iamplus I.am.aware User manual

I.am.aware

•Bluetooth® License
This product contains ODID: B019784, ODID: B016770 and ODID: B017137
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Pebble Technology, Corp is under
license. Other trademarks and trade names are those of their respective owners
•CE Declaration of Conformity
We, ------------------------declare under our sole responsibility that the product ----------------------to which this declaration
relates is in conformity with the following standard(s) or other non-native document(s)
Article 3.1 a - Safety
Article 3.1 b - E MC
Article 3.2 - Radio
EN 60950-1: 2006
EN 301 489-01: V1.9.2
EN 301 489-17: V2.1.1
EN 300 328: V1.7.1
following the provisions of the R&TTE Directive (99/5/EC)
DATE:
TIME:

Introduction
I.am.aware lets you leave your phone at home and still remain connected. This android powered device lets you
do everything from making calls, listening to your music, displaying notifications such as text and multimedia
messages, setting calendar events and reminders, FacebookTM notifications, updates, tweets and much more.

Overview 1
2
3
Power Button
Display
Charge Port
1
2
3
4 SIM Tray
4

Quick Start Guide
What’s in the box
- One I.am.aware smart watch
- One I.am.aware USB charge cable
- One Bluetooth Headset
Turning on and off
-To turn on smartwatch, press and hold down the power button for 2 seconds
-To turn off the smartwatch when the display is active, press and hold down the power key and then
follow the on-screen instructions.
Charging I.am.aware
Attach the hooked charge connector to the charging pins at the base of the watch .Plug the other end
of the cable into a USB port on a computer, laptop or USB wall charger. It should take at least 3 hours to
obtain a full charge. Once fully charged, disconnect the charger by unhooking.
3
1

Bluetooth Pairing
Enable Bluetooth in watch settings. Perform a Bluetooth device scan. I.am.aware Bluetooth headset will show up
with the name “XXXX” where XXXX is a unique identifier (the last 4 digits of the serial number imprinted on the
back of the watch). After selecting the ‘Pair’ option, a confirmation prompt will be presented on the watch display.
Press the on screen prompt to confirm the pairing. The devices will then be paired.
Connecting to Mobile Network
Make sure your smartwatch is turned off. Use to SIM ejector PIN on the side of the watch to release the sim
tray and insert your nano sim card. Once properly inserted, slide the tray back into the slot until a soft click. The
smartwatch by default will connect to your mobile network. For data related queries please contact your network
provider. Please note that I.am.aware uses mobile network data or WiFi to use most of the applications.
WiFi Pairing
If setting up for the first time, you will be prompted to enter your WiFi network details. Once entered correctly you
will be able to connect to your WiFi. If left on for later, you can enable WiFi in watch settings. Perform a WiFi scan
and connect to your network.
Connecting to a computer
I.am.aware can be easily connected to a computer using the micro USB cable in order to sync your contacts,
music, calendar etc. To do so, you will require the Aware app (available for Mac, PC and Linux). Once installed on
your computer, you would be able to transfer all relevant files to your smart watch.
4

Using I.am.watch
Gestures and Navigation
The main view on the I.am.aware is the Clock screen. You can navigate from this screen to other screens including
applications using various gestures. Pinching on the clock screen will take you to the notifications page. Swiping left
on home screen will take you to your app list and Swiping right from any screen will take you the contextual app
menu.
PINCHING SWIPE LEFT SWIPE RIGHT

Application Screen
Applications you install on the Smart Watch are displayed as a list. Swipe left to launch the application screen. Just tap on the
name to open the associated application. The Application screen extends beyond the regular dimensions of the display, so
you may need to scroll down to see the remaining applications. Alternately, swipe right to close the app list.

Notification Screen
Notifications from all your apps show up here. Pinching on the home screen will take you to the notifications screen. The
notification screen is in the form of a 3d stack. When a notification arrives, a card with the notification type arrives on your
display. Such notifications include, for example, new text messages and Facebook™ updates.
To open the notification just tap on the card, which will then expand to show you the full notification. Swipe left to access
the contextual menu for that particular notification. Latest notifications are always displayed on the top of the stack.

Customising the display
To choose a clock type to be displayed
You can access various watch faces, timer, alarms etc. by swiping left from the main screen to open
the contextual menu. You can then choose from the different options.