I-Tech RKP1015-1601 User manual

User
Manual
RKP1015 /1017 801/1601
1U15”/17”LCDKeyboardDrawer
withPS/2KVM

RKP1015/ RKP1017-801/1601
Rev. : 1.0
P.1
1.TableofContent P.1
2.Introduction P.2
3.Features P.2
4.PackageContents P.3
5. Optional Accessories P.4
6.PeripheralProducts P.4
7.ImportantSafeguards P.5
8.StructureDiagram P.6
9.DimensionDiagram
RKP1015-8/1601P.7
RKP1017-8/1601P.8
10.LCD Session
LCD MembraneDiagramP.10
LCD OSDControl
MainMenu P.10
Sub Menu P.11-12
ResolutionSettings
ForWindows P.13
ForSUN Servers P.14
11.KVMSession
Front ViewP.16
RearViewP.17
Installation StepsP.18
Cascading P.19
12.StartUp P.20
HotKeyCommand P.20
HotKeyCommand Operation P.21-22
KVMOnScreenDisplayControl
OSDStructureDiagram P.23
OSDMenu Operation P.24
13.FAQ P.25
14.TechnicalSpecification P.26-27
1.TableOfContent

Rev. : 1.0
P.2
RKP Seriesisacombination ofkeyboard,mouseand monitorintoadrawer,
withfeaturessuchasflip-updesign, adjustablebrackets,builtinLCD OSDto
provide effectiveassistant foran administratortocontrolPCsystem.
RKP Seriesprovidescosteffectiveforyourlimited ITbudgetoverusingCRT
and rack mounting. Also, it willbe spacesavingforyourcompact environment
rack and effectiveassistant foran administratortocontrolPCsystem.
2.Introduction
3.Features
Adjustablemounting bracketsfrom390 to790mm (front torear19
mount)
Lightweight aluminiumconstruction—withblackanodisefinish
SlimSizekeyboardwithGlidePoint
TM touchpad mouse
StandardD-Sub15-pinVGAinput connector
Suppliedwith12V5Aremotepoweradapter(singlepowerresource)
BuiltinOnScreen Displaycontrolledbyintegralmembrane switches.
1UHeight,separatesliding screenand keyboardusing unique miniature
Cyberslides
Uniquemonitorflip-up design allowsviewing through closed glass door
of cabinet.
Built-inKVMswitchfunction foreasy controllingand monitoring up to16
residing servers/ platforms
SupporteightcharacterspasswordprotectionandsearchPCserver
name
Autoscan mode formonitoring PCsand flexiblescantimefrom5~99
seconds
HotPluggable—Addorremovecomputerswithoutpoweringdownthe
switch
EasilyswitchindividualbuttontoselectthePCchannelusing the push-
buttonchannelselectorswitches,Hotkeys,orviatheOn-Screen
Disclaimer
Thisinformation issubjecttochange withoutnotice.Theproducerofthismanual acceptsno
responsibilityfordamage orclaims,resulting frommisuseormisinterpretation.
RKP1015/ RKP1017-801/1601

Rev. : 1.0
P.3
4.PackageContents
Before Unpacking
It isvery importanttolocatetheLCD KeyboardDrawerinasuitableenvironment.
The surfaceforplacingand fixing the LCDKeyboardDrawershouldbe stableandlevel
ormounted intoasuitablecabinet.
Makesurethe placehasgood ventilation,isout ofdirect sunlight, awayfromsourcesof
excessivedust, dirt,heat, water,moistureand vibration.
Convenienceforconnecting the LCD KeyboardDrawertothe related facilitiesshouldbe
well considerstoo.
Unpacking
The LCD KeyboardDrawercomeswiththe standardpartsshownasabove. Checkand make
suretheyareincluded and ingood condition.Ifanything ismissing,ordamage,contactthe
supplierimmediately.
LCDMonitorDrawerwithPS/2KVMSwitch1Piece
UserManual1Piece
DCPowerAdapter1Piece
PowerCord1Piece
Mounting Bracket1Pair
Fasteners4Pieces
CD-63-in-1KVMcable8Pieces
RKP1015/ RKP1017-801/1601

Rev. : 1.0
P.4
RKP1015/ RKP1017-801/1601
5.OptionalAccessories
6.PeripheralProducts
CD-6/10 / 156ft/ 10ft/ 15ftPS/23-in-1cable
CA-2/6/ 10 /152ft/ 6ft/ 10ft/15ftPS/23-to-3cable
SUN-31SUN /iMACUSBtoPS/2adapter
Others Video Input
12V/24V/ 48VDC Power
KVMCable
CascadeCable
Conversion Adapter
ModelDescription
CV-401 /CV-801 /CV-16014-Port/8-port/16-PortPS/2KVMswitch
CV-160216-Port2-ConsolePS/2KVMswitch
CV-S801 /CV-S16018-Port/16-portUSBKVMswitch
CV-S160216-port2-ConsoleUSBKVMswitch
CV-101CAT.5PS/2KVMextender

