i3-TECHNOLOGIES i3TOUCH V6510 T10 User manual

MANUAL
i3TOUCH V6510 T10

Contents
Features 1
Safety Warning and Precautions 1
Installation and Connection 3
PackingList 3
Ports 4
Connection Diagram 5
Control Buttons on the Front Panel 6
Remote Control 6
Basic Operations 8
Power On/Standby 8
Source Selection 8
Menu Operations 8
List of Menu Settings 9
Intelligent Platform Operations 10
Basic Operations 10
Quick Start 11
Intelligent Application 11
Settings 14
Important Statement about Web Service 16
Troubleshooting 16
Technical Specications 18
Toxic/Hazardous Substances/Elements intheProduct 21

Features
1. Runs on Android 5.0.1 operating system with unique UI design, oering you more convenient operations and
better visual experience.
2. Download a huge selection of applications ranging from chat, query, learning, shopping to reading over the
Internet; support synchronous e-mail receiving and sending.
3. Support convenient operation through a mouse and keyboard with USB port, just like a computer.
4.Built-in Wi-Fi module, large-capacity memory and large-capacity buer, running 1080P HD movies and
massive games smoothly.
5. High-quality LCD screen featured by icker free, low radiation, high brightness, high contrast, large view angle
and short response time, greatly reducing the ghosting of fast moving images and eye fatigue.
6. De-interlaced image processing and industry-leading motion compensation technology, improving the
jagged and blurred edges of moving images thoroughly.
7. Dynamic contrast technology, signicantly improving image denition and contrast.
8. Multiple USB ports, supporting HD streaming media function.
9. Ultra thin body and ultra-narrow edges.
Safety Warning and Precautions
Thank you for purchasing our high-performance multifunctional i3TOUCH.
As a valuable oering better audio and visual experience, this product has considered the personal safety fac-
tors in design and been tested strictly before delivery.
However, improper installation and use may cause electric shock or re.
To ensure its safe use, maintain its service life and bring its best performance into full play, please read and
understand the operating instructions and nameplates and observe the following safety precautions carefully
before using the product, and keep this Manual properly for future reference.
Warning -- May cause casualties
Prohibited actions
In case of
Power outage or unstable voltage.
Abnormal sound or smell.
Damaged AC power cord.
Product damage caused by fall, strike or impact; or
Any object or liquid falling into the product.
In case of any ammable gas leakage, do not connect/disconnect the power plug of this product or any other
electrical appliance but close the leaky valve and open the doors and windows immediately.
Turn o the product immediately,
disconnect the power plug from the
power socket and contact an authorized
professional maintenance
engineer for repair.

Safety Warning and Precautions
Warning
Use AC 100-240V, 50/60Hz only.
Cut o power supply before connecting/disconnecting anycable.
To avoid the risk of fall, damage and re,donotx the product to any unstableposition.
Do not place the product in anyenvironment:
1. That is too damp, hot, cold or dusty or exposed to directsunlight;
2. Where ammable or explosive substances are stored orused;
3. Where there are combustible or corrosivegases.
4. Like bathroom and kitchen.
Do not use any damaged or inappropriate power outlet. Keep a good contact between thepowerplugandoutlet.
Protect the power plug and outlet against dust and metalattachments.
Do not damage the power cord:
1. Do not remodelit;
2. Do not put heavy objects on it;
3. Keep it away from heatsources;
4. Do not pull it when disconnecting the powerplug.
Paralleling multiple power plugs to one power outlet may cause re due to excessive power consumption.
To avoid the risk of electric shock and re, keep the product away from naked ames (like burningcandles).
Do not put any container with water on the product, or the water drops or splashes could cause electric shock
or re.
To avoid the risk of short circuit, product damage and electric shock, do not insert any sharp object, metal or
liquid into or allow them to contact the ventilation holes or signalconnectors.
The ventilation holes in the housing are designed to protect the inside components against overheat and ensure
their long-term reliable work. The product should be placed without blocking such ventilationholes.
To avoid the risk of electric shock, do not touch the power plug with wet hands.
In case of rainstorm or lightning, disconnect the power plug and antenna plug immediately to protect
the product against lightning stroke.
To avoid the risk of electric shock and re, do not disassemble the product in any way.
All repairs should be referred to professional technicians.

