IBM System x3250 User manual

IBMSystemx3250M3Types4251,4252,and4261
Installation and User’s Guide


IBMSystemx3250M3Types4251,4252,and4261
Installation and User’s Guide


Note: Before using this information and the product it supports, read the general information in Appendix B, “Notices,” on page 77
and the IBM Safety Information,IBM Environmental Notices and User's Guide on the IBM System x Documentation CD, and the
Warranty Information document that comes with the server.
Sixth Edition (August 2011)
© Copyright IBM Corporation 2011.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.

Contents
Safety ............................vii
Chapter 1. The System x3250 M3 server ...............1
The IBM System x Documentation CD.................3
Hardware and software requirements ................3
Using the Documentation Browser .................3
Related documentation ......................4
Notices and statements in this document................5
Features and specifications.....................6
What your server offers ......................8
Reliability, availability, and serviceability ................11
IBM Systems Director ......................12
The UpdateXpress System Packs ..................13
Server controls, LEDs, and power ..................13
Front view .........................13
Rear view ..........................15
Server power features .....................16
Chapter 2. Installing optional devices................19
Instructions for IBM Business Partners ................19
Server components .......................20
System-board internal connectors .................21
System-board external connectors.................22
System-board switches and jumpers ................23
System-board LEDs ......................25
System-board optional-device connectors ..............26
Installation guidelines ......................27
System reliability guidelines ...................28
Working inside the server with the power on .............28
Handling static-sensitive devices .................29
Removing the cover .......................29
Installing a memory module ....................30
Unbuffered DIMMs (UDIMMs) ..................31
Registered DIMMs (RDIMMs) ..................33
Installing drives.........................35
Installing a simple-swap Serial ATA hard disk drive...........36
Installing a hot-swap hard disk drive ................37
IDs for hot-swap hard disk drives .................39
Installing an optional DVD drive..................39
Replacing a PCI riser-card assembly .................41
Installing an adapter .......................42
Replacing an IBM ServeRAID-BR10il SAS/SATA Controller v2 .......45
Installing an optional IBM ServeRAID-MR10i SAS/SATA Controller ......47
Installing the optional IBM ServeRAID-MR10is VAULT SAS/SATA controller 50
Installing the virtual media key ...................53
Installing a USB embedded hypervisor flash device ...........54
Completing the installation.....................54
Replacing the DIMM air baffle ..................54
Replacing the cover ......................55
Connecting the cables .....................56
Updating the server configuration .................56
Chapter 3. Configuring the server .................57
© Copyright IBM Corp. 2011 iii

Using the Setup utility ......................58
Starting the Setup utility ....................58
Setup utility menu choices....................58
Passwords .........................62
Using the Boot Manager program ..................63
Starting the backup server firmware .................64
Using the ServerGuide Setup and Installation CD ............64
ServerGuide features .....................65
Setup and configuration overview .................65
Typical operating-system installation ................65
Installing your operating system without using ServerGuide .......66
Using the integrated management module ...............66
Using the embedded hypervisor ..................67
Using the remote presence capability and blue-screen capture .......68
Enabling the remote presence feature ...............69
Obtaining the IP address for the IMM................69
Logging on to the Web interface .................69
Enabling the Intel Gigabit Ethernet Utility program ............70
Configuring the Gigabit Ethernet controller ...............70
Enabling and configuring Serial over LAN (SOL) ............70
UEFI update and configuration ..................70
Using the LSI Configuration Utility program ..............71
Starting the LSI Configuration Utility program .............72
Formatting a hard disk drive ...................73
Creating a RAID array of hard disk drives ..............73
IBM Advanced Settings Utility program ................73
Updating IBM Systems Director ...................74
Appendix A. Getting help and technical assistance ..........75
Before you call .........................75
Using the documentation .....................75
Getting help and information from the World Wide Web ..........75
Software service and support ...................76
Hardware service and support ...................76
IBM Taiwan product service ....................76
Appendix B. Notices ......................77
Trademarks ..........................77
Important notes.........................78
Particulate contamination .....................79
Documentation format ......................79
Electronic emission notices ....................80
Federal Communications Commission (FCC) statement .........80
Industry Canada Class A emission compliance statement ........80
Avis de conformité à la réglementation d'Industrie Canada ........80
Australia and New Zealand Class A statement ............80
European Union EMC Directive conformance statement .........81
Germany Class A statement ...................81
VCCI Class A statement ....................82
Japan Electronics and Information Technology Industries Association (JEITA)
statement .........................82
Korean Class A warning statement ................82
Russia Electromagnetic Interference (EMI) Class A statement.......83
People's Republic of China Class A electronic emission statement .....83
Taiwan Class A compliance statement ...............83
iv IBM System x3250 M3 Types 4251, 4252, and 4261: Installation and User’s Guide

