IBM 7212 Model 102 User manual

Hardware Announcement
October 4, 2005
IBM 7212 Model 102 adds Half-High LTO Tape
Drive for IBM pSeries and iSeries

Overview
The IBM 7212 Model 102
TotalStorageStorage Device
Enclosure adds the 200/400 GB
Half-High LTO Ultrium 2 Tape Drive
feature that is:
•Designed to provide physical
storage capacity of 200 GB
(400 GB with 2:1 compression)
per Ultrium 2 data cartridge and
sustained data rate of up to
24 MB per second, 48 MB per
second at 2:1 compression
•Read and write compatible with
Ultrium 1 100 GB data cartridge
at up to 16 MB per second,
200 GB physical capacity at up to
32 MB per second, with 2:1
compression
•Supported by most models of the
IBM pSeriesand IBM
iSeriesfamilies of
servers
Additionally, the iSeries and i5
servers also support the following,
previously announced, 7212
Model 102 features: VXA-2 Tape
Drive, DAT72 Tape Drive, SLR60
Tape Drive, SLR100 Tape Drive,
DVD-ROM Drive, and DVD-RAM 2
Drive.
Key prerequisites
Refer to the Description section.
Planned availability date
October 14, 2005
At a glance
The Half-High LTO-2 Tape Drive
feature for the IBM 7212
Model 102 is designed to offer
excellent flexibility, capacity, and
function. It is designed to provide
up to 200 GB of physical storage
capacity and up to 24 MB per
second transfer rate (twice that
with 2:1 compression).
For ordering, contact:
Your IBM representative, an IBM Business
Partner, or the Americas Call Centers at
800-IBM-CALL Reference: YE001
This announcement is provided for your information only. For additional information, contact your IBM representative,
call 800-IBM-4YOU, or visit the IBM home page at: http://www.ibm.com.
IBM United States IBM is a registered trademark of International Business Machines Corporation. 105-397

Description
The IBM 7212 Model 102 is designed to provide efficient
and convenient storage expansion capabilities for
selected pSeries and iSeries servers.
The two bays of the 7212 Model 102 can accommodate
any two of the following for pSeries and p5 servers:
•DDS-4 Tape Drive
•DAT72 (DDS Gen5) Tape Drive
•VXA-2 Tape Drive
•40X CD-ROM Drive
•DVD-RAM Drive
•DVD-RAM 2 Drive
•DVD-ROM Drive
•SLR60 Tape Drive
•SLR100 Tape Drive
•200/400 GB Half-High LTO Ultrium 2 Tape Drive (new)
The two bays of the 7212 Model 102 can accommodate
any two of the following for iSeries and i5 servers:
•VXA-2 Tape Drive
•DVD-RAM 2 Drive
•DVD-ROM Drive
•SLR60 Tape Drive
•SLR100 Tape Drive
•200/400 GB Half-High LTO Ultrium 2 Tape Drive (new)
Refer to the Sales Manual for descriptions of the
previously announced drive features.
200/400 GB Half-High LTO Ultrium 2 Tape Drive
The Half-High LTO-2 Tape Drive is designed to provide
an Ultrium 2 media physical capacity of up to 200 GB
(400 GB with 2:1 compression) data storage per cartridge
and a sustained data transfer rate of up to 24.0 MB per
second (48 MB per second with 2:1 compression). In
addition to reading and writing on Ultrium 2 tape
cartridges, it is also read and write compatible with
Ultrium 1 cartridge. The Half-High LTO-2 Tape Drive can
be a cost-effective solution for save, restore, and archive
functions.
Key prerequisites
pSeries and p5 server support for these features is
limited to servers that support SCSI adapters, feature
numbers 1974 and 1975 (p5 server), 6203, 6205, 6206,
5703, 5710, 5711, 5712, Integrated Ultra2 SCSI Adapter,
and Integrated Ultra3 SCSI Adapter. The software level
must be AIXV5.1.0 with update CD LCD4-1103-07, or
later, or Linux, as listed at the end of this section.
iSeries and i5 server support for 7212 Model 102 is
limited to servers that support adapter feature numbers
2768, 5702, 5703, 5705, and 5712, and with OS/400V5.2,
or later, or Linux as listed at the end of this section.
i5 servers require IBM i5/OSV5.3, or later, or Linux as
listed at the end of this section.
Linux support:
•SUSE LINUX Enterprise Server 9 for POWER
•Red Hat Enterprise LINUX AS for POWER V3
Product positioning
New pSeries and iSeries server models require the IBM
7212 TotalStorage Storage Device Enclosure Model 102
for support of save, restore, and archival functions. The
7212 Model 102 fits conveniently in a 1U space of a
19-inch rack and accommodates any two of a number of
various tape and optical drive features. The 7212
Model 102 may also be installed on a desktop.
If you need to back up larger amounts of data or need
higher performance tape drives, consider the following:
•IBM 7206 Model VX2 Tape Drive with VXA Technology
•IBM TotalStorage Ultrium Tape Drive 3580
•IBM 7332 Model 220 4mm Tape Autoloader
•IBM 7212 Model 312 VXA Tape Autoloader
•IBM TotalStorage Ultrium Tape Autoloader 3581
•IBM TotalStorage UltraScalable Tape Library 3584
Business Partner information
If you are a Direct Reseller - System Reseller acquiring
products from IBM, you may link directly to Business
Partner information for this announcement. A
PartnerWorld ID and password are required (use IBM ID).
BP Attachment for Announcement Letter 105-397
https://www.ibm.com/partnerworld/
mem/sla.jsp?num=105-397
Trademarks
iSeries, i5/OS, and POWER are trademarks of International
Business Machines Corporation in the United States or other
countries or both.
The e-business logo, TotalStorage, pSeries, AIX, and OS/400
are registered trademarks of International Business
Machines Corporation in the United States or other countries
or both.
Linux is a trademark of Linus Torvalds in the United States,
other countries or both
Other company, product, and service names may be
trademarks or service marks of others.
105-397 -2-

