I-CAN 1110TH ISLAND User manual

2
1110TH Island
All Rights Reserved
The product described in this manual is protected by national and international copyright laws. Any
duplication of the software or hardware comprising the product is strictly prohibited. In addition,
no part of this manual may be reproduced or transmitted, in any form or by any means, electronic
or mechanical, including photocopying, recording, or information storage and retrieval systems, for
any purpose other than the purchaser’s personal use, without the prior written permission of the
manufacturer.
Disclaimer
The manufacturer specifically disclaims all warranties, either express or implied, including but not
limited to merchantability, accuracy, completeness, noninfringement or fitness for a particular
purpose, with respect to the software, the accompanying product manual(s) and written materials,
and any accompanying hardware. The manufacturer reserves the right to revise or make improve-
ments to its product and related materials at any time and without obligation to notify any person
of such revisions or improvements. In no event shall the manufacturer be liable for any special,
incidental, consequential or punitive damages, including any loss of business profits or any other
commercial damages, arising out of the use of its product.
Trademarks
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trade-
marks of HDMI Licensing LLC.
ADB Logo and i-CAN Logo are trademarks or registered trademarks of ADVANCED DIGITAL
BROADCAST S.A.
All other product or service names are the property of their respective owners.

3
1110TH Island
Safety First
Maintenance
If you wish to clean your decoder, first unplug it from the mains. To clean the decoder, use a soft,
dry cloth. For very dirty surfaces, dip a soft cloth in a weak soap-and-water solution and wring
well. After cleaning, wipe with a soft, dry cloth.
Never use alcohol, paint thinner, or a chemically treated cloth to clean this unit. Such chemicals may
damage the unit’s finishing.
This digital decoder has been manufactured to
meet international safety standards. However,
safety precautions must be followed to ensure
the safe and reliable operation of the decoder.
Please take note of the following guidelines to
avoid the risk of an electric shock.
This decoder operates with an external
power supply in the range of 100 to 240V
AC, 50/60 Hz. Use a standard AC wall out-
let; a DC power source cannot be used. Re-
member that contact with a 110-240 Volt
AC power supply can be lethal.
Ensure that all electrical connections are
properly made before connecting the de-
coder to the power supply (the mains). Al-
ways unplug the decoder (from the mains)
before connecting or disconnecting any
cables.
Whenever you connect the decoder to the
power supply (the mains), always connect
the power lead to the power input connec-
tor on the back panel of the decoder before
you connect the power brick to the wall
socket (outlet).
Whenever you disconnect the decoder
from the power supply, always remove the
power brick from the wall socket (outlet)
before you remove the other end of the
lead from the power input connector on
the back panel of the decoder.
Never attempt to repair or reconstruct the
decoder yourself. A serious electric shock
may occur if this decoder is repaired, disas-
sembled or reconstructed by an unauthor-
ized person.
Be extremely careful if this unit comes into
contact with water. Immediately disconnect
the power brick if possible.
DO
If anything falls into the cabinet, unplug the
decoder and have it checked by a qualified
technician.
Allow adequate air circulation to prevent in-
ternal heat build-up. Do not place the unit
next to a radiator or any heat source and
make sure that the air vents are not cov-
ered.
DO NOT
Do not expose the decoder to extreme tem-
peratures, direct sunlight or high humidity.
Do not place any objects on top of the de-
coder which restrict air circulation.
Do not place the decoder on fabric furni-
shings, carpets or other flammable materials.





Removing the decoder’s
cover may lead to a severe &
potentially fatal electric shock.