Index ............................85
Contents v

vi IBM System x3250 M3 Types 4251, 4252, and 4261: Installation and User’s Guide

Safety
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.
Avant d'installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.
Antes de instalar este produto, leia as Informações sobre Segurança.
Antes de instalar este producto, lea la información de seguridad.
Läs säkerhetsinformationen innan du installerar den här produkten.
© Copyright IBM Corp. 2011 vii

Important:
Each caution and danger statement in this documentation is labeled
with a number. This number is used to cross reference an English
language caution or danger statement with translated versions of the
caution or danger statement in the Safety Information document.
For example, if a caution statement is labeled "Statement 1,"
translations for that caution statement are in the Safety Information
document under "Statement 1."
Be sure to read all caution and danger statements in this document
before you perform the procedures. Read any additional safety
information that comes with the server or optional device before you
install the device.
viii IBM System x3250 M3 Types 4251, 4252, and 4261: Installation and User’s Guide

Attention: Use No. 26 AWG or larger UL-listed or CSA certified
telecommunication line cord.
Statement 1:
DANGER
Electrical current from power, telephone, and communication cables is
hazardous.
To avoid a shock hazard:
vDo not connect or disconnect any cables or perform installation,
maintenance, or reconfiguration of this product during an electrical
storm.
vConnect all power cords to a properly wired and grounded electrical
outlet.
vConnect to properly wired outlets any equipment that will be attached to
this product.
vWhen possible, use one hand only to connect or disconnect signal
cables.
vNever turn on any equipment when there is evidence of fire, water, or
structural damage.
vDisconnect the attached power cords, telecommunications systems,
networks, and modems before you open the device covers, unless
instructed otherwise in the installation and configuration procedures.
vConnect and disconnect cables as described in the following table when
installing, moving, or opening covers on this product or attached
devices.
To Connect: To Disconnect:
1. Turn everything OFF.
2. First, attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
Safety ix

Statement 2:
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has
a module containing a lithium battery, replace it only with the same module
type made by the same manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
vThrow or immerse into water
vHeat to more than 100°C (212°F)
vRepair or disassemble
Dispose of the battery as required by local ordinances or regulations.
xIBM System x3250 M3 Types 4251, 4252, and 4261: Installation and User’s Guide

Statement 3:
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
vDo not remove the covers. Removing the covers of the laser product could
result in exposure to hazardous laser radiation. There are no serviceable
parts inside the device.
vUse of controls or adjustments or performance of procedures other than
those specified herein might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.
Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
Appareil A Laser de Classe 1
`
Safety xi

Statement 4:
≥18 kg (39.7 lb.) ≥32 kg (70.5 lb.) ≥55 kg (121.2 lb.)
CAUTION:
Use safe practices when lifting.
Statement 5:
CAUTION:
The power control button on the device and the power switch on the power
supply do not turn off the electrical current supplied to the device. The device
also might have more than one power cord. To remove all electrical current
from the device, ensure that all power cords are disconnected from the power
source.
1
2
xii IBM System x3250 M3 Types 4251, 4252, and 4261: Installation and User’s Guide

Statement 6:
CAUTION:
Do not place any objects on top of a rack-mounted device unless that
rack-mounted device is intended for use as a shelf.
Statement 8:
CAUTION:
Never remove the cover on a power supply or any part that has the following
label attached.
Hazardous voltage, current, and energy levels are present inside any
component that has this label attached. There are no serviceable parts inside
these components. If you suspect a problem with one of these parts, contact
a service technician.
Statement 12:
CAUTION:
The following label indicates a hot surface nearby.
Safety xiii