Safety Warning and Precautions
Caution
Do not allow children to climb the product.
To avoid the risk of swallow, keep small accessories beyond the reach of children.
Turn o the product and disconnect the power plug beforekeepingtheproductidleforalongtimeforanyreason.
Disconnect all cables before changingthepositionor angle of the product. To avoid the risk of fall, move the
product slowly.
Do not use hard objects to rub or strike the screen or twist or press it forcibly.
To avoid the risk of dew and fault, do not use the product immediately after moving it from a low- temperature
place to a higher-temperatureplace.
Disconnect the power plug before cleaning the product with a soft cloth without using any industrial chemical.
Prevent any foreign object from falling into the product. Improper cleaning may cause damage to the appear-
ance, erase the printed information or damage the components (if the cleaning uid or water ows into the
product) and cause display failure.
If the product keeps displaying one image or there is any still text or icon in a moving image during a long time,
a ghosting will be left on the screen and survive long after the product is turned o. Such fault is not covered by
the warranty.
Cut o power supply to the product by disconnecting the powerplug.
If the leakage splashes onto your skin when the LCD screen is broken, rinse the skin with clean water for 15
minutes and seek medical advices.
Hold the four corners and bottom side rather than exert pressure on the front panel when moving the product
with hands.
Use the product in a healthy way: use it under an appropriate light condition; insucient light or long continu-
ous use may damage your vision.
The power plug or appliance coupler acting as the make and break device should be easy to operate.
Insert the power plug into the power socket reliably. A loose connection may cause sparks or re.
The technical specications provided in this manual and on the carton are subject to change without further
notics. If there is any dierence between this manual and any actual operations, such actual operations shall
prevail.

Safety Warning and Precautions
Mounted on the wall Ventilation
Keep clearances around the product
according to the minimum dimensions
shown in the picture.
Never cover the ventilation holes or insert
any object in the housing.
Do not place the product in a con ned
space such as bookcase or imbedded
closet unless appropriate ventilation con
ditions are provided. There should be
adequate clearances around the product
to ensure good ventilation.
PackingList
Caution:
If you have any problem in operating, debugging or connecting the product, contact your dealer.
If the product has any fault,cuto power supply immediately and contact yourdealer.
As a Class-A product, it may produce radio interference in living environments.
In such case, using an additional power plug as the make and break device will be a practical way to restrain
interference.
Item
LCD Electronic Whiteboard x 1
Remote Control x 1
User’s Manual x 1
Power Cord x 1
Styluses x 2
3m HDMI Cable x 1
Item
Disc (Optional) x 1
Warranty Card x 1
Certi cate of Conformity x 1
Wall-mount Instructions (Optional) x 1
Battery (Optional) x 1
3m USB Cable A-B x 1

Installation and connection
Installation Tips
Install the product near an AC power outlet with easy access.
For the sake of safety, you are suggested to use a  tting wall-mount bracket or base for the product.
To avoid injury, the product must be placed on a stable horizontal surface or  xed to a solid wall.
Wall mounting of the product must be completed by a professional technician. Improper installation may cause
unsteadiness of the product.
Do not put the product in a place that may be exposed to mechanical vibration.
Do not put the product in a place where insects may enter.
Do not place the product directly facing an air conditioner; otherwise dew can be formed on the panel inside the
display, further resulting in fault.
Do not place the product near any strong electromagnetic  eld; otherwise it will be subjected to electromagnetic
interference and get damaged.
Ports
Remark:
Diff erent models in the same series may have slightly diff erent ports.
The above pictures are subject to the actual product.
1. Powerport; 2. HDMI ports; 3. LANport; 4. VGAport; 5. PC-AUDIO port; 6. TV antennaport; 7. AV-OUTport;
8. YPbPr/YCbCr INports; 9.AV-IN port; 10. AUDIO IN port; 11. USB ports; 12. Headset port; 13. SPDIF port;
14. TOUCH-USB ports; 15. OPS PC-USB port; 16. RS232 IN/OUT port; 17. Front panel audioport;
18. Front panel MIC port; 19. Front panel USB ports; 20. Front panel HDMI port; 21. LED light sensor
Caution: Disconnect the power plug before installing or removing theproduct!
17 18 19 20 21

Installation and connection
Connection Diagram
Schematic diagram for connecting the product to a PC.
(Note: Disconnect the power plug before installing or removing the product!)
Connection diagram
Connection ports on the product
Connection ports
on the PC
Remark: The connection diagram in this Manual is only for reference when connecting a PC box, which is subject
to actual operations.