IBM US
Announcement
Supplemental Information
October 4, 2005
Publications
The following publications are shipped with the product.
Additional copies are available. To order, contact your
IBM representative.
Order
Title number
7212 Model 102 Storage Device Enclosure SA41-0054
Setup and Operator Guide
External Devices Safety Information SA26-2004
7212 Model 102 Storage Device Enclosure SY44-0084
Service Guide
The following publications are available. To order,
contact your IBM representative.
Order
Title number
7212 Model 102 Storage Device Enclosure SA41-0054
Setup and Operator Guide
External Devices Safety Information SA26-2004
7212 Model 102 Storage Device Enclosure SY44-0084
Service Guide
The Publication Notification System (PNS) is available by
order number/product number. Customers currently
subscribing to PNS will automatically receive notifications
by e-mail. Customers who wish to subscribe, can visit the
PNS Web site location at
http://www.elink.ibmlink.ibm.com/public/
applications/publications/cgibin/pbi.cgi
The publications listed on the notification can be ordered
by calling the Pubs Support Group in Raleigh at
800-879-2755, option 1. The IBM Publications Center
Portal
http://www.elink.ibmlink.ibm.com/public/
applications/publications/cgibin/pbi.cgi
The Publications Center is a worldwide central repository
for IBM product publications and marketing material with
a catalog of 70,000 items. Extensive search facilities are
provided, as well as payment options via credit card.
Furthermore, a large number of publications are available
online in various file formats, which can currently be
downloaded free of charge.
Note that PNS subscribers most often order their
publications via the Publication Center.
Services
Integrated Technology Services
IBM services include business consulting, outsourcing,
hosting services, applications, and other technology
management.
These services help you learn about, plan, install,
manage, or optimize your IT infrastructure to be an on
demand business. They can help you integrate your
high-speed networks, storage systems, application
servers, wireless protocols, and an array of platforms,
middleware, and communications software for IBM and
many non-IBM offerings. IBM is your one-stop shop for
IT support needs.
For details on available services, contact your IBM
representative or visit
http://www.ibm.com/services/
For details on available IBM Business Continuity and
Recovery Services, contact your IBM representative or
visit
http://www.ibm.com/services/continuity
For details on education offerings related to specific
products, visit
http://www.ibm.com/services/learning/index.html
Select your country, and then select the product as the
category.
Technical information
Specified operating environment
Physical specifications
7212 Model 102
•Width: 428 mm (16.85 in)
•Depth: 483 mm (19.0 in)
•Height: 44 mm (1.72 in)
•Weight: 8.3 kg (18.2 lb)
Note: The weight listed is the maximum weight with two
feature numbers 1100 installed. Other combinations of
devices and blank panels will result in less weight.
To check installability and serviceability in non-IBM
industry standard racks, review the installation planning
information for any product specific installation
requirements.
Operating environment
•Temperature: 16° to 32°C (60° to 90°F)
This announcement is provided for your information only. For additional information, contact your IBM representative,
call 800-IBM-4YOU, or visit the IBM home page at: http://www.ibm.com.
IBM United States IBM is a registered trademark of International Business Machines Corporation. 105-397

