iAT101 WiFi-PA1 Operating and safety instructions
Setup and Installation Guide
Mini WiFi Transceiver for Smartphone Surveillance System
with Motion-Detect Recording Function
www.peephole-store.com www.iat101.com
P1
WiFi Transceiver
Connecting to
• Home Door Camera
• Window Camera
• Mini SPY Camera
• And more….
The setup and installation guide for this mini portable WiFi Transceiver system is divide into following sections.
Table of contents: Page
1. Understand the Mini WiFi Transceiver (TXRX) ----------------------------- 3
• Basic Concept of a WiFi Transceiver ----------------------------- 4
• Diverse applications of an iat101 WiFi A/V transceiver ----------------------------- 5
a) Fixed Point WiFi Applications ----------------------------- 6 - 7
b) Portable WiFi Applications ----------------------------- 8
2. Software Installation on your phone ----------------------------- 9
3. Operation procedures for the WiFi Transceiver ----------------------------- 10
4. Modes of Operations ----------------------------- 11
5. Setup for iOS (iPhone) ----------------------------- 12
6. Setup for Android phone ---------------------------- 13
7. Other Setup information ----------------------------- 14 -20
8. For Client Mode operation ----------------------------- 21
9. Setup for PC and Broadcasting to social media network ----------------------------- 22 -23
10. Appendix
• After you changing the WiFi encryption ------------------------------ 24
• How to removing the host WiFi connection information
Setup and Installation Guide Outline
P2
In case there are any question, please email us
www.peephole-store.com www.iat101.com
1) SD card slot
2) USB interface
3) REC Button
4) WI-FI On/ Off Button
5) Power Button
6) Microphone
7) Red LED (Red/No SD Card)
8) Green LED (WI-FI / Client)
9) Blue LED (Power ON)
10 ) Analog Audio / Video In
P3
1. Understand the mini WiFi Transceiver (TXRX) with Recording Function
www.peephole-store.com www.iat101.com
6 7 8 9 10
5
4
3
2
1
WiFi Audio / Video
Transceiver
1cm
5.4 cm
Smallest Dimension in the world
The WiFi Transceiver (TXRX) is a device allowing you input analog A/V signal into the device ( ports 10) , and the WiFi
TXRX device will convert it into digital A/V and transmit the digital A/V signal from the built-in antenna into free space as a
wireless WiFi signal. This WiFi signal is going to link with the WiFi connection in your iPhone, iPad, Android Phone, or PC.
• This link is a WiFi peer to peer (P2P) Wi-Fi direct IP address connection using ad-hoc mode.
• This is not a WiFi device operated in infrastructure mode for internet connection applications
• This device is different from conventional analog RF wireless (2.4GH or 5.8GHz) A/V signal, the WiFi signal is secured
with password. Other people will not be able to use a receiver to steal your video / audio signal.
1) SD card slot
2) USB interface
3) REC Button
4) WI-FI On/ Off Button
5) Power Button
6) Microphone
7) Red LED (Red/No SD Card)
8) Green LED (WI-FI / Client)
9) Blue LED (Power ON)
10 ) Analog Audio / Video In
www.iat101.com www.peephole-store.com
P4
Basic Concept of a WiFi Transceiver (TXRX)
Diverse applications of an iat101 WiFi A/V Transceiver
Fixed Point WiFi Applications
Powered on using a wall plug
Portable WiFi Applications
Powered on using a battery
Compatible to most of iat101’s
Door Cameras, and Window Cameras home/
office surveillance products
Compatible to most of iat101’s
Mini SPY Cameras, Dental camera as a portable
surveillance products
www.peephole-store.com www.iat101.com
P5
8GB Micro SD card
iat101 WiFi TXRX
Connecting any analog surveillance camera video signal to the WiFi transceiver
Outdoor Camera Door Camera
Windo Camera
Note: For buying any door cameras, and window cameras, please visit our on-line shopping store
www.peephole-store.com
Video Signal in
DC po er in from a all plug
www.iat101.com www.peephole-store.com
Fixed Point WiFi Applications
Powered on using a wall plug
P6
WiFi signal to
smartphone, ipad, and PCs
Analog A/V input
from camera
www.iat101.com www.peephole-store.com
P7
Mini WiFi Transceiver
Analog Camera
Such as iat101’s door camera,
and indo camera products
12 V DC
Po er Supply
Typical wire connection diagram for a Fixed Point WiFi Surveillance
Fixed Point WiFi Applications
Powered on using a wall plug
Mini Window Camera WiFi Surveillance Applications
www.iat101.com www.peephole-store.com
P8
WiFi signal to
smartphone, ipad,
Mini WiFi Transceiver
Our indo camera products ould be ready for sale soon!
.ia-tecs.com/do nload/iat101_Windo _Camera.pdf
Door Camera
Windo Camera
Windo Cameras
Door Camera
Placing our window camera and door camera products
to protect your lovely home and amily members
www.iat101.com www.peephole-store.com
Our indo camera products ould be ready for sale soon!
