wipe the exterior with a soft amp
cloth or sponge.
II. Remove stubborn spots with a cloth moistene with mil liqui etergent.
III. Do not use abrasive scouring pa s or pow ers.
User manual is subject to change without notice. For the latest version of your user
manual, please visit https://www.kogan.com/usermanuals/. For further assistance, you
can visit the Kogan.com Help Centre at https://help.kogan.com/.
4

Imported/Distributed by Kogan Australia Pty Ltd
Licensed by HYUNDAI Corporation Holdings, Korea
Kogan Australia Pty Ltd
139 GLADSTONE STREET SOUTH MELBOURNE, VIC 3205 AUSTRALIA
https://help.kogan.com/