Installation and connection
Control Buttons on the Front Panel
1. Power On/Stand by button;
2. Press this button to show the Settings menu;
3. / VOL + / VOL - button; in the OSD menu, press these two buttons to adjust the analog value of a
selected item; their functions are identical to / on the remote control;
4. / CH+ / CH - button; in the OSD menu, press these two buttons to select adjustment items up and down;
their functions are identical to / on the remote control;
5. Enable/disablethegesturefunction(showingtheshortcutmenubya swipegestureontheleftor rightside);
6. Indicator and remote receiver;
7. On/O button (“I”indicates On; “O” indicates O . This button is optional, subject to the actual product.)
Remark: Di erent models may have slightly di erent appearances.
The above pictures are subject to the actual product.
1 2 3 4 5
6
7
2. Press this button to show the Settings menu;
5. Enable/disablethegesturefunction(showingtheshortcutmenubya swipegestureontheleftor rightside);

Remote Control
Install Batteries in the Remote Control:
Remove the battery compartment cover and follow the polarity marks “+” and “-” in the battery compartment to
install two AAA batteries (No.7, 1.5V).
Precautions for Use of Remote Control:
Aim the remote control at the remote receiver when using the remote control. Any object placed between the
remote control and the remote receiver may disturb normal operation.
Protect the remote control from violent vibration. Besides, never set or place the remote control in direct
sunlight because heat will result in deformation of the remote control.
When the remote receiver on the main unit is subject to direct sunlight or strong light, it is possible that the
remote control malfunctions. In such case, please change the angle of lighting or the machine, or operate the
remote control close to the remote receiver.
Low battery voltage will aect the remote control distance. Please replace the batteries with new ones. If the
remote control is to be left unused for a long period or the batteries are depleted, please remove the batteries
in order to avoid battery leakage which may corrode and damage the remote control.
Never use batteries of dierent types or mix a new battery with a used one. Always replace batteries inpair.
Never try to dispose of batteries in a re or recharge or decompose batteries. Never recharge, short-circuit,
disassemble/assemble, heat or burn any used batteries. Please dispose of waste batteries according to
applicable environmental regulations. Do not expose batteries to any hot environment, like direct sunlight, over
the re, etc.
Remark: The actual appearance of the remote control may be dierent from the picture.

KEY Description
STANDBY Switch between normal operation and standby
SNAPSHOT Take screenshot
MUTE Enable or disable sound
LETTER/NUMERIC KEYS Input any letters and number
F1 (FREEZE) Enable or disable freeze function in the system
CHANNEL LIST Allow backspace when inputting characters / view TV channel list
HOME Display the home page of the product
MENU Display the main Settings menu
CURSOR KEYS Select or adjust menu options
VOL +/- Adjust volume
BACK Return to the previous setting interface
SOURCE Display the source selection menu (valid only in TV mode)
CH +/- Turn channels up/down
SOUND MODE Select the sound mode of the product
SLEEP Set the sleep time and auto standby when the speci ed time is reached
OSD Display channel info of the product
ZOOM Switch the channel display ratio on the screen
PICTURE MODE Select the picture mode of the product
FAVORITE LIST Display the list of your favorite TV channels
SYSTEM Only for switching TV systems
NICAM (Optional) Select the NICAM mode of the product
OK (OK) Con rm the operation
PLAY
For operation of multimedia functions in the intelligent platform
PAUSE
STOP
ROTATE
PREVIOUS
NEXT
FE
FF
Keys on the Remote Control

