I.SOUND 4X User manual

4X Portable Speaker System
HOW TO SET UP THE I.SOUND 4X PORTABLE SPEAKER SYSTEM:
1. Open the battery compartment located on the back of the speaker.
2. Insert 6 “AA” batteries.
NOTE: You may also power the i.Sound 4X Portable Speaker System using the
included AC adapter.
3. Attach the cradle to the front of the speakers. It will snap into the 2 holes on the front
of the speakers.
4. Move the power switch located on the top of the speaker to the “ON” position. The
LED will confirm the speaker is powered on.
5. Locate the 3.5 mm cable on the bottom of the casing, unwind it and plug it into your
audio device.
NOTE: Always power the speaker “OFF” when not in use.
PACKAGE CONTENTS:
• i.Sound 4X Portable Speaker System
• Cradle
• AC Adapter