4
1110TH Island
Contents
Safety First............................................................................................................................... 3
Maintenance............................................................................................................................ 3
Introduction............................................................................................................................. 6
About This Manual .............................................................................................. 6
About Your Decoder (Set-Top Box) ....................................................................... 6
Your Decoder........................................................................................................................... 7
Unpacking Your Digital Decoder ..................................................................................... 7
Overall Look ................................................................................................................... 7
Back Panel ..................................................................................................................... 8
Connectivity Diagram .................................................................................................. 8
Connecting the decoder to your TV...................................................................... 9
Connecting the decoder to your VCR.................................................................... 9
Connecting the decoder to your Home Cinema System......................................... 9
Smart Card .................................................................................................................... 9
Looking After Your Smart Card............................................................................. 9
Remote Control ......................................................................................................................10
How to Set up Your Decoder ..................................................................................................12
Welcome Screen ...........................................................................................................12
Select Language ............................................................................................................12
Channel Numbering Method .........................................................................................12
Channel Search..............................................................................................................13
TV Screen Format................................................................................................13
Resolution Change ..............................................................................................13
Using Your Decoder ..............................................................................................................14
Turning Your Decoder On / Off ......................................................................................14
Basic Rule “Point & Select” ............................................................................................14
Selecting Channels ........................................................................................................14
Channel Banner ............................................................................................................15
Browsing through Channels and Programs in the Channel Banner........................15
Extended Information About Programs .........................................................................17
Channel List...................................................................................................................17
Options Menu ...............................................................................................................18
Audio Language ..................................................................................................18
Subtitle Language................................................................................................18
Teletext Language ...............................................................................................18
Display Format.....................................................................................................18
Video Resolution .................................................................................................18
Running Interactive Applications ....................................................................................19
Locked Channels and Programs..................................................................................... 20

5
1110TH Island
Main Menu ...........................................................................................................................21
Main Menu Structure...........................................................................................21
Short overview of the basic functions of the Main Menu submenus.................... 22
Viewer Planner ............................................................................................................. 22
Setting a Timer....................................................................................................24
Setting a Reminder..............................................................................................24
Channel Manager ......................................................................................................... 26
Add Channels..................................................................................................... 26
Delete Channels ................................................................................................. 27
Move Channels................................................................................................... 27
Skip Channels..................................................................................................... 28
Hide Channels .................................................................................................... 29
Restore Channels................................................................................................ 29
Rename Channels............................................................................................... 30
Lock Channels .....................................................................................................31
List Organization........................................................................................................... 32
For Parents ................................................................................................................... 33
Receiver Lock...................................................................................................... 33
Parental Level ..................................................................................................... 34
Change PIN Code ............................................................................................... 34
Your Preferences........................................................................................................... 35
Display Options .................................................................................................. 35
Language Options .............................................................................................. 36
Pay Per View................................................................................................................. 37
Installation.................................................................................................................... 37
Settings.............................................................................................................. 37
TV Settings......................................................................................................... 38
System Settings .................................................................................................. 38
EPG Settings....................................................................................................... 39
Modem Settings................................................................................................. 39
Modem Diagnostics............................................................................................ 39
Signal Meter....................................................................................................... 39
Channel Search .................................................................................................. 40
Receiver Status ................................................................................................... 40
Factory Reset...................................................................................................... 40
Help ..............................................................................................................................41
Electronic Program Guide....................................................................................................... 42
Before Requesting Service...................................................................................................... 43
Technical Specification ........................................................................................................... 45

6
1110TH Island
Introduction
About This Manual
This User Manual describes the overall functionality of your decoder (set-top box). You will find
here the information you need to operate your decoder and take advantage of all its features.
First, make sure that your decoder is properly connected. Then, pick up your remote control and
follow the hints of this manual. Once you have learned how to operate the remote control and
familiarized yourself with the main features of your decoder, you will need this manual only for
occasional consultation.
Terminology in the Manual
In order to avoid misunderstanding, please bear in mind what is meant by the following terms:
a menu – refers to a window/screen which contains items available for selection,
Main Menu – refers just to the window (menu) and its content (including submenus), which is
displayed after pressing the button,
submenu – describes any menu that is opened from another one,
window, screen – used interchangeably.
About Your Decoder (Set-Top Box)
Your decoder will allow you to do the following:
prevent your children from viewing unsuitable programs,
display additional information about a selected program,
use interactive applications,
create lists of your favorite channels,
set a reminder,
and much more.
•
•
•
•
•
•
Please note that your decoder’s software is being improved all the time and
therefore, from time to time, software on your decoder may be updated. If you
do not change the default settings of the decoder, the upgrade process will be
carried out automatically. After the upgrade process is completed, you can learn
about new features from the What is New? submenu (Main Menu – Help).
Please note that if you want to have the most up-to-date software version
and updated channel lists on your decoder, it is advisable that you switch the
decoder to standby mode when you are not using it.
Downloading a new software version may change the previous functionality of
the decoder and at the same time some information provided in this manual
may become outdated.