Basic operations
Power On/Stand by
Insert the powerplug into the power outlet.
First turn on the On/O button “ “ on the product, then press “ ” on the remote control or control panel to
turn on the product. In power-on state, press “ ”, and the product will enter standby.
Source Selection
Upon startup, press “ SOURCE ” on the remote control; the screen will display the “InputSource” menu. At this
moment, you can press “ / ” on the remote controlor “ VOL+/VOL- ” on the front panel to select a source.
Press “ OK ” on the remote control; the product will switch to the input source selected.
Menu Operations
The menu operations described in this chapter are all in the video sources mode.
Menu operations in other modes are basically the same. For operations in the intelligent mode, please refer to
the instructions on operation of the intelligent platform below.
1. Press the “ MENU ” key on the remote control or on the front panel; the screen will display the main menu:
Press “ / ” on the remote control or “ VOL+/VOL- ” on the front panel to select an adjustment category menu.
Adjustment category menus include: Picture, Sound Mode Adjustment, Channel, and Settings.
2. Press “ / ” on the remote control or “ CH+/CH- ” on the front panel to select the desired item in the
category menu.
3. Press “ OK ” on the remote control to enter the item to be adjusted.
4. Press “ / ” on the remote control or “ VOL+/VOL- ”on the front panel to change the analog value or setting
of the adjustment item selected.
When the screen displays the main menu, press the “ MENU ” key to exit the main menu.
During menu operation, the color of an option icon that cannot be operated in the current state will change to
grey.

Basic operations
List of Menu Settings
Picture
Picture Mode Select (Di erent options are provided under di erent sources)
Contrast Measure the luminance between the brightest white and the darkest black that can
be produced in the light and dark areas of a picture.
Brightness Adjust the overall brightness of pictures: increase the analog value to enhance the
brightness; decrease the analog value to reduce the brightness (0-100).
Hue Adjust the hue of pictures: increase the analog value to change the hue to green;
decrease the analog value to change the hue to purple (0-100).
Sharpness Adjust the black-white gradation of pictures: increase the analog value to improve
the sharpness; decrease the analog value to reduce the sharpness (0-100).
PC Screen Adjustment Automatically correct the screen (valid only under VGA signal).
Saturation Adjust the color depth of pictures: increase the analog value to increase the color
depth; decrease the analog value to reduce the color depth (0-100).
Color Temp Adjust the overall color temperature of pictures: Standard, Warm, and Cold.
Zoom Mode Adjust the aspect ratio: Full Screen, 4:3, Movie, and Subtitle. In 75E89K-U, there is
slight di erence in Zoom Mode under di erent sources.
PC image adjustment Adjust the image display range in PC mode (available under PC signal source).
Remark: The analog values of Contrast, Brightness, Hue, Sharpness and Saturation are adjustable only in User Mode.
Sound
Sound mode Select the sound e ect mode: Standard, Music, Movie, and User.
Bass Adjust the bass level: increase the analog value to raise the bass level; decrease the
analog value to lower the bass level (0-100).
Treble Adjust the treble: The bigger the analog value (0-100), the higher the treble.
Sound Balance
Adjust the balance between left and right channels: adjust the analog value leftward to
increase the volume of left channel; adjust the analog value rightward to increase the
volume of right channel (L50-R50). Generally, the balance is set to 0.
AVC Select enabling or disabling surround sound e ect
SPDIF OUT Select the digital sound output mode: PCM, RAW, and OFF.
Remark: The analog values of Bass and Treble are adjustable only in User Mode.

Basic Operations
Basic Operations
Press “ ” to display the main interface of the intelligent mode (as shown in the  gure).
Press “ / / / ”to select an app;
Press “ OK ” to run the app;
Special Tips
Operations are complex in the intelligent mode; user itself can install apps. Di erent apps are operated
di erently. The app operation methods introduced in this Manual are for reference only. User shall operate
the product according to the actual situation. Some functions cannot be achieved with the remote control. To
ensure convenient operation, user is suggested to operate with a USB mouse and keyboard. The mouse and
keyboard should be connected to the USB ports.
Intelligent Platform Operations
Channel Channel Edit
Select Channel > Channel Edit; then press “ OK ” to enter the Channel Edit submenu;
press “ / ” to select a channel.
1: Skip: Press the numeric key “ 1 ” to enable or disable skipping the channel selected;
2. Edit: Press the numeric key “ 2 ” to edit the info of the channel selected;
3. Favorite: Press the numeric key “ 3 ” to add the channel selected to the favorite list;
4. Delete: Press the numeric key “ 4 ” to delete the channel selected;
5. Move: Press the numeric key “ 5 ”; then press “ / ” to move the position of the
channel selected; press the numeric key “5” to con rm the operation.
Signal Information Signal information (non-adjustable)
Settings
OSD Time Adjust the OSD time: 5s, 10s, 15s, 20s, 30s, and Constant.
MHL Auto Switch Adjust MHL auto switch: two modes are available, namely, ON and OFF; it is non- adjustable
only under HDMI4.
HDMI_CEC Adjust HDMI-CEC mode: two modes are available, namely, ON and OFF.
HDMI EDID Version Adjust HDMI EDID version: Default Mode, EDZD1.4, and EDZD2.0.
Restore to Defaults Restore all settings to factory defaults, and restart the system.
Press “ ” to display the main interface of the intelligent mode (as shown in the  gure).