Statement 26:
CAUTION:
Do not place any object on top of rack-mounted devices.
This server is suitable for use on an IT power-distribution system whose maximum
phase-to-phase voltage is 240 V under any distribution fault condition.
Statement 27:
CAUTION:
Hazardous moving parts are nearby.
xiv IBM System x3250 M3 Types 4251, 4252, and 4261: Installation and User’s Guide

Chapter 1. The System x3250 M3 server
This Installation and User's Guide contains information and instructions for setting
up your IBM System x3250 M3 Type 4251, 4252, or 4261 server, instructions for
installing some optional devices, and instructions for cabling, and configuring the
server. For removing and installing optional devices, diagnostics and
troubleshooting information, see the Problem Determination and Service Guide on
the IBM System x Documentation CD, which comes with the server.
The IBM®System x3250 M3 Type 4251, 4252, or 4261 server is a 1U-high1rack
model server for high-volume network transaction processing. This
high-performance, dual-core or quad-core server is ideally suited for networking
environments that require superior microprocessor performance, input/output (I/O)
flexibility, and high manageability.
Performance, ease of use, reliability, and expansion capabilities were key
considerations in the design of the server. These design features make it possible
for you to customize the system hardware to meet your needs today and provide
flexible expansion capabilities for the future.
The server comes with a limited warranty. For information about the terms of the
warranty and getting service and assistance, see the printed Warranty Information
document that comes with your server.
The server contains IBM X-Architecture®technologies, which help increase
performance and reliability. For more information, see “What your server offers” on
page 8 and “Reliability, availability, and serviceability” on page 11.
You can obtain up-to-date information about the server and other IBM server
products at http://www.ibm.com/systems/x/. At http://www.ibm.com/support/
mysupport/, you can create a personalized support page by identifying IBM
products that are of interest to you. From this personalized page, you can subscribe
to weekly e-mail notifications about new technical documents, search for information
and downloads, and access various administrative services.
If you participate in the IBM client reference program, you can share information
about your use of technology, best practices, and innovative solutions; build a
professional network; and gain visibility for your business. For more information
about the IBM client reference program, see http://www.ibm.com/ibm/
clientreference/.
The server supports two 3.5-inch simple-swap SATA hard disk drives, two 3.5-inch
hot-swap SATA or SAS hard disk drives, or four 2.5-inch hot-swap SAS hard disk
drives (depending on your model).
Note:
vSimple-swap SATA hard disk drives support AHCI mode.
vSimple-swap models only support ServeRAID-BR10il adapter.
Note: The illustrations in this document might differ slightly from your hardware.
The following illustration shows the 2.5-inch hot-swap SAS server model.
1. Racks are marked in vertical increments of 1.75 inches each. Each increment is referred to as a unit, or a “U”. A 1U-high device is
approximately 1.75 inches tall.
© Copyright IBM Corp. 2011 1

Power-on LED
Power-control button
Reset button
Hard disk drive activity LED
Locator LED
System-error LED
USB 1 connector
USB 2 connector
Hard disk drive status
LED (amber)
Hard disk drive activity
LED (green)
The following illustration shows the 3.5-inch hot-swap SAS/SATA server model.
Power-on LED
Power-control button
Reset button
Hard disk drive activity LED
Locator LED
System-error LED
USB 1 connector
USB 2 connector Hard disk drive status
LED (amber)
Hard disk drive activity
LED (green)
The following illustration shows the 3.5-inch simple-swap SATA server model.
Power-on LED
Power-control button
Reset button
Hard disk drive activity LED
Locator LED
System-error LED
USB 1 connector
USB 2 connector
If firmware and documentation updates are available, you can download them from
the IBM Web site. The server might have features that are not described in the
documentation that comes with the server, and the documentation might be updated
occasionally to include information about those features, or technical updates might
be available to provide additional information that is not included in the server
documentation. To check for updates, complete the following steps.
Note: Changes are made periodically to the IBM Web site. Procedures for locating
firmware and documentation might vary slightly from what is described in this
document.
1. Go to http://www.ibm.com/systems/support/.
2. Under Product support, click System x.
3. Under Popular links, click Software and device drivers for firmware updates,
or click Publications lookup for documentation updates.
2IBM System x3250 M3 Types 4251, 4252, and 4261: Installation and User’s Guide

