I-Tech CCH1700-SIP-TR User manual

User Manual
MODEL: CCH1700-SIP-TR
Product Specification
Important safety instructions
01. Please read these instructions carefully before using the product and save for later reference.
02. Follow all warnings and instructions marked on the product.
03. Unplug this product from the wall outlet or your power source before cleaning. Clean the product
with a damp soft cloth. Do not use liquid or aerosol cleaners as it may cause permanent damage
to the screen.
04. Do not place this product on an unstable cart, stand, or table.
The product may fall, causing serious damage to the product.
05.Do not operate this product in sunlight directly.
06. This product should be operated from the type of power indicated on the marking label.
If you are not sure of the type of power available, consult your dealer or local power company.
07. This is a safety feature. If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet.
Do not defeat the purpose of the grounding-type plug.
08.Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
Never spill liquid of any kind on the product.
09. Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltage points or other risks and will void the warranty.
10. Refer all servicing to qualified service personnel.
11. Unplug this product from the wall outlet or your power source and refer servicing to qualified
service personnel under.
the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product does not operate normally when the operating instructions are followed.
Adjust only those controls that are covered by the operating instructions since improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. If the product exhibits a distinct change in performance, indicating a need for service.
i-Tech Company LLC
EMAIL: [email protected] • WEB: www.iTechLCD.com Modified Date: 11-17-2023

Front side
Rear side
I/O portion
Accessories

1. Instroduction
1.1 Features
High contrast color TFT-LCD Monitor support resolution up to 1280*1024.
Power input : DC 12V
1.2 Notice
Do not touch the LCD panel surface with sharp or hard objects.
Do not use abrasive cleaners, waxes or solvents for cleaning, use only a dry or damp, soft cloth.
Use only with a high quality, safety-approved power source ( DC 12V ).
1.3 Check List
a. LCD monitor x1
b. DC 12V with AC100-240V power adapter x1
c. VGA Waterproof connector Cable / L=6ft x1
d. DVI Waterproof connector Cable / L=6ft x1
e. HDMI Waterproof connector Cable / L=6ft x1
f. USB Waterproof connector Cable / L=6ft x1
If any items are missing or damaged, please contact your dealer immediately.
2. Installing the Monitor
The procedures for setting up your TFT LCD monitor are as followings:
2.1 Power & Signal connections
2.1.1 Power
DC 12V input
2.1.2 VGA cable ( or DVI cable or HDMI or USB ) connection
Plug 15-pin VGA signal cable ( or DVI cable ) to the VGA ( or DVI ) connector in the rear of PC system, and plug
the other end to the monitor. Secure cable connectors with screws.
USB cable is used for Touch operation.
2.2 Optional cable connections
The LCD monitor is designed to work with a variety of compatible video sources. Due to possible deviations
between these video sources, you may have to make adjustments to the monitor settings from the OSD menu
when switching between these sources.
These adjustments are made from the OSD menu.

3. Using VGA LCD Monitor
3.1 Key Definition
OSD KEY
Function
Auto
Auto Adjust
Menu
Menu Select
Power
Power ON / OFF
Increase
Up
Decrease
Down

3.2 Setup for Operation
OSD MENU
Description
Picture
Backlight
Adjust the Backlight of thescreen.
Brightness
Adjust the Brightness of the screen.
Contrast
Adjust the Contrast of the screen.
Sharpness
This function allows the user to optimize the sharpness of the
image.
Display
Auto Adjustment
HPosition
Adjust the horizontal position of the screen’s image.
VPosition
Adjust the vertical position of the screen’s image.
Pixel Clock
Adjust frequency to fill display.
Phase
Adjust the phase control of the image.
Color
Gamma
Set the Gamma to 2.0/2.2/2.4 and off.
Color Temp
Set the color to 6500k/9300k/User.
Hue
Adjust the Hue of the screen.
Saturation
Adjust the Saturation of the screen.
Auto color
Advance
Aspect Ratio
Set Aspect Ratio to 4:3/5:4/16:9/Full.
Overscan
Set Overscan to on/off.
Ultra Vivid
Set Ultra Vivid to L/M/H/Off.
Input
Auto Select
VGA
VGA Input.
HDMI
HDMI Input.
DVI
DVI Input.
Audio
Volume
Adjust the Volume.
Mute
Set the Mute on/off.
Auto Source
Set the Audio Source Analog/Digital.
Other
Reset
Menu Time
Adjust the Menu Time.
OSD HPosition
Adjust the horizntal position of the OSD Menu screen’s image.
OSD VPosition
Adjust the vertical position of the OSD Menu screen’s image.
Language
Set the Language English/繁體中文
Transparency
Adjust the OSDTransparency.

4. Cleaning the monitor
a. Make sure the monitor is turned off.
b. Never spray or pour any liquid directly onto the screen or case.
c. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
d. The display area is highly prone to be scratched. Do not use ketone-type material
(ex. Acetone), Ethyl alcohol, toluene, ethyl acid or Methyl chloride to clean the panel.
It may permanently damage the panel and void the warranty.
e. If it is still not clean enough, apply a small amount of non-ammonia, non-alcohol based
glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
f.Cleaning Touch Screen: please use dry cloth or soft cloth with neutral detergent
(after wring dry) or one with ethanol at cleaning.
Do not use any organic solvent, acid or alkali solution.
5. Disclaimer
We do not recommend using any ammonia or alcohol-based cleaners on the monitor screen
or case. Some chemical cleaners have been reported to damage the screen and/or case of the
monitor.