i3 International SW-570 User manual

i3-TRNG-SW570-QuickGuide.doc Rev. 121029
SW-570
User’s Manual
5 Port with 10/100/1000M
Switch with 4 PoE+ Ports
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device
and pursuant to Part 15 of FCC Rules.
These limits are designed to provide a
reasonable protection against harmful
interference when the equipment is
operated in a commercial environment. This
equipment generates and radiates radio
frequency energy. If equipment is not
installed and used in accordance with the
user manual, it may cause interference in
which case, users will be required to correct
interference at their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
SW-570 switch provides five (5)
10/100/1000M ports. SW-570 is designed
for easy installation and high performance:
ideal for the environment where the network
traffic and the number of users are
continuously increasing.
SW-570 switch features 4 PoE/PSE ports
and can be used to increase the number of
available network outlets. By using SW-570,
system designer will have an added flexibility
when selecting installation locations for their
network devices.
The compact desktop design is ideal for
small to medium workgroups. The SW-570
switch can be installed where space is
limited; moreover, it provides smooth
network migration and allows easy network
capacity upgrades.
Package Contents
Prior to installation, verify that your SW-570
package contains the following items:
•One PoE+ Gigabit Ethernet Switch
•One Power Adapter
•One Power Cord
•One Quick User Guide
Note: If any of these items are found missing or
damaged, please contact your local supplier for
a replacement.
Key Features
•5 Port 10/100/1000M Nway (Auto-negotiation)
Switch with 4 PSE/PoE ports
•4 Ports share a total 70W power. 30W max for
each of the four PSE/PoE ports.
•Palm size with metal chassis
•Auto-learn networking configurations
•Auto-detect full/half-duplex modes for any port
•Dedicated full-duplex 2000Mbps bandwidth
•Store-and-Forward switching methods
•IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
•Non-blocking & Non-head-of-line blocking full
wire speed forwarding
•Auto-MDI/MDI-X function for any port
•Smart plug & play
Front Panel (LEDs)
LED Indicators of SW-570:
5-port 10/100/1000M Switch with 4
PoE/PSE ports
LED Status Description
ON Power is on.
Power
OFF Power is off.
ON Port is used for
connection.
OFF No connection.
100M or
1000M
LINK/ACT
Flashing Transmitting/ Receiving
Data
ON Port is linked to PoE
Power Device
PoE
OFF No PoE Device is
connected
Rear Panel (Power)
Power is supplied by an external DC power
adapter.

i3-TRNG-SW570-QuickGuide.doc Rev. 121029
Technical Specifications
Standards
IEEE 802.3af
IEEE 802.3at
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3x Flow control
Features
Number of Ports: 5
10/100/1000BaseT(X) with 4
PoE/PSE Ports
MAC Address: 2K
Buffer Memory: 832K bits
Method: Store and Forward
Filtering/
Forwarding
Rates
1000Mbps port – 1,488,000pps
100Mbps port – 148,800pps
10Mbps – 14,880pps
Transmission
Media
10/100/1000BaseTX Cat5
UTP/STP
LED Indicators
Per Port:100M LINK/ACT,
1000M LINK/ACT, PoE
Per Unit: Power
Power Input DC 48V / 1.45A
Power Output 48V/DC
Power
Consumption 70 Watts (max.)
Dimensions
(H x W x D) 24mm × 130mm x 98mm
Weight 0.32 kg
Operating
Temperature 0ºC to 45ºC
Storage
Temperature -20ºC to 90ºC
Humidity 10 to 90% RH
(non-condensing)
Certifications FCC Class A, CE
Connecting PCs and Other devices to SW-570
SW-570 switch can be connected to PCs, Servers and other network devices via a straight through twisted pair cable.
Connecting Powered Devices to SW-570
Ensure that the Powered Device complies with IEEE 802.3af /at standard prior to connecting it to the SW-570 switch.
Use Cat5 twisted-pair cables to connect Powered Devices to ports 1~4 of the SW-570 switch.
SW-570 switch will supply 48V power to each Powered Device via a Cat5 twisted-pair cable.
Connecting Switch/Hub to SW-570
SW-570 switch provides automatic crossover detection functionality for any port. Up-linking to another switch can be done without a
crossover cable.