.ia-tecs.com/do nload/iat101_Windo _Camera.pdf
a.) Install APPs software: Software download, please go to
• Google Play ( for Android)
• APP Store (for iSO)
to install “SecurePro plus” software ,after download and the icon should shown in your apps list.
b.) Power on WiFi transmitter and Turn on your Smartphone Wi-Fi setting,
Search and Select SSID: WF-DV-LT1-xxxxxxxxxxxxx, and then
input password: 12345678
(Default SSID: WF-DV-LT1xxxxxxxxxxxxx / Password: 12345678)
c.) Barcode Scanning: After establishing the WiFi connection, and then click into get into device list
window. For the first time user, please click into + sign on the left bottom corner and a bar code scanner
window will appear. Please scan the barcode attached on the WiFi transmitter. After a successful bar code
scanning, the SSID will shown in the device list.
d.) Click device in the device list window, and input password one more time to link
(Default Password: 12345678)
And then you should be able to the video shown on your Smartphone / Tablet. You may change Wi-Fi
password, video settings, etc. (check Note1)
Note 1: If you want to change the default password to your own password, you must write down and
remember your own password and don’t forget it. There is no way to reset password, if you forgot your
password.
2. Software Installation on a Smart Phone ( iPhone & Android Phone )
P9 www.iat101.com www.peephole-store.com
3. Operation procedures for the WiFi Transceiver
1) SD card slot
2) USB interface
3) REC Button
4) WI-FI On/ Off Button
5) Power Button
6) Microphone
7) Red LED (Red/No SD Card)
8) Green LED (WI-FI / Client)
9) Blue LED (Power ON)
10 ) Analog Audio / Video In
Before the operation procedures , please make sure the A/V signal is plug into (10) A/V input slot.
1.) Insert the Micro SD card into (1):
Place the SD Card into SD Card Slot, Press again for take out the SD Card.
2.) Plug in the Micro USB 5 V (DC) power supply to (2)
3.) Power On: Press button (5) of the device. Press again for powering off.
Note: The default setting of the device as you power it on, its WiFi would be turn on and start recording.
4.) Wi-Fi On/Off: Press button (4) to turn on or turn off WiFi
5.) REC On/Off: Press button (3) to turn on or stop Recording.
6.) WiFi Direct / Wi-Fi Client Switch: Press button (4) for 3 sec. to switch the operational mode between
WiFi- Direct or Wi-Fi Client mode. (please check next page for client mode information)
7.) Rest Wi-Fi to default: Hold the button (4) for 10 sec.
LED light indications on the device:
1.) Blue LED Light On：Power On
2.) Red LED Light On：Please check the SD card. (Check the memory card)
Red LED Light Blinking：Recording
3) Green LED Light On：WI-FI On
Green LED Light Blinking：WI-FI Direct / WI-FI Client connecting
Green LED Light Continue Blink 2 times and stop one sec.：Enter Client, But no connection.
www.iat101.com www.peephole-store.com
P10
There are 2 modes of operation can be used for the WiFi A/V transceiver which including WiFi Direct mode, and WiFi Client mode.
1.) WiFi Direct mode is a smartphone’s WiFi connecting to the WiFi video transceiver for local area WiFi connection.
2.) WiFi Client mode is set the WiFi A/V transceiver linking to a WiFi AP router or a smartphone as a portable WiFi hot spot. (The smartphone
needs enabling its 3G/ 4G or 4.5G wireless transmission).
The WiFi AP or the hot-spot smartphone would be linked in between your smartphone and the WiFi video transceiver for remote location
surveillance when you are traveling in other city of the world with a good internet service or 3g/ 4G/ 4.5G phone connection.
The advantages of the WiFi Client mode are:
• You may attach the WiFi transceiver to a WiFi router or AP’s SSID, and then no one else will see your WiFi transceiver SSID.
• The remote operation of the Client mode is not relying on an iCloud service for viewing your video. It is a policy-graded surveillance device
with an ultra-high secured video signal transmission algorithm which is not easy to be decoded by any other professional spy equipment.
Router / AP
4. Modes of Operation
www.iat101.com www.peephole-store.com
P11
Please make sure, you do press button (4) for 3 sec. to switch the operational mode between WiFi- Direct or Wi-Fi Client mode.
WiFi Direct Mode ( or Local Area WiFi network)
WiFi Client Mode
Or
3G, 4G , 4.5G
Wireless
For remote location video viewing, please make sure having a stable internet connection or 3G/4G/ 4.5G phone signal.
This smart phone No.2 has to be set as a WiFi hot spot
and also need to enable its 3G/ 4G or 4.5 G phone
connection
or
3G, 4G. 4.5G
Wireless
Phone No.1
Phone No.1
Phone No.2
Without a good internet service or stable 3G, 4G,
4.5G phone service, the remote video service
maybe paused or stopped. For example, if you are
in a mountain area that can only receiving 2G
phone signal, you ill not be able to get the remote
video signal.
Home In other city
*The default setting is WI-FI direct connect mode, to set the WI-FI Client mode, please enter the direct
connection mode first.
After establishing the direct mode and be able to view the video under the direct mode, and then you
switch to client mode to connecting to a WiFi router or a smartphone (set as a hot-spot), after enter the
correct AP name and password, and then switch to the WI-FI client mode.
*When the device switch to Client Mode, please make sure it is under signal of AP to avoid the disconnect
Basic Steps for set up client mode
www.iat101.com www.peephole-store.com
1)Choose settings
2)Choose Wi-Fi.
3)Choosing the host’s Wi-Fi hich you need to connect.
4)Enter pass ord. (The factory initial pass ord is 123456878)
5)Confirm WI-FI has been connected.
6.)Enter WI-FI connection.
Before the setup, please make sure you download the software as described in page 9
5. For iOS phone setup for iPhone
P12
After finish setup please go to page 14
www.iat101.com www.peephole-store.com
DV-LT1-XXXXXXXXXX
6. For Android Phone Setup
Before the setup, please make sure you download the software as described in page 9
1) Start APP.
2) Choose the WiFi device.
3) Enter password. (The factory password is 123456878.)
4) Click WiFi Connect
5.) Enter WI-FI connection.
Note: Different smartphone may has different operational display screen
P13
After finish setup please go to page 14
www.iat101.com www.peephole-store.com
DV-LT1-XXXXXXXXXX
DV-LT1-
XXXXXXXXXX
DV-LT1-
XXXXXXXXXX
1)Back to WI-FI device list.
2)Cell phone video and Photo archive folder.
3)SD card video host and Photo archive folder.
4)Setting.
5)Quick setting.
6)Host SD card resolution hen recording.
7)SD card reminder.
8)Motion detection recording.
9)Resolution hen recording.
10)Host SD card recording icon.
11)Host SD card recording.
12)Host SD card photograph.
13)Smartphone recording icon.
14)Smartphone recording.
15)Smartphone photograph.
16)Host SD card recording button.
17)Smartphone recording button
1)Host SD card red light constant lighting
hen recording.
2)Smartphone recording red light blinking.
1)Film archives.
2)Photographic archives.
3)Film and photo all archive.
4)Mark archive hat you need.
5)File name.
6)Mark all archive.
7)Unmark all archive.
8)Back to homepage.
9)Play button.
10)Delete button.
1)Video playback indo .
2)Back to last page.
3)Pause button.
Functional Buttons
Browsing mobile video /photo archive in ormation Play video ile
P14
Recording
www.iat101.com www.peephole-store.com
7. Other Setup Information
1)Film archives.
2)Photographic archives.
3)Film and photo all archive.
4)Continuous video file named beginning ith Rec.
5)Motion detection recording named beginning /MRec.
6)Mark archive hat you need.
7)File name.
8)Mark all archive.
9)Unmark all archive.
10)Back to homepage.
11)Do nload archive of SD card to smartphone.
12)Play button.
13)Delete button.
1)WI-FI setting.
2)Privacy setting. (After s itch privacy setting,
entry APP and enter pass ord.)
3)Video setting.
4)Date and time setting.
5)System information.
6)Reset all setting.
7)Firm are upgrade.
8)Back to homepage.
Browsing the host SD card video /
photo archive in ormation
Setting
P15 www.iat101.com www.peephole-store.com
*Click SecurePro APP, go into the WI-FI device list which you need to connect, and select 2 (you don’t need to connect to the
host Wi-Fi), and then you can view previous saved video files. Photo files were downloaded to the mobile video, and you can view
Photo archive files.
1)Last connected Wi-Fi host.
2)Bro sing files icon.
1)Wi-Fi host name.
2)Wi-Fi pass ord.
3)Way of encryption.
4)Set WI-FI SSID invisible or not.
5)Back to homepage.
6)Back to last page.
1)Way of encryption.
2)Visible.
3)WEP encrypt(64bit)：
Original password 12345.
4)WPA/WPA2/PSK encrypt(128bit)：
Original password 12345678.
Please also read Appendix 1 a ter you
changed the WiFi encryption
WiFi Direct: WI-FI setting
P16
Encryption
www.iat101.com www.peephole-store.com
1) WI-FI OFF
2) When the phone stops ith the host connection, the host does not close the WI-FI
3) When the phone stops up to 1 minute to connect ith the host, the host close WI-FI.
4) When the phone stops up to 3 minutes to connect ith the host, the host close WI-FI.
5) When the phone stops up to 5 minutes to connect ith the host, the host close WI-FI.
* When the host is do n WI-FI, required from the host operating
WI-FI OFF Setting
P17 www.iat101.com www.peephole-store.com
Table of contents
