IAdea XDS-2288 User manual

USER MANUAL
XDS-2288
IAdea 22”Touch-Enabled Digital
Door Sign for Smart Workplace
XDS-2288

2
IAdea 22” Touch-Enabled Digital Meeting Room Door Sign Hardware
Copyright© 2018 IAdea all rights reserved
Package content:
Smart signboard Power adapter Power cord IO cover

3
IAdea 22” Touch-Enabled Digital Meeting Room Door Sign Hardware
Copyright© 2018 IAdea all rights reserved
Physical views and features:

4
IAdea 22” Touch-Enabled Digital Meeting Room Door Sign Hardware
Copyright© 2018 IAdea all rights reserved
Installation:
Signicant temperature deviations and changes in elevation or environment
can lead the glass panel of the smart signboard to trap a slight amount of
moisture. To avoid damaging the smart signboard, the condensation will re-
quire at least 2 - 4 hours to evaporate prior to usage.
Important:
Operating the smart signboard with its back casing pressed down against a
at surface (eg. table top) increases the risk of overheating the smart sign-
board and decreases system performance.
Users are recommended to keep the back casing clear of direct casing-
against-at-surface contact when operating the smart signboard to allow
proper air circulation and minimize overheating the system.
Installing the optional display stand
Mounting with VESA compatible mounting interface
This smart signboard accepts a MIS-D100 (100 mm x 100 mm) VESA-Compli-
ant mounting interface and the recommended screw is M4 x 6 mm excluding
bracket thickness.
Arrange the smart signboard with the
screen pressed down against a clean
cloth, for cushioning, on a still and at
surface.
1
→ → → →
at surface

5
IAdea 22” Touch-Enabled Digital Meeting Room Door Sign Hardware
Copyright© 2018 IAdea all rights reserved
Place the display stand on the mounting
bracket and install the screws.
Rotate the display stand to switch between
portrait or landscape orientation. This
method also works when the smart sign-
board is upright.
2
3
1
Setting Up:
Plug in the AC adapter and Ethernet cable
(if that is the preferred method of con-
necting to network) located at the back of
the smart signboard and it will power on
automatically. Once the user has exited
the boot up screen, users can go through
system congurations in both landscape
and portrait orientations.
2When boot up is complete, the user will
see the “Basic settings” which allows the
user to make congurations or autoplay
pre-loaded content. Please note, the smart
signboard is set to autoplay pre-loaded
content 15 seconds after boot up. This can
be canceled if “Cancel autoplay in 15s”
is selected which lets the user remain on
the “Basic settings” and initiate playback
manually.

6
IAdea 22” Touch-Enabled Digital Meeting Room Door Sign Hardware
Copyright© 2018 IAdea all rights reserved
Reset smart signboard to factory default
3To change smart signboard system lan-
guage, select “(Current Language) ....”
For system congurations, select “Ad-
vanced.”
Important recommended congurations:
1) Set correct time, date, and time zone for
properly scheduled playback.
2) Set password to prevent unauthorized
access during setup menu.
3) Set network for establishing network
connection.
1Use a pen to press and hold the reset button - do not release until Step 4.
2Insert the power cord.
3Wait 30 seconds for the system reboot indicating your data is erased.
4Release the reset button and your smart signboard will initialize in facto-
ry default state.
4Once the smart signboard has completed
all the recommended congurations, com-
plete the last boot up process and your
smart signboard is ready for the pre-load-
ed content management system.

7
IAdea 22” Touch-Enabled Digital Meeting Room Door Sign Hardware
Copyright© 2018 IAdea all rights reserved
Display
21.5” IPS LCD panel
10 points capacitive multi-touch
250 nits maximum brightness
1920 x 1080 (Full HD) panel resolution
Viewing angle (H/V): 178/178
Internal Player
Processor: Cortex-A17 1.8 GHz Quad-Core
System memory: 2.0 GB
Flash memory: 8 GB eMMC built-in
Video Format
Supported
H.264/AVC up to 1080p (1920 x 1080)
H.265/AVC up to 1080p (1920 x 1080)
MPEG-4 up to 1080p (1920 x 1080)
MPEG-2 up to 1080p (1920 x 1080)
MPEG-1 up to 1080p (1920 x 1080)
VC-1 up to 1080p (1920 x 1080)
Image Format
Supported
JPEG up to 1920 x 1080
PNG up to 1920 x 1080
Audio Format
Supported MP3 up to 320 Kbps
Open Standards
Supported
W3C HTML5 (HTML, JavaScript, CSS)
W3C SMIL 3.0 instructions (sub-set)
Interactivity GPIO via PIO-101 module (optional)
Technical Specication:

8
IAdea 22” Touch-Enabled Digital Meeting Room Door Sign Hardware
Copyright© 2018 IAdea all rights reserved
Connectivity
SD card slot (expendable to 64 GB)
Mini USB for ADB (Android Debug Bridge)
3.5 mm audio out
USB ports x 3
Ethernet port x 1
Power jack
Embedded wireless antenna
Built-in stereo speaker 2 W x 2
Supplied
Accessories Power adapter, power cord, IO bracket, quick guide
Optional
Accessories Adjustable table stand
Power
Requirement
Input: AC 100 - 240 V, 50 - 60 Hz, 1.5 A max
Output: 12 V / 3 A
UL/CB certied power supplies
Power
consumption 21 W
Environmental Operating temperature: 0 – 40 °C / 32 – 104 °F
Humidity: 10 – 85 % @ 45 °C / 113 °F non-condensing
Sytem Dimension 538 mm x 331 mm x 37 mm (21.18" x 13.03" x 1.46")
System Weight 3.6 kg (7.934 lbs)
Certications CE / FCC / RoHS
Warranty 1-year limited parts & labor (varies based on region,
contact sales for more details)

IAdea Headquarters
3F, No.21, Lane 168, Xiangshan Road
Taipei, Taiwan 114
Phone: [phone]
Fax: [phone]
Email: [email protected]
IAdea America Corp.
20 Fairbanks, suite 170
Irvine, CA 92618
USA
Phone: [phone]
Email: [email protected]