Intelligent Platform Operations
QuickStart
Prior to use of the product, please get familiar with the following operations to ensure a better experience.
Mouse Operation
1. Click: Click the mouse and then release it immediately;
2. Long press: Press the mouse for more than 3s; then release it;
3. Clicking the left mouse button provides the same e ect as the “ OK ” key on the remote control.
4. Clicking the right mouse button provides the same e ect as the “ Back ” key on the remote control.
Language and keyboardsettings
Language: Select Settings > Preferences > Language in the intelligent mode, and press “ OK ”; press “ / ”
to select the desired language, and press “ OK ”.
Select input method: Select Settings > Preferences > Keyboard > Current Keyboard in the intelligent mode,
and press “ OK ”; select the desired input method in the option menu, and press “ OK ” to con rm the choice.
The system is provided with “ Android Keyboard ” and “ Google Pinyin Input Method ”.
User can also download a third-party input method.
System time setting: Select Settings > Date & Time > Auto Determination of Date & Time in the intelligent
mode, and press “ OK ”. The system will automatically get the time from the network and update it.
If the product is not connectedtothenetwork,you can only manually set the system time in Date & Time.
Screenshot: Before taking a screenshot, please insert the USB storage device to a USB port of the product, and
press “ SNAPSHOT ” key. After taking a screenshot, the picture is stored in the “ :\Pictures\Screenshots ” folder
in the USB storage device.
Intelligent Application
Browser: You can use the browser to display the text, images, sound and other information from the Internet.
Before access to the Internet, connect the product to the Internet.
For speci c setting methods, refer to “ Settings> Device> Network ”.
1 Go back to previous webpage
2 Go forward to next webpage
3 Refresh page
4 Browser window
5 Close current window
6 Add new window
7 URL input box
8 Add bookmark
9 Search
10 Browser menu
11 Favorites
1
2
3 4 5 6 7 8 9 10
11

Intelligent Applications
How to visit a website?
Firstly press “ / / / ” keys to select the website input box and then input the network address to be
accessed in the website box; at last, select the Go icon on the virtual keyboard and press the “ OK ” key to access
the website.
How to add a page as a bookmark?
Firstly select icon in main interface of the browser and press the “ OK ” key; and then input the browser label
and website. Select an account and press the “ OK ” key; and then press the “ / ” keys to select the storage
account, and press the “ OK ” key. Press the “ OK ” key to add the bookmark.
How to copy and paste text from a webpage?
Move the cursor over the text to be copied; long press the left mouse button, and then a pair of selecting
cursors will appear on the screen. Drag the selecting cursors to select the text; select COPY on the top of screen
and click the left mouse button to select the position to paste; long press the left mouse button and click PASTE
in the popped up dialog box.
E-mail: The e-mail sending option helps the user to login the individual or corporate email account; and then the
user can receive and send e-mails.
Music: Before using the function,please insert
USB storage device into the USB interface on
the product.
1. In intelligent mode,
select All Applications > Music,
and press the “ OK ” key tooperate;
2. The submenu provides [Music], [Artist]
and [Special] for selection, and press the “ OK ” key to con rm.
APK Installer: The APK Installer option helps user to manage apps. User can install setup  les stored in the local
disk or uninstall locally installed apps.
Tip: You can access Settings > Security & Restrictions > Unknown Sources to set whether it is allowed to install
apps not from the App Store and also set the preferred installation location or operate all apps.
How to install an app? After entering APK installation, select Install and press “ OK ”. Select the path of
target setup  le in the local disk, and  nd the app installation package to be installed from the box on theright
side, and press “ OK ”.
How to delete an app? First select Manage, and press “ OK ”; then select the app to be uninstalled,
and press “ OK ”; last select Uninstall and click “ OK ”; the system will automatically uninstall the app.
Firstly select icon in main interface of the browser and press the “
1 Display the playlist
2Shuffl e play
3 Repeat play
4 Artist of current song
5 Album of current song
6 Name of current song
7 Progress bar; drag the cursor using the mouse to adjust the play progress
8FR/Previous Chapter; click the left mouse button to play the previous song; long
press the left mouse button to activate the FR function.
9 Play/pause
10 FF/Next Chapter; click the left mouse button to play the next song; long press
the left mouse button to activate the FF function.

Intelligent Applications
Multimedia Player (if the APK installer is not pre-installed,
you can access the  le manager to select and install the
corresponding APK app): Connect the USB storage device
via USB port; select Local Play in the main interface of
intelligent mode, and press “ OK ” to run it.
Select a  le category among All, Image, Song and Video
on the left side. Play  les in the local disk: Before playing a
 le in the local disk,  rst insert the USB storage device to a
USB port on the product. Select Local Disk from the  le
directory in the middle, and press “ OK ”. Select Back in the
directory; press “ OK ” to return to the previous folders;
select a directory folder, and press “ OK ” to enter the folder; press “ Back ” to return to the desktop.
Caution:
It is possible that some non-standard USB devices cannot be recognized; please use a standard USB device.
The streaming media system has certain restrictions on the format of each  le played; errors will be caused if
going beyond such restrictions.
Do not plug or remove the USB device when the system is playing a  le; otherwise system or device failures will
occur.
This system supports USB  ash drives, mobile hard drives and other devices with standard USB 1.1 and USB 2.0
port transmission protocols.
The maximum output current of USB ports on theproduct is 500mA; the product will enter self-protection when
this limitis exceeded. If you connect an external device with heavy current, it is suggested to use an external
powersupply.
The system of this product is very complex, equivalent to a computer system. There fore, if the screen freezes
or the product malfunctions due to such factors as compatibility and stability of the USB device when reading or
playing a  le, please try turning o the product and reinitializing the system.
Description of option icons in the play interface
Options in the image player menu
Options in the song player menu
Play the previous image.
Pause/start slide show.
Play the next image.
Zoom in an image.
Zoom out an image.
Rotate an image leftward by 90°.
Rotate an image rightward by 90°.
Show the details of an image.
Set image playback.
Play the previous song
Pause/start music playback.
Play the next song.
Set the song play mode: Repeat All, Repeat One, and Shuffl e.
View the song playlist.
Show the details of a song.

Intelligent Applications
Options in the video player menu
During playback, press “ OK ” to display the menu options shown above. Select the corresponding icon, and
press “ OK ” to execute the operation. User can press “ Back ” to exit playback, or press “ , , ,
and ” on the remote control to perform shortcut operations.
Settings
Visible Password:
Show the password when entering the password
during PPPOE dial-up and wireless network connection.
Select Visible Password, and press “ OK ” to enable or
disable the function.
Network Settings:
Select Network Settings under Settings in the
intelligent mode, and press “ OK ”.
Wired Network Settings:
Prior to use of wired network,  rst connect one end of the network cable to the network port on the
product, and the other end to the router.
1. If your router is set to allow automatically obtaining an IP address, select Advanced Options > DHCP for IP
Con guration, and press “ OK ”; the product will automatically obtain an IP address.
2. If your router is not set to allow automatically
obtaining an IP address, you must complete network connection by the following steps (select Static in TP
con guration);
3. Select IP Address, and con gure an available IP address for the product;
4. Select Default Gateway, and con gure an available gateway for the product;
5. Select Network Prefi x Valid Length, and con gure a valid length of subnet mask for the product;
6. Select Preferred DNS 1 and Alternate DNS 2, and con gure an available DNS server address for the product;
7. Select Save, and press “ OK ”; the system will give a prompt indicating the setting is  nished.
8. Select Subnet Mask, and con gure an available subnet mask for the product;
9. Select Default Gateway, and con gure an available gateway for the product;
Select Network Prefi x Valid Length, and con gure a valid length of subnet mask for the product;
10. Select Preferred DNS 1 and Alternate DNS 2, and con gure an available DNS server address for the product;
11. Select Save, and press “ OK ”; the system will give a prompt indicating the setting is  nished.
Play the previous chapter.
Select the fast rewind rate.
Pause/start video playback.
Select the fast forward rate.
Play the next chapter.
Select the viewing time point
View the playlist.
Display the details of a video
Playback settings; enable subtitle display and adjust audio track progress
with this option.
Set repeat play of the A-B segment. After setting points A and B, the A-B
segment of the video will be played repeatedly.

Intelligent Applications
WiFi Hotspot:
Set the product as a hotspot for wireless network connection with this option.
1. Select WiFi Hotspot, and press “ OK ” to enable the WiFi hotspot function;
2. Select Confi gure WiFi Hotspot, and press “ OK ”;
3. Enter the net work name (SSID) in the text box. The default name in the system is “ AndroidAP ”; you can also
change it to other names;
4. Select Security; to select the security type. If it is used as an open network, it is unnecessary to set any pass-
word, but any devices searching out your network can be connected to your open WiFi network. If you select
WPA PSK/WPA2 PSK for encryption, you need to enter a protection password having more than 8 bits.When
other devices search out the WiFi network you have shared, the correct password must be entered to connect
your network;
After selecting Encrypt, the system will automatically con gure a password for you; you can also enter a
password in the password  eld;
Select Save, and press “ OK ” to save the setting; other WiFi devices within the area will search out your network
during WiFi network search.
Caution: Please set the network password which should not be too simple.
Description of sidebar: First press Source once to show the sidebar by swiping on the right side; then press
Source again to close the sidebar.
Caution: It can be used when opened, and cannot be used when closed.
Source Selection
Back
Main interface
Volume Adjustment
Screenshot
File Manager
System Settings
Notation whiteboard software
Toolbar
Freeze

Important Statement on Network Service
All contents and services obtained from the product are owned by third parties and protected by copyright,
patent, trademark and/or other intellectual property laws. These contents and services are only for your
personal non-commercial purposes, which shall not be used in a way not authorized by the content owner or
serviceprovider.
Under no circumstance shall our Company be liable for any direct, indirect or unexpected losses or
damages arising from your or any third party’s access to any contents or services or any information or
third-party software through this product.
Third-party services may be subject to change, removal or discontinuation without prior notice. Our Company
does not represent or warrant that some services or contents will remain accessible at any time.
Our Company will not be responsible for any service related to these contents and services, or assume any
liability for customer service. For any question or service request about these contents and services, please
directly contact your content or serviceprovider.
Troubleshooting
Sympton Possible Cause Solution
Pictures shown on the product have snow spots; noise
can be heard in the accompanying sound
1. Looseness of antenna connector, cable damage
2. Wrong antenna type
3. Wrong antenna orientation or position
4. Weak signal
1. Check if the antenna connector is
loosened and if the cable is in good
condition
2. Check the antenna type (VHF/
UHF)
3. Adjust the antenna orientation
and position
4. Try using a signal booster
The screen does not display anything; there is no sound,
and the indicator does not come on Looseness of power plug, power connection failure Check if the power cord is properly connected
Pictures shown on the product have dotted line or stripe
interference
Signal interference caused by automobile, neon light,
electric hair dryer, etc.
Do not use the electric hair dryer
near the product; adjust the anten-
na orientation to reduce interfer-
ence
Pictures shown on the product have dotted line or stripe
interference
Signal interference caused by automobile, neon light,
electric hair dryer, etc.
Do not use the electric hair dryer
near the product; adjust the anten-
na orientation to reduce interfer-
ence
Pictures shown on the product have ghosting
1.The product signals are reected by surrounding moun-
tains or buildings
2.Wrong antenna orientation
1. Use a highly directional antenna
2. Adjust the antenna orientation
Pictures are colorless Color saturation is set too low Enter “Picture” settings to increase
the color saturation
The product has no accompanying sound 1. Volume is set too low
2. Sound is muted
1. Adjust the volume to a
proper level
2. Press the “MUTE” key on the re-
mote control to unmute the product
The PC does not display and gives a prompt indicating no
signal input; the red indicator blinks
Looseness or come-o of the signal
connection cable
Check if the signal connection cable
is loosened or comes o; if so,
reconnect it