Rev. : 1.0
P.5
Pleaseread allof theseinstructionscarefullybeforeyou usethe device.
Savethismanualforfuturereference.
UnplugtheLCD KeyboardDrawerfromthepoweroutletbeforecleaning.
Donotsprayliquidcleanersoraerosoldirectlyonthe device. Wetaclothwitha
neutraldetergent(e.g.cleanwater) andsqueezeittight,thencleanthescreen
slightlywithit.
DonotexposetheLCDKeyboardDrawerdirectlytorain,water,moistureor
sunlight.
Avoidpressureonthe LCD screentopreventpermanentdamagetothedisplay.
Donotattempttoservicethe deviceyourself. Improperoperationmayvoidyour
warranty. Referall servicingtoqualifiedservicepersonnel.
Safestorageenvironment oftheLCD KeyboardDrawerisrangingbetween –20oC
and60oC.Permanent damagecouldoccuriftheLCD KeyboardDrawerisstored
outside thesaferange.
UnplugtheLCD KeyboardDrawerimmediatelyand call qualified serviceperson-
nelunderthefollowingconditions:
1. Ifthe monitorhasbeenexposedtorain,liquidorwater.
2. Ifthe monitorhasbeendroppedorthecasinghasbeendamaged.
Whatthewarrantydoes notcover
1.Anyproduct,onwhichtheserialnumberhasbeendefaced,modifiedor
removed.
2.Damage,deteriorationormalfunction resulting from:
a)Accident,misuse,neglect,fire,water,lightning,orotheractsofnature,
unauthorized productmodification,orfailuretofollowinstructionssupplied
withthe product.
b)Repairorattemptedrepairbyanyonenotauthorized byus.
c)Anydamageof theproductduetoshipment.
d)Removalorinstallationof the product.
e)Causesexternaltotheproduct, suchaselectricpowerfluctuation orfailure.
f)Useof suppliesorpartsnot meetingourspecifications.
g)Normalwearand tear.
h)Anyothercauseswhichdoesnotrelatetoaproduct defect.
3. Removal, installation, andset-upservicecharges.
7.Important Safeguards
RKP1015/ RKP1017-801/1601

Rev. : 1.0
P.6
8.StructureDiagram
1.PS/2keyboard
2.Aluminiumfrontpanel
3.Class AactivematrixTFT LCD panel
4.Rearmetalcase
5.Analogtodigitalsignalconverter board
6.LCD inverter
7.LCD membrane
8.Ball bearing telescopicslides
9.Adjustablemountingbracket
10.KVMmembrane&KVMswitchboard
RKP1015/ RKP1017-801/1601
•‚ƒ„…
Š ‡ˆ
†
‰
Š

Rev. : 1.0
P.7
RKP1015-8/1601 1U15 LCD KeyboardDrawer withPS/2KVM
9.Dimension Diagram
RKP1015/ RKP1017-801/1601
15 LCD

RKP1017-8/1601 1U15 LCD KeyboardDrawer withPS/2KVM
9.Dimension Diagram
RKP1015/ RKP1017-801/1601
Rev. : 1.0
P.8
17 LCD

Rev. : 1.0
P.9
LCD
Session
RKP1015/ RKP1017-801/1601

Rev. : 1.0
P.10
LCD MembraneDiagram
Left Right Exit
Menu/SelectionPower
MAINMENU
BRIGHT/CONTRAST
AUTOADJUST
PHASE/CLOCK
H/VPOSITION
MISC
RESET
MainMenu
Bright/ Contrast
Toenterintothe Bright, Blacklevel&Contrast sub-menu
AutoAdjust
Toperformautomaticoptimisationsof allfunctions
An “Adjusting message isdisplayed duringthe process
Phase / Clock
Toenterintothe phase&clock sub menu
H/VPosition
Toenterintothe Position sub-menu
MISC
Toenterintothe MISCsub-menu
Reset
Reset tothedefaultfactorysettings
10.LCD Session
RKP1015/ RKP1017-801/1601

Rev. : 1.0
P.11
Bright/ Contrast
1.Brightness
Toperformbrightness adjustment of the inputRGBsignal
UsetheLeft&Rightbuttontoadjust andbuttonto “Brightness
2.Contrast
Toadjust the contrastlevelof theinput signal
Usethe Left&Right button toadjust and button to “Contrast
Phase/ Clock
1. Phase
Toadjust input videosampling clock’sphase
Usethe Left&Right button toadjust and button to “Phase
2. Clock
Toadjust input videosampling clock
Usethe Left&Right button toadjust and button to “Clock
H/VPosition
1. H.Position
Toadjust the horizontalsizeof theframe
Usethe Left &Right button toadjustand buttonto “H.position .
2.V.Position
Toadjust the verticalpositionof theframe
Usethe Left&Right button toadjust and button to “V.position .
10.LCD Session
RKP1015/ RKP1017-801/1601

