4
WARNING
•Use AC 100-240V, 50/60Hz only
•Cut off power supply before connecting/disconnecting any cable
•To avoid the risk of fall, damage and fire, do not fix the product to any unstable position.
•Do not place the product in any environment:
1. That is too damp, hot, cold or dusty or exposed to direct sunlight;
2. Where flammable or explosive substances are stored or used
3. Where there are combustible or corrosive gases like bathroom and kitchen
•Do not use any damaged or inappropriate power outlet. Keep a good contact between the power
plug and outlet.
•Protect the power plug and outlet against dust and metal attachments.
•Do not damage the power cord:
1. Do not remodel it;
2. Do not put heavy objects on it;
3. Keep it away from heat sources;
4. Do not pull it when disconnecting the power plug.
•To avoid the risk of short circuit, product damage and electric shock, do not insert any sharp
object, metal or liquid into or allow them to contact the ventilation holes or signal connectors.
•Paralleling multiple power plugs to one power outlet may cause fire due to excessive power
consumption.
•To avoid the risk of electric shock and fire, keep the product away from naked flames (like burning
candles).
•Do not put any container with water on the product, or the water drops or splashes could cause
electric shock or fire.
•It is normal that the machine appears screen mist in the process of operation, which is caused by
the ambient humidity and temperature. The temperature difference between the outside glass
and inside glass produce the screen mist which will disappear automatically for a period of time
(standard within 24 hours). Please feel free to use it.
•The ventilation holes in the housing are designed to protect the inside components against
overheat and ensure their long-term reliable work. The product should be placed without blocking
such ventilation holes.
To avoid the risk of electric shock, do not touch the power plug with wet hands.
In case of rainstorm or lightning, disconnect the power plug and antenna plug immediately to
protect the product against lightning stroke.
To avoid the risk of electric shock and fire, do not disassemble the product in any way. All
repairs should be referred to professional technicians.