7
1110TH Island
Decoder* Remote
Control
Power Brick RF
Coaxial
Cable
Telephone
Cable
Batteries
Your Decoder
Unpacking Your Digital Decoder
As you unpack your digital decoder, please make sure that the following accessories are included:
If any parts are missing, please contact your vendor.
Overall Look
LED Indicator:
Green – operating mode
Red – in standby, low power consumption
The LED indicator blinks when your de-
coder is receiving signals from the remote
control.
Smart Card Slot: Smart Card allows you
to view scrambled channels. Gently push
the card into the slot. Its chip should face
downwards and the symbol of an arrow
should face inwards.
Two Nagra Smart Cards (e.g. Mediaset
and Pangea) cannot be used at the same
time.
If you are using two Cards, it does not
matter to which slot you place a Card
first. If you are using just one Card, it also
does not matter which slot you use.
* Please note that the look of your decoder’s casing may differ from the one in the picture.
Please note that the look of your decoder’s casing may differ from the one in the picture.

8
1110TH Island
Back Panel
RJ-11 input (V.90 Modem port)1. 2xRCA (audio stereo)5.
DC Input from external power supply2. S/PDIF output6.
Antenna In3. HDMI™ output7.
Antenna Out for analogue TV
programs – RF signal (loop-through)
4. TV SCART output8.
Connectivity Diagram
In order to be able to watch TV channels and listen to Radio channels, you need to connect your
decoder to:
a TV set
the mains (power source)
an antenna
•
•
•
123 4 58
67
TV
RF Signal
Loop-Through
Antenna Socket
Telephone
Socket Power Socket
Hi-Fi Home Cinema
Please note that the look of your decoder’s back panel may differ from the one in the picture.
Please note that the look of your decoder’s back panel may differ from the one in the picture.

9
1110TH Island
Connecting the decoder to your TV
You can connect your decoder to the TV via an HDMI or SCART cable.
Connecting the decoder to your VCR
You can connect your decoder to the VCR via an HDMI or SCART cable.
Connecting the decoder to your Home Cinema System
If you want to enjoy the surround sound broadcast, connect the decoder and your Home Cinema
system via an S/PDIF cable and change the Dolby Digital option (Main Menu – Installation
– Settings – System Settings) to Yes.
Smart Card
Smart Card allows you to view scrambled channels. Gently push the card into the slot. The chip
should face downwards and the arrow symbol should face inwards.
Without a Smart Card, you can view free-to-air channels.
If you have more questions about the card functioning, contact your service provider.
Looking After Your Smart Card
The card is fragile, so bear in mind the following precautions:
Do not bend or twist the card
Do not expose the card to heat or direct sunlight
After inserting the card, leave it in the slot permanently
Clean only with a soft dry cloth
•
•
•
•

10
1110TH Island
Remote Control
Button Action
Switches the decoder between standby and operating modes (turns the decoder on and off).
Allow you to tune to a desired channel, select menu items and enter the PIN code (the default PIN
code is 1234).
Mutes the sound. Pressing this button once again restores the previously set volume level.
Displays the Options menu where you can change audio, subtitle and teletext language as well as
display format and video resolution. You can change an option only if its alternatives are broadcast
with a particular program.
Adjust the volume.
Tune to the next/previous channel. In some menus, they scroll pages up and down.
Displays and hides the Main Menu where you can change different settings of your decoder.
Displays and hides the window with the currently selected channel list. In this window, you can
change channel lists and tune to a desired channel.
This button is inactive.
Displays the Electronic Program Guide.
Switches between the Channel Banner, Channel Banner with Extended Information and
viewing mode in a circular manner.
In the Channel Banner, they browse through channels. In different menus, they shift highlight.
When up/down shifting is possible, there are icons displayed.
In the Channel Banner, they switch between the current and next program information. In different
screens, they highlight items or change values. When left/right shifting is possible, there are the
icons displayed.
In the Channel Banner, if the icon is displayed, it tunes to the channel which name is
displayed or sets a Reminder when the information about the next program is displayed. In different
menus and screens, it selects the currently highlighted item or confirms your choices.
In viewing mode, it alternates between the current and previous channel within the same Channel
List. In different screens, it returns to the previous screen.
Returns to normal viewing.
Navigate through external applications. They are also used to perform a few additional functions in
some screens.

11
1110TH Island
Displays and hides the Applications window.
TEXT
Used by some external applications.
Switches your decoder between the TV and Radio modes.
Displays the Options menu, which allows to change the Video Resolution.

