IAdea XDS-1078-A9 User manual

XDS-1078-A9
Quick Start Guide
This is a quick walkthrough of the set up process. For complete documentations
and quick start guides, please visit http://support.IAdea.com.
Box Content
Smart
signboard
Power and micro
SD card brackets
Mounting and Installation
Mounting option 1: VESA mount
- VESA standard: VESA MIS-D75 (75 mm x 75 mm)
- Screw: M4 x 4 mm (excluding the mounting plate thickness)
Mounting option 2: using back cover
- Power / SD card brackets MUST NOT be connected when mounting cover
-plate
Mounting option 3: glass mount
- 3M VHB™ Industrial Heavy Duty Mounting Tape (90 mm x 70 mm)
Mounting back cover
1) Release the cover
plate screw to
release cover plate
2) Install cover plate
(thread head height
not to exceed 3 mm)
3) Run power and network
cable from the bottom
and connect to signboard
before mounting
Reseting smart signboard to factory default
Factory reseting the smart signboard will result in the removal of all saved con-
to complete the smart signboard factory reseting process:
Use a pen to press and hold the reset button - do not release until Step 4.1
Insert the power cord.2
Wait 30 seconds for the system reboot indicating your data is erased.3
Release the reset button and your smart signboard will initialize in factory
default state.
4
Content Management
How do I interrupt playback and enter setup menu?
Use USB mouse to click and hold one corner of the screen for 10 seconds to exit
playback and enter setup menu.
How do I provide a DEBUG log for a misbehaving signboard to the support team?
Please follow the instructions below to collect the player's DEBUG log:
Troubleshooting
Prepare a blank USB stick in FAT-32 format.1
Create a folder named "DEBUG" (case insensitive) in the root of USB stick.2
Make sure the player is operating (see welcome screen or playing content).3
Insert the USB stick into player and wait for4
Within the "DEBUG" folder, is a folder with a string of number as its name. If
the string of numbers are all zero's, the debug log has not been collected
properly. Repeat step 1-4 again and make sure to wait .
5
6 Zip the"DEBUG" folder and send to IAdea Support Team.
IAD_DGS_X7S_60EP
Please consult the Solution Store documentation for information
specic to your content management solution.
QR: https://support.iadea.com/hc/en-us/articles/360041795652

Securing power and network cable Securing SD card
1) Insert both
cables
2) Fasten bracket
onto the socket
1) Insert SD
card bracket
2) Fasten SD
card bracket
Securing table stand
Screw the table stand
into stand screw hole.
Supports landscape
and portrait setup.
Glass mount
Landscape
Portrait
1) Order your glass mount kit
2) Scan QR code for user manual
3) Mount your signboard
4) Impress your visitors
Port Connections
QR: http://www.iadea.com/wp-content/uploads/2018/10/PGM-001_User-Manual_2018OCT_web.pdf
Boot up1
System Setup
5 Set content
4
To change smart signboard system language, se-
lect “(Current Language) .... -
rations, select “Advanced.”
2
1
2
Set correct time, date, and time zone for
properly scheduled playback.
Set password to prevent unauthorized
access during setup menu.
Set network for establishing network
connection.
3
Plug in Ethernet cable from PSE (Power Supply
Equipment) to the media player and it will power on
automatically. Once the user has exited the boot up
screen, users can go through system configurations
in both landscape and portrait orientations.
IAD_DGS_X7S_60EP
Users can set content by clicking "Set Content" to
enter Solution Store and scroll down if you'd like to
set custom URL or use the desired content
management system to upload the contents onto
the smart signboard.
3