IBASE Technology 15923 User manual

Item code: 15923 Product name: IBase
Instruction Manual
IBase is a wireless alarm system with pre-determined ID and remote reporting function. The ID
will be shown on 15901R, Remote Receiver. The ID number can also be shown on the side, front
or at the back of the IBase as desired.
There are three sensors: (1) micro-switch, (2) motion and (3) optical.
Operation
The IBase must lie on a flat surface.
The micro-switch at the back of the IBase is the master key. The battery will come to live when
the micro-switch is depressed but is not activated. See figure 1
The IBase will activate when an item is put on the motion plate (black area after the protective
sheet is peeled off). See figure 2
Two beeps indicate that only the motion sensor is activated.
Three beeps mean both motion and optical sensors are activated.
If optical sensor is not required, simply put a black tape over the optical sensor.
The accessory is used for attaching the base of a transparent or light colour item so that the
optical sensor will not activate accidentally, for example, on a bottle of whisky. See figure 3
Figure 1: Base
Factory label
with
manufacturing
date
Quarterly
Inspection
table
Micro
-
switch

Figure 2: Top
Figure 3: Accessory
Alarm activation/deactivation
When an alarm is activated, the Red LED will flash.
Use EG-RC600 Remote Resetter to deactivate.
Battery Changing
Simply remove the screws at the base of the IBase to change battery.
Check battery power by activating the alarm. When alarm sounds or Red LED diminishes,
replace battery.
Note
The IBase is not 100% fool proof. It minimizes foul play by the use of both motion and optical
sensors.
We will make available two more sizes, one larger and one smaller.
For your demo purposes, please feel free to remove the labels at the back of the IBase.
Optical
Sensor
Buzzer
Re
d ED
ligh
Protective
sheet
to be removed
before use.
Motion plate
sensor.
Dummy
buzzer
Self adhesive tape
for fixing to the
bottom of an article
To be positioned
over the optical
sensor