12
1110TH Island
How to Set up Your Decoder
The process described below takes place when the decoder is turned on for the first time and
when the factory settings are being restored.
Welcome Screen
Once you have connected your decoder to the TV and
any other equipment, plug them all to the mains and
turn them on. After several seconds you will see the
Welcome Screen on your TV screen. Afterwards, the
subsequent screens, which are described below, will
appear.
Please note that in the following screens you will have
10 seconds to make a selection. If you don’t press
by that time, the decoder will automatically select the
highlighted item and will move to the next screen.
Select Language
The Select Language screen allows you to select the
language in which all the menus and messages will be
displayed on the TV screen. In the Select Language
window, press / to highlight the on-
screen language, and then press to make a selec-
tion. Once you have selected the language, the Confir-
mation screen will appear. Press to confirm your
choice of the on-screen language or press to return
to the Select Language screen.
The language selected in this window is also automati-
cally assigned as the language of Primary Audio, Primary
Subtitles and Teletext Language. Please note that you
can also change the on-screen language in the Language Options screen (Main Menu – Your
Preferences).
Channel Numbering Method
In the Select Channel Numbering Method screen, you
can choose the way channels will be numbered.
If you choose Automatic Channel Numbering, the
channels will be organized as the broadcaster ordered
them (usually thematically).
If you choose Normal Channel Numbering, the
channels will be numbered in the order they are found
during the Channel Search process.
Select Language
Channel Numbering Method
Welcome Screen

13
1110TH Island
Channel Search
After you have selected a numbering method and pressed
, the channel search will start automatically. When
this procedure is completed, you will be informed about
the total number of channels found. Then, press the
button to tune to the first TV channel.
If the channel searching procedure has not been
completed successfully, a suitable error message will
appear. You can then either press the button to go
back to the Select Language screen or enter the Main
Menu by pressing the button. In the Main Menu
you will be able to access the Installation and Help
submenus.
To adjust the picture quality, you may need to change resolution and the TV Screen Format
settings.
TV Screen Format
When you are setting up a new decoder for the first time,
by default, the deocder sets TV Screen Format to 4:3.
It means that if the screen format of your TV is 4:3, there
is no need to modify TV Screen Format setting in the
decoder’s menu.
However, if the screen format of your TV is 16:9, using
“Point and Select” rule (see page 14), go to the Main
Menu, Installation, Settings, TV Settings and change
the TV Screen Format option to 16:9.
Resolution Change
The resolution settings applies to HDMI connection only.
They will have no effect on SCART output.
Since the terrestrial TV channels received in Italy are
Standard Definition (SD) channels and not High Defini-
tion (HD) channels, your i-CAN 1110TH has been preset
in factory to display a video resolution called 576i that
is best adapted. However, some TV sets do not support
this resolution using HDMI connection. If this is the case
of your TV set, it will display a black screen when you
connect it via HDMI to the i-CAN 1110TH. If this happens,
connect your decoder to the TV using a SCART cable
and change the Video Resolution option (Main Menu
– Installation – Settings – TV Settings) to 1080i. Then,
connect the decoder to the TV via the HDMI cable again.
Channel Search
Resolution Change
TV Screen Format Change

14
1110TH Island
Using Your Decoder
Turning Your Decoder On / Off
First, switch on the TV set and any other connected equipment. Then, switch on your decoder by
pressing the or , or buttons on the remote control. When the decoder comes
out of standby, the LED indicator on the front panel illuminates green and the receiver tunes to the
last viewed channel.
When you are not using your decoder, put it in standby mode by pressing the button. When
the decoder is in standby mode, the LED indicator on the front panel illuminates red.
Basic Rule “Point & Select”
To use your decoder successfully, you need to know and “master” the “Point
and Select” rule. You will use this rule every time you go to the menus and
submenus of the decoder.
You “point” by pressing the arrow buttons on the remote control, which
moves the “on-screen” highlight to different items. Once you have pointed
to an item (highlighted an item) on the screen, select it by pressing the
button on the remote control.
You can also press the button to go to the previous screen or to close all the windows
(screens) and return to normal viewing.
Selecting Channels
You can tune to the desired channel in a few ways:
Press to tune to the next channel and press
to tune to the previous channel.
Enter the number of the desired channel using the
keys. When you press a number button, the
Channel number entry box appears in the upper
right corner of the screen.
Press the button, highlight the desired channel
and press to tune to this channel.
Press the button in order to display the Channel Banner. Then, browse through channels
using the / buttons. Press to tune to the channel which name is displayed
in the Channel Banner.
1.
2.
3.
4.
Channel Number Entry Box

