Winmate R12IBWS-MHM2 User manual

M-Series HMI
12.1”/ 15”/17”/19”/21.5”P-CAP touchscreen
Intel® Atom™E3845 1.91 GHz
Multifunctional Design
Model No.:
R12IBWS-MHM2
R15IBWS-MHC3
R17IBWS-MHM1
R19IBWS-MHA1
W22IBWS-MHA3
User Manual
Version 1.1
Document Part Number: 9152111I100P

M-Series HMI
ii
PREFACE
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including circuits
and/or software described or contained in this manual in order to improve design and/or
performance. We assume no responsibility or liability for the use of the described product(s)
conveys no license or title under any patent, copyright, or masks work rights to these
products, and make no representations or warranties that these products are free from
patent, copyright, or mask work right infringement, unless otherwise specified. Applications
that are described in this manual are for illustration purposes only. We make no
representation or guarantee that such application will be suitable for the specified use
without further testing or modification.
Warranty
Our warranty guarantees that each of its products will be free from material and
workmanship defects for a period of one year from the invoice date. If the customer
discovers a defect, we will, at his/her option, repair or replace the defective product at no
charge to the customer, provide it is returned during the warranty period of one year, with
transportation charges prepaid. The returned product must be properly packaged in its
original packaging to obtain warranty service. If the serial number and the product shipping
data differ by over 30 days, the in-warranty service will be made according to the shipping
date. In the serial numbers the third and fourth two digits give the year of manufacture, and
the fifth digit means the month (e. g., with A for October, B for November and C for
December).
For example, the serial number 1W14Axxxxxxxx means October of year 2014.

M-Series HMI
iii
Customer Service
We provide a service guide for any problem by the following steps: First, visit the website of
our distributor to find the update information about the product. Second, contact with your
distributor, sales representative, or our customer service center for technical support if you
need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We
are always ready to give advice on application requirements or specific information on the
installation and operation of any of our products.

M-Series HMI
iv
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful information or
to alert you to the potential for hardware damage or personal injury. These are Notes, Important,
Cautions, and Warnings. The following is an example of each type of advisory.
NOTE:
A note is used to emphasize helpful information
IMPORTANT:
An important note indicates information that is important for you to know.
CAUTION/ ATTENTION
A Caution alert indicates potential damage to hardware and explains how to
avoid the potential problem.
Une alerte d’attention indique un dommage possible à l’équipement et explique
comment éviter le problème potentiel.
WARNING!/ AVERTISSEMENT!
An Electrical Shock Warning indicates the potential harm from electrical
hazards and how to avoid the potential problem.
Un Avertissement de Choc Électrique indique le potentiel de chocs sur des
emplacements électriques et comment éviter ces problèmes.
ALTERNATING CURRENT / MISE À LE TERRE!
The Protective Conductor Terminal (Earth Ground) symbol indicates the
potential risk of serious electrical shock due to improper grounding.
Le symbole de Mise à Terre indique le risqué potential de choc électrique
grave à la terre incorrecte.

M-Series HMI
v
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections while
the power is on. Sensitive electronic components can be damaged by
sudden power surges. Only experienced electronics personnel should
open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque vous
travaillez sur celui-ci. Ne pas brancher de connections lorsque
l’alimentation est présente. Des composantes électroniques sensibles
peuvent être endommagées par des sauts d’alimentation. Seulement du
personnel expérimenté devrait ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge before touching the
CPU card. Modern electronic devices are very sensitive to static electric
charges. As a safety precaution, use a grounding wrist strap at all times.
Place all electronic components in a static-dissipative surface or static-
shielded bag when they are not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements électroniques
moderns sont très sensibles aux décharges d’électricité statique.
Toujours utiliser un bracelet de mise à la terre comme précaution. Placer
toutes les composantes électroniques sur une surface conçue pour
dissiper les charge, ou dans un sac anti-statique lorsqu’elles ne sont pas
dans le chassis.

M-Series HMI
vi
Safety Precautions
For your safety carefully read all the safety instructions before using the device. Keep
this user manual for future reference.
Always disconnect this equipment from any AC outlet before cleaning. Do not
use liquid or spray detergents for cleaning. Use a damp cloth.
For pluggable equipment, the power outlet must be installed near the
equipment and must be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or letting
it fall could cause damage.
The openings on the enclosure are for air convection and to protect the
equipment from overheating.
CAUTION/ATTENTION
Do not cover the openings!
Ne pas couvrir les ouvertures!
Before connecting the equipment to the power outlet make sure the voltage of
the power source is correct.
Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
If the equipment is not used for a long time, disconnect it from the power
source to avoid damage by transient over-voltage.
Never pour any liquid into an opening. This could cause fire or electrical shock.
Never open the equipment. For safety reasons, only qualified service personnel
should open the equipment.
All cautions and warnings on the equipment should be noted.
*Let service personnel to check the equipment in case any of the following
problems appear:
oThe power cord or plug is damaged.
oLiquid has penetrated into the equipment.
oThe equipment has been exposed to moisture.
oThe equipment does not work well or you cannot get it to work
according to the user manual.
oThe equipment has been dropped and damaged.
oThe equipment has obvious signs of breakage.
Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the
equipment.

M-Series HMI
vii
CAUTION/ATTENTION
Use the recommended mounting apparatus to avoid risk of injury.
Utiliser l’appareil de fixation recommandé pour éliminer le risque
de blessure.
WARNING! / AVERTISSEMENT!
Only use the connection cords that come with the product. When
in doubt, please contact the manufacturer.
Utiliser seulement les cordons d’alimentation fournis avec le
produit. Si vous doutez de leur provenance, contactez le
manufacturier.
WARNING!/ AVERTISSEMENT!
Always ground yourself against electrostatic damage to the
device.
Toujours vérifier votre mise à la terre afin que l’équipement ne se
décharge pas sur vous.
Cover workstations with approved anti-static material. Use a wrist strap
connected to a work surface and properly grounded tools and equipment.
Use anti-static mats, heel straps, or air ionizer for added protection.
Handle electrostatic-sensitive components, PCB’s and assemblies by the case
or the edge of the board.
Avoid contact with pins, leads, or circuitry.
Turn off power and input signals before inserting and removing connectors or
test equipment.
Keep the work area free of non-conductive materials, such as ordinary plastic
assembly aids and Styrofoam.
Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that
are conductive.
Always put drivers and PCB’s component side on anti-static foam.

M-Series HMI
viii
Important Information
Countries/ Area
Symbol
This equipment complies with essential
requirements of:
European Union
Electromagnetic Compatibility Directive (2014/30/EU)
Low Voltage Directive (2014/35/EU)
Restrictions of the use of certain hazardous
substances (RoHS) Directive (2011/65/EU)
USA
FCC Part 15 Subpart B Regulations Class B
Federal Communications Commission Radio Frequency Interface Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "B" digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at him own expense.

M-Series HMI
ix
European Union
This equipment is in conformity with the requirement of the following EU legislations and
harmonized standards. Product also complies with the Council directions.
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

M-Series HMI
x
ABOUT THIS USER MANUAL
This User Manual provides information about using the Winmate® M-Series HMI with Intel®
Atom™ E3845 1.91 GHz processor. The documentation set for the M -Series HMI provides
information for specific user needs, and includes:
M-Series HMI User Manual –contains detailed description on how to use the HMI, its
components and features.
M-Series HMI Quick Start Guide - describes how to get the HMI device up and running.
NOTE:
Some pictures in this guide are samples and can differ from actual product
Revision History
Version
Date
Note
1.0
21-Mar-2016
Initial release
1.1
11-Jul-2016
Modify mounting solutions

M-Series HMI
xi
CONTENTS
PREFACE ............................................................................................................................ii
ABOUT THIS USER MANUAL ...............................................................................................x
CHAPTER 1: INTRODUCTION...............................................................................................1
1.1 Product Features....................................................................................................... 1
1.2 Package Contents...................................................................................................... 2
1.3 Product Overview .....................................................................................................3
1.4 Dimensions................................................................................................................4
1.4.1 Dimensions 12.1” ...........................................................................................4
1.4.1 Dimensions 15” ..............................................................................................5
1.4.2 Dimensions 17” ..............................................................................................6
1.4.3 Dimensions 19” ..............................................................................................7
1.4.4 Dimensions 21.5” ...........................................................................................8
CHAPTER 2: GETTING STARTED.........................................................................................10
2.1 Powering On............................................................................................................ 10
2.1.1 AC Adapter Components.............................................................................. 10
2.1.2 Power Considerations ..................................................................................11
2.1.3 Connecting the Power..................................................................................11
2.2 Connector Pinouts ..................................................................................................13
2.2.1 Isolated DC in Connector.............................................................................. 13
2.2.2 Audio Out and Audio In................................................................................13
2.2.3 COM1 Serial Port Connector ........................................................................13
2.2.4 HDMI Output Connector ..............................................................................14
2.2.6 USB 2.0 Connector........................................................................................14
2.2.7 VGA Output Connector ................................................................................14
2.2.8 LAN (RJ45) Connector...................................................................................15
2.3 Configuring Serial Port Settings ..............................................................................16
2.4 Turning On and Off .................................................................................................17
CHAPETR 3: OPERATING THE DEVICE ................................................................................19
3.1 Operating System.................................................................................................... 19
3.2 Multi-Touch............................................................................................................. 20
3.3 Adjusting the Display Brightness ............................................................................ 21

M-Series HMI
xii
CHAPTER 4: DRIVER INSTALLATION ..................................................................................23
4.1 Chipset Driver..........................................................................................................23
4.2 Graphics Driver .......................................................................................................26
4.3 Audio Driver ............................................................................................................ 27
4.4 Intel Sideband Fabric Device (Intel MBI) Driver (Windows 8) ............................... 28
4.5 Intel Trusted Engine Interface (Intel TXE) Driver.................................................... 29
4.6 Intel Network Connections .....................................................................................30
4.7 USB 3.0 Driver (Windows 7).................................................................................... 31
CHAPTER 5: AMI UEFI BIOS SETUP ....................................................................................33
5.1 When and How to Use BIOS Setup .........................................................................33
5.2 BIOS Functions ........................................................................................................ 33
5.2.1 Main Menu ...................................................................................................34
5.2.2 Advanced Menu ........................................................................................... 36
5.2.3 USB Configuration ........................................................................................38
5.2.4 Chipset..........................................................................................................40
5.2.5 Security.........................................................................................................43
5.2.6 Boot .............................................................................................................. 45
5.2.7 Save & Exit....................................................................................................46
5.3 Using Recovery Wizard to Restore Computer ........................................................48
CHAPTER 6: MOUNTING...................................................................................................51
6.1 Cable Mounting Considerations ............................................................................. 51
6.2 Safety Precautions .................................................................................................. 52
6.3 Mounting Guide......................................................................................................53
6.3.2 Panel Mounting ............................................................................................53
6.3.1 VESA Mounting............................................................................................. 54
CHAPTER 7: TECHNICAL SUPPORT.....................................................................................56
7.1 Software Developer Support .................................................................................. 56
7.1.1 Winmate Download Center..........................................................................56
7.1.2 Winmate File Share ......................................................................................56
7.2 Problem Report Form .............................................................................................57
APPENDIX A: PRODUCT SPECIFICATIONS ..........................................................................59

USER MANUAL CHAPTER 1 INTRODUCTION
M-Series HMI
1
INTRODUCTION
This chapter gives you product overview,
describes features and hardware
specification. You will find all accessories
that come with the HMI device in the
packing list. Mechanical dimensions and
drawings included in this chapter.

USER MANUAL CHAPTER 1 INTRODUCTION
M-SERIES HMI
1
CHAPTER 1: INTRODUCTION
M-Series HMI is designed to provide versatile and cost-effective solution for your
industrial needs. P-cap multi-touch screen equipped with industrial motherboard offers
various input/ output connectors. Intel® Atom™ E3845 1.91 GHz processor onboard with
fanless cooling system assures steady performance and silent functioning.
M-Series HMI perfectly fits in applications where total costs of ownership (TCO) and
quick recovery of failure is important. The flexible system design provides easy access to
components and can be serviced by local maintenance team.
Versatile, easy-to-service and upgradable M-Series HMI is the best solution for industrial
and building automation.
1.1 Product Features
Winmate® M-Series HMI has the following features:
Signature true flat display screen with edge-to-edge design
Aluminum, anti-corrosion treated housing
Superior Sealing with front IP65 protection against dust and water
Projected Capacitive Multi-Touch (P-CAP)
Fanless cooling system
Modular Design
Support wide range 12-24V isolation DC input
One Quick & Easy Removable 2.5” SSD Bay Slot

USER MANUAL CHAPTER 1 INTRODUCTION
M-SERIES HMI
2
1.2 Package Contents
Carefully remove the box and unpack your HMI device. Please check if all the items listed
below are inside your package. If any of these items are missing or damaged contact us
immediately.
Standard factory shipment list:
HMI Device
Quick Start Guide
(Hardcopy)
Driver CD
Mounting Clips &
Screws
12.1” HMI – 8 pcs
15” HMI – 12 pcs
17”/ 19” HMI – 14 pcs
21.5” HMI – 16 pcs
3-pin Terminal
Block
Power Cord
AC Adapter
(12V/ 80W)

USER MANUAL CHAPTER 1 INTRODUCTION
M-SERIES HMI
3
1.3 Product Overview
No
Description
No
Description
①
12-24V isolation DC in
⑧
COM1
②
LAN
⑨
Audio in
③
LAN
⑩
Audio out
④
USB 2.0 x 2
⑪
HDD indicator
⑤
USB 2.0 x 2
⑫
Reset
⑥
HDMI output
⑬
Power Button
⑦
VGA output
⑭
2.4” SSD Bay

USER MANUAL CHAPTER 1 INTRODUCTION
M-SERIES HMI
4
1.4 Dimensions
This section contains mechanical drawing of the HMI devices. Notice that this is a
simplified drawing and some components are not marked in detail.
1.4.1 Dimensions 12.1”
Unit: mm

USER MANUAL CHAPTER 1 INTRODUCTION
M-SERIES HMI
5
1.4.1 Dimensions 15”
Unit: mm

USER MANUAL CHAPTER 1 INTRODUCTION
M-SERIES HMI
6
1.4.2 Dimensions 17”
Unit: mm

USER MANUAL CHAPTER 1 INTRODUCTION
M-SERIES HMI
7
1.4.3 Dimensions 19”
Unit: mm