•Relative humidity: 20 to 80 percent (non-condensing),
23°C (73°F) wet bulb operating
•Electrical voltage: 100 to 127 or 200 to 240 V ac, 50-60
Hz, Autoranging
•Electrical power: 0.047 kVA
•Noise level: 5.3 bels idle, 5.5 bels operating dBa
• Leakage and starting current: 3.5 mA at 240
V ac/50 Hz
•Inrush current: 60 amperes peak (a ten amp fuse is
sufficient for overload protection)
Note: Values shown are the maximum levels with two
feature numbers 1100 installed. Other combinations of
drive or panel features result in lower values.
Hardware requirements: The Half-High LTO-2 Tape Drive
(#1109) may be installed in either bay of the 7212
Model 102 Storage Device Enclosure. For additional
details, refer to Hardware Announcement 101-292, dated
October 2, 2001.
IBM pSeriesand p5 support of the 7212
Model 102
The drive features of the 7212 Model 102 can be attached
to pSeries or RS/6000servers as listed below.
Appropriate small computer system interface (SCSI)
cables must be specified on the initial order. For cabling
information refer to the Cable orders section of this
announcement.
The drive features of the 7212 Model 102 are supported
for attachment to the PCI Dual Channel Ultra3 SCSI
Adapter (#6203). This adapter is used in the following
pSeries and RS/6000 systems:
•7017 —S80
•pSeries 680 (7017 —S85)
•pSeries 620 (7025 —6F0, 6F1)
•7025 —F50, F80, H70
•pSeries 660 (7026 —6H0, 6H1, 6M1)
•pSeries 640 (7026 —B80)
•7026 —H70, H80, M80
•pSeries 610 (7028 —6C1, 6E1)
•pSeries 630 (7028 —6C4, 6E4)
•pSeries 670 (7040-671) through the (7040-61D) I/O
drawer
•pSeries 690 (7040-681) through the (7040-61D) I/O
drawer
•7043 —150, 270
•7044 —170, 270
•7046 —B50
•9112-265
•9114-275
•9117-570
The drive features of the 7212 Model 102 are supported
for attachment to the PCI Ultra-2 SCSI LVD (low voltage
differential or single-ended) 64-bit Adapter (#6205) on the
following pSeries and RS/6000 systems:
•7017 —S80
•pSeries 680 (7017 —S85)
•pSeries 620 (7025 —6F0, 6F1)
•7025 —F50, F80, H70
•pSeries 660 (7026 —6H0, 6H1, 6M1)
•pSeries 640 (7026 —B80)
•7026 —H70, H80, M80
•7044 —170, 270
•7046 —B50
The drive features of the 7212 Model 102 are supported
for attachment to the PCI Single-Ended Ultra SCSI
Adapter (#6206). This adapter is used in the following
pSeries and RS/6000 models:
•7017 —S80
•pSeries 680 (7017 —S85)
•pSeries 620 (7025 —6F0, 6F1)
•7025 —F50, F80, H70
•pSeries 640 (7026 —B80)
•7026 —H70, H80
•pSeries 610 (7028-6C1), pSeries 610 (7028-6E1)
•pSeries 670 (7040-671) through the (7040-61D) I/O
drawer
•pSeries 690 (7040-681) through the (7040-61D) I/O
drawer
•7043 —150, 270
•7044 —170, 270
•7046-B50
•9112-265
The drive features of the 7212 Model 102 are supported
for attachment to the Integrated Ultra2 SCSI Adapter
(LVD with VHDCI connector). This adapter is used in the
following pSeries and RS/6000 models:
•pSeries 620 (7025 —6F0, 6F1)
•7025 —F80
•pSeries 660 (7026 —6H0, 6H1, 6M1)
•pSeries 640 (7026 —B80)
•7026 —H70, H80, M80
•7044 —170, 270
The drive features of the 7212 Model 102 are supported
for attachment to the Integrated Ultra3 SCSI Adapter
(LVD with VHDCI connector). This adapter is used in the
following pSeries models:
•pSeries 610 (7028 —6C1, 6E1)
•pSeries 630 (7028 —6C4, 6E4)
•9112-265
•7038-6M2 (P650)
The drive features of the 7212 Model 102 are supported
for attachment to the PCI SCSI-2 Fast/Wide Single-Ended
Adapter (#6208) on the following pSeries systems:
•7017-S80
•7025-F50, 7025-F80, 7025-H70
•7026-H70
The drive features of the 7212 Model 102 are supported
for attachment to the PCI-X Dual Channel ULTRA320 SCSI
RAID Adapter (#5703). This adapter is used in the
following pSeries models:
•pSeries 610 (7028-6C1, 6E1)
•pSeries 630 (7028-6C4, 6E4) through the 7311-D20 I/O
Drawer
•pSeries 615 (7029-6C3, 6E3)
105-397 -2-