15
1110TH Island
Browsing through Channels and Programs in the Channel Banner
When you tune to a channel or press , the informa-
tion displayed within the Channel Banner concerns the
channel to which the decoder is currently tuned and the
program presently broadcast.
Pressing / makes the decoder enter
the browsing mode. It means that the decoder stays
tuned to the same channel but the information displayed
within the Channel Banner concerns other channels.
When you press , the Channel Banner displays
information concerning the next channel and when you
press , the Channel Banner displays information
concerning the previous channel.
When the information displayed within the Channel
Banner concerns the current channel, the name of the
channel is white. When the decoder is in the browsing
mode, the name of the channel is dark grey and the
icon appears in the Channel Banner.
When the Channel Banner displays the information
about the current channel or is in the browsing mode,
pressing either or displays the information about
the next program. Pressing or once gain displays
the information about the current program.
Channel Banner in Browsing Mode
Next Program Information
Channel Banner
The Channel Banner appears at the
bottom of the TV screen when you
tune to a new channel or when you
press the button.
The Channel Banner provides you
with basic information about particular
channels and programs. The Channel
Banner disappears automatically after
a few seconds or when you press .
In the picture on the left you can see
items (information) appearing within
the Channel Banner.
Icons
Channel NameChannel Number
Program Name End TimeStart Time
Current Time and Date
Channel Number
Channel Banner

16
1110TH Island
Channel Banner Icons
Icon Meaning
The current program is broadcast with more than one soundtrack. Press to display the Options
menu where you can change the audio track.
The channel is locked. To watch this channel, enter the PIN code.
Extended information about a particular program is available. Press twice to display this
information.
If you are browsing through channels (using / buttons), pressing tunes to
the channel to which the Channel Banner refers.
If you have displayed information concerning the next program (by pressing / ), pressing
sets a Reminder.
The program is broadcast with the surround sound at the moment or there is an audio track with
the surround sound available. To choose the audio with the surround sound, press to display
the Options menu where you can change the soundtrack.
Please note that to be able to enjoy the surround sound, you need suitable equipment and Dolby
Digital in System Settings (Main Menu - Installation - Settings) set to Yes.
Recording Reminder has been set for a particular program.
Viewing Reminder has been set for a particular program.
The program is locked according to the parental settings defined in the For Parents submenu under
the Main Menu.
External applications are available on a particular channel. To get access to the list of the applications,
press the button on the remote control. Use the color buttons to navigate the applications.
If the Application AutoSTART (Main Menu – Your Preferences – Display Options) is set to Yes,
external applications are launched automatically.
Teletext is broadcast on the currently tuned channel.
Subtitles are available for the current program. Press to display the Options menu where you
can choose the subtitle language.
This channel is scrambled and you need an appropriate Smart Card to watch this channel.
There are some unread messages in your Message Box.

17
1110TH Island
Extended Information About Programs
The icon displayed in the Channel Banner informs
that there is additional information about the program
available.
Press the button to display the Channel Banner
and press it again to display the Extended Information
window. If the information exceeds one page, press the
button for the third time to display the next page. To
close the Extended Information window, press the
button again or .
The Extended Information window may concern the
current program as well as other programs. To display
information about other programs, make the decoder
enter the browsing mode by pressing /
buttons.
Channel List
When you set up your decoder for the first time or when
the factory settings are being restored, the decoder
searches for channels. When the procedure of channel
search is completed, all the channels found are gathered
in the All TV and All Radio lists. You can, however,
create additional six TV and six Radio lists where you can
group channels you watch most often.
In order to access the lists of channels (either All TV/Radio
or your favorite ones), press the button on the
remote control. Use the button to switch between
Radio and TV lists. If you have defined your favorite lists,
you can access them by pressing the / buttons.
When you have displayed the desired channel list, select
a channel by pressing the / or the
buttons. You can also press to page the list
up and down.
When you browse through channels, the icon
appears in the Channel Banner but the decoder remains
tuned to the same channel.
When you have highlighted the desired channel, press to tune to this channel.
Press or to leave the Channel List screen and return to the normal viewing mode
without channel change.
Channel List
The way of creating and
editing your favorite lists is
described in the Channel
Manager and List
Organization sections.
Extended Information

18
1110TH Island
Options Menu
Press the button to open the Options menu. This
menu allows you to change the Audio Language, Subti-
tle Language, Teletext Language, Display Format
and Video Resolution. These options can be changed,
if they are available for a particular program. Your new
settings of the Audio and Subtitle Language as well
as the Display Format take effect immediately and
they are remembered until the program ends. When the
program ends, the settings revert to their default values.
The Teletext Language setting applies to the current
channel (not program) and is remembered as long as
the decoder is tuned to the current channel. The Video
Resolution setting is remembered till the next resolution
change.
In the Options window, use / buttons to highlight the available options and
/ to change them. Press to confirm your choice or to leave the Options menu
without making any changes.
Audio Language
If available, you can select any of the audio soundtracks being broadcast. If any languages with the
surround sound are available for the current program, they are marked by the symbol.
Please note that to be able to enjoy the surround sound, you need suitable equipment and Dolby
Digital in System Settings (Main Menu - Installation - Settings - System Settings) set to Yes.
Subtitle Language
If available, you can select among different subtitle languages. If you select Off, no subtitles are
displayed.
Teletext Language
If available, you can select among different teletext languages.
Display Format
This option is possible to be changed if your TV screen format is different than the format of the
program being currently broadcast. For example, if you have a TV set with the 4:3 screen format,
and a program is broadcast in the 16:9 format (or the other way round), you can adjust the display
format. You can choose between the Letter-box, Pan-Scan and Full Screen display format.
Video Resolution
This option allows you to change the resolution. For more information see page 13.
Options Menu

19
1110TH Island
Running Interactive Applications
Your receiver gives you access to interactive applications.
They may be broadcast on digital channels in addition to
video and audio. When there are external applications
available on a channel, the icon is displayed in the
Channel Banner.
The Application AutoSTART setting (Main Menu - Your
Preferences - Display Options) affects the way exter-
nal applications are launched. By default, Application
AutoSTART is set to Yes. It means that on tuning to a
channel with external applications, they are launched
automatically. However, it may happen that, regardless
of the ‘autostart’ setting, some applications will not start
automatically (if the broadcaster do not want them to).
If this is the case, press to open the Applications
window and select the desired application.
If you do not want external applications to run automati-
cally, set Application AutoSTART (Main Menu - Your
Preferences - Display Options) to No.
In order to access the Applications window with a list of
the available applications, press the button on your
remote control. Select an application using the /
buttons and confirm your selection by pressing the
button.
If your decoder is currently running an application, it is impossible to display the Applications
window by pressing . To display the Applications window you have to first leave the running
application and then press . Leaving applications is performed according to rules characteristic
of particular applications.
Remote control buttons and their actions with reference to external applications
Button Action
Application
AutoSTART is
set to
Is an application
currently running?
Opens / closes the Applications window. No No
Opens / closes the Applications window. Yes No
Inactive. No Yes
Inactive. Yes Yes
Displays the Main Menu and at the same time
exits a running application. No/Yes Yes
Leaves the Main Menu and does not restart
the previously closed application. No
Leaves the Main Menu and restarts the
previously closed application. Yes
Channel change does not
always exit the currently
running application.
You can run one application
at a time.
Applications Window

20
1110TH Island
Locked Channels and Programs
Your decoder allows you to lock channels and/or
programs that you, for example, find inappropriate for
your children. ‘Locking’ is carried out in two ways:
- locking whole channels (in Channel Manager)
- setting the age limit according to which programs will
be blocked (in For Parents)
Once you have set a blockade, you will have to enter
the PIN code every time you attempt to watch a locked
channel. To enter the PIN code, use the number buttons.
If you do not want to unlock the channel, press to
tune to the previous channel or press to tune to
another channel.
Locked channels are marked by the icon and locked programs are marked by the icon
in the Channel Banner.
When you enter the correct PIN code, the locked channel remains unlocked as long as you are
tuned to this channel. If you tune to another channel the unlocked channel becomes locked again
and you will be asked to enter the PIN code every time you try to tune to a locked channel.
The default PIN code is 1234, but you can easily change it by means of the Change PIN Code
screen (Main Menu – For Parents).
Locked Channel