Rev. : 1.0
P.12
MISC
1.Information
The firstheaderrowshowsthe current resolution setup
The second headerrowshowsthe horizontalfrequency ofthecurrent
input signal
The thirdheaderrowshowsthe verticalfrequency ofthecurrentinput
signal
2.OSDTimer
Tomodifythe durationof theOSDtime-out
3.Color
a) 5500K
Select ColourTempat 5500K
b)6500K
Select ColourTempat 6500K
c) 9500K
Select ColourTempat 9500K
d)User
Change ColourTempbymanual
4.Language
Toselectthelanguageof OSDmenu 7Languages:
(1)English
(2)Japanese(日本語)
(3)Chinese(中文)
(4)German
(5)Francais
(6)Espanol
(7)Italiano
10.LCD Session
RKP1015/ RKP1017-801/1601

Rev. : 1.0
P.13
ResolutionSettings
ForMicrosoftWindows
Step1 –Pressrightclickon the desktop
Step2 –Choose “Properties
Step3 –Change the “Screen Resolution
Step4 –Change the “Screen refreshrate
10.LCD Session
RKP1015/ RKP1017-801/1601

Rev. : 1.0
P.14
10.LCD Session
ResolutionSettings
ForSUN Servers
ResolutionconfigurationproceduresshouldberunbyqualifiedSUN
serveradministrator
Sun Serversareusing resolution at 1152 x900x76Hz.
Supported resolutionmode for15 LCD:
1024 x768 x70/75Hz
Supported resolutionmode for17 LCD:
1280 x1024 x75Hz
You needtochange the SunServerresolution beforeyouconnectto
LCD Display.
Pleasedothe following procedurestochangethe resolution settings:
1.Asroot:
You mayfind the followingcomment “/user/sbin/m64config .
2.Toviewcurrentresolution:
Type “/user/sbin/m64config –prconf .
3. Tochange to1024x768 @70MHz:
Type “/user/sbin/m64config –res1024x768x70 now .
4.The screen willbe rubbish.
5. Then type “pkillXsun .
And Type “pkillXsession torestart theXsession.
UnderCommon Desktop Environment (CDE).
TochangetheOpenBootresolution,youcantypethefollowing
command inOKprompt.
1.InOKprompt, type “setenvoutput-devicescreen:r1024x768x70 .
2.Type “printenv toconfirmthe resolutionhasbeen changed
to1024x768x70Hz.
3. Then type, “reset torestartthe system.
Note:RemembertoRESTARTthe serveraftertheseprocesses.
Note: RemembertoRESTARTthe serveraftertheseprocesses
RKP1015/ RKP1017-801/1601

Rev. : 1.0
P.15
KVM
Session
RKP1015/ RKP1017-801/1601

Rev. : 1.0
P.16
11.KVMSession
FrontView
ChannelSelect Button
Selected Channel BankButton
BankNo.
Shift ButtonOnlineChannel
LEDIndication
Selected Channel-Displayedchannelonmonitor &redin
LED.
Channelselect button-Press toselect channelfrom1 –8.
Shiftbutton-Press &Holdfollowwithachannel
buttontoselect channelfrom9 –16.
OnlineChannel-GreenLEDstatethePChasconnected
andpoweron.
Bankno.-Displaythe Bankno. from1 –8.
Bankbutton -Select the bankfrom1 –8(for cascade
only).
RKP1015/ RKP1017-801/1601

Rev. : 1.0
P.17
Rear View
11.KVMSession
Cascade
Port Channel
Port
DC
Power
RKP101X-801
RKP101X-1601
DC Power-connect toexternal12VDC poweradapter.
CascadePort-
connecttoadditionalKVMswitchforchannel
expansion.
Channel Port -connect toPCcomputerwithCD-63-in-1KVMcable.
RKP1015/ RKP1017-801/1601

Rev. : 1.0
P.18
11.KVMSession
Installation Steps
Beforeinstallation,pleasemakesureall ofperipheralsandcomputershave
been turned off.
1.Connectthe3-in-1cablewith2mini-din6-pinconnectorsanda
HDDB15-pinconnectortothe computerports.
2.Connect anotherend ofthe cabletoKVMswitch.
3.Plug thepoweradapterincluded tothe LCD KeyboardDrawer.
4. Afterpoweringon computersandfinishing theboot-upprocess, you
can startLCD keyboarddrawerwithPS/2KVMswitch.
Note: Pleasedon’tswitchthe PCport(i.e.Don’tpressthe pushbutton of
KVMswitchorrunhotkey)duringthecomputersareunder
boot-up.
PC
CD-63-in-1cable
RKP1015/ RKP1017-801/1601
DC
Adapter

Rev. : 1.0
P.19
11.KVMSession
Cascading
Using CA-6PS/2KVMcabletoconnect fromBank1’s “Cascadeport to
Bank2’s “Consoleport . Afterconnectedpleasepress “Bank & “Channel
button onthe frontof the PS/2KVMswitchtoreset thePS/2KVMswitch.
CA-6PS/2KVMcable
CA-6PS/2KVMcable
Bank1
Bank2
Bank8
(Max.)
Cascadelevel Max. :8level
Max.PCconnectionis128 orwithadditional122 PCs.
AllPS/2KVMswitchiscompatible&can cascade witheachother.
Using CA-6PS/2KVMcabletocascade.
Normaldistancefromone PS/2KVMtoanotheris15 feet.
RKP1015/ RKP1017-801/1601