Record information about the server in the following table.
Product name IBM System x3250 M3 server
Machine type 4251, 4252, or 4261 (circle the machine type that applies)
Model number _____________________________________________
Serial number _____________________________________________
The model number and serial number are on the ID label on the front of the server.
ID label
Note: The illustrations in this document might differ slightly from your hardware.
You can download an IBM ServerGuide Setup and Installation CD to help you
configure the hardware, install device drivers, and install the operating system.
For a list of supported optional devices for the server, see http://www.ibm.com/
servers/eserver/serverproven/compat/us/.
See the Rack Installation Instructions document on the IBM System x
Documentation CD for complete rack installation and removal instructions.
The IBM System x Documentation CD
The IBM System x Documentation CD contains documentation for the server in
Portable Document Format (PDF) and includes the IBM Documentation Browser to
help you find information quickly.
Hardware and software requirements
The IBM System x Documentation CD requires the following minimum hardware
and software:
vMicrosoft Windows XP, Windows 2000, or Red Hat Linux
v100 MHz microprocessor
v32 MB of RAM
vAdobe Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating
systems
Using the Documentation Browser
Use the Documentation Browser to browse the contents of the CD, read brief
descriptions of the documents, and view documents, using Adobe Acrobat Reader
or xpdf. The Documentation Browser automatically detects the regional settings in
use in your server and displays the documents in the language for that region (if
available). If a document is not available in the language for that region, the
English-language version is displayed.
Chapter 1. The System x3250 M3 server 3

Use one of the following procedures to start the Documentation Browser:
vIf Autostart is enabled, insert the CD into the CD or DVD drive. The
Documentation Browser starts automatically.
vIf Autostart is disabled or is not enabled for all users, use one of the following
procedures:
– If you are using a Windows operating system, insert the CD into the CD or
DVD drive and click Start -> Run.IntheOpen field, type
e:\win32.bat
where eis the drive letter of the CD or DVD drive, and click OK.
– If you are using Red Hat Linux, insert the CD into the CD or DVD drive; then,
run the following command from the /mnt/cdrom directory:
sh runlinux.sh
Select the server from the Product menu. The Available Topics list displays all the
documents for the server. Some documents might be in folders. A plus sign (+)
indicates each folder or document that has additional documents under it. Click the
plus sign to display the additional documents.
When you select a document, a description of the document is displayed under
Topic Description. To select more than one document, press and hold the Ctrl key
while you select the documents. Click View Book to view the selected document or
documents in Acrobat Reader or xpdf. If you selected more than one document, all
the selected documents are opened in Acrobat Reader or xpdf.
To search all the documents, type a word or word string in the Search field and
click Search. The documents in which the word or word string appears are listed in
order of the most occurrences. Click a document to view it, and press Crtl+F to use
the Acrobat search function, or press Alt+F to use the xpdf search function within
the document.
Click Help for detailed information about using the Documentation Browser.
Related documentation
This Installation and User’s Guide contains general information about the server
including how to set up and cabling the server, how to install supported optional
devices, and how to configure the server. The following documentation also comes
with the server:
vProblem Determination and Service Guide
This document is in PDF on the IBM System x Documentation CD. It contains
information to help you solve problems yourself, and it contains information for
service technicians.
vWarranty Information
This printed document contains information about the terms of the warranty.
vRack Installation Instructions
This printed document contains instructions for installing the server in a rack and
comes with the rack kit.
vIBM Environmental Notices and User Guide
This document is in PDF format on the IBM System x Documentation CD. It
contains translated environmental notices.
vSafety Information
4IBM System x3250 M3 Types 4251, 4252, and 4261: Installation and User’s Guide