•pSeries 650 (7038-6M2) through the 7311-D20 I/O
Drawer
•9111
•9112-265
•9113-550
•9114-275
•9117-570
•9124-720
The drive features of the 7212 Model 102 are supported
for attachment to the PCI-X Dual Channel ULTRA320 SCSI
Adapter (#5710). This adapter is used in the following
pSeries models:
•pSeries 630 (7028-6C4,6E4) through the 7311-D10 I/O
Drawer
•pSeries 650 (7038-6M2)
•pSeries 655 (7039-651)
•pSeries 670 (7040-671) through the 7040-61D I/O
Drawer
•pSeries 690 (7040-681) through the 7040-61D I/O
Drawer
•9119-590
•9119-595
The drive features of the 7212 Model 102 are supported
for attachment to the PCI-X Dual Channel ULTRA320 SCSI
RAID Adapter (#5711). This adapter is used in the
following pSeries models:
•pSeries 630 (7028-6C4, 6E4) through the 7311-D10 I/O
Drawer
•pSeries 650 (7038-6M2, 651)
•pSeries 670 (7040-671) through the 7040-61D I/O
Drawer
•pSeries 690 (7040-681) through the 7040-61D I/O
Drawer
•9119-590
•9119-595
The drive features of the 7212 Model 102 are supported
for attachment to the PCI-X Dual Channel ULTRA320 SCSI
Adapter (#5712). This adapter is used in the following
pSeries models:
•pSeries 610 (7028-6C1, 6E1)
•pSeries 630 (7028-6C4, 6E4) through the 7311-D20 I/O
Drawer
•pSeries 615 (7029-6C3, 6E3)
•pSeries 650 (7038-6M2) through the 7311-D20 I/O
Drawer
•9111-520
•9112-265
•9113-550
•9114-275
•9117-570
•9124-720
The drive features of the 7212 Model 102 are supported
for attachment to the PCI-X Dual Channel ULTRA320 SCSI
Adapters (#1974, #1975). These adapters are used in p5
Server Model 9123-710.
IBM iSeriesand AS/400support of the 7212
Model 102
This product can be attached to an iSeries server with one
of the following features:
•PCI Magnetic Media Controller (#2768)
•PCI-X ULTRA Tape Controller (#5702)
•PCI-X RAID Controller (#5703)
•PCI-X Tape/DASD Controller (#5705)
•PCI-X ULTRA 320 Tape Controller (#5712)
For information on which PCI Controller to select, refer to
the appropriate configurator for prerequisites.
iSeries cables
SCSI cables must be specified on the initial plant order.
Refer to the Cable orders section for details.
Software requirements
pSeries and p5 servers
The Half-High LTO-2 Tape Drive features require AIX
V5.1.0 with update CD LCD4-1103-07, or later, or Linux
as listed at the end of this section.
iSeries (Models 7xx and 8xx) servers
Drive features require OS/400V5.2, or later, on all
models of the 9406 iSeries server.
i5 servers
Drive features require IBM i5/OSV5.3, or later, or Linux
as listed at the end of this section.
Linux support
•SUSE Linux Enterprise Server 9 for POWER
•Red Hat Enterprise Linux AS for POWER V3, or later
Compatibility: The Half-High LTO-2 Tape Drive (#1109)
feature is read and write compatible with Ultrium 1 tape
cartridges.
Limitations: The 7212 Storage Enclosure, with split SCSI
bus feature (#1208 or #9206), must be connected at the
end of the bus. This is required because each of the
drives in the 7212, with split SCSI bus feature, is internally
terminated.
When using two 7212 Storage Enclosures per adapter
port, the first 7212 must have the single SCSI bus feature
(#9207). The second 7212 may have either the single
SCSI bus feature (#9207) or the split SCSI bus feature
(#1208 or #9206)
Note: 7212 Storage Enclosures, manufactured before
March 2002, had a single SCSI bus equivalent to feature
number 9207.
Planning information
Customer responsibilities: Physical planning is a
customer responsibility. Detailed planning information is
in the
7212 Model 102 Setup and Operator Guide
(SA41-0054).
Customers are responsible for obtaining the appropriate
SCSI adapters and cables for system attachment.
Customers are also responsible for ordering media.
-3- 105-397

Cable orders
pSeries and p5 cables
One SCSI cable must be specified on the initial plant order if the single bus feature (#9207) is specified. If the split
internal SCSI bus feature (#1208 or #9206) is ordered, a second SCSI cable must be ordered. The following table shows
the various SCSI cable feature numbers that can be ordered depending on the host system adapter to which the IBM
7212 TotalStorageStorage Device Enclosure Model 102 will be attached.
Note: For a detailed description of adapters supported by pSeries and p5 systems, refer to the 7212 Model 102,
Hardware requirements section.
Additional cables can be purchased as MES features.
SCSI Cable
Adapter 7212-102 Term-
pSeries and p5 MES Plant to to 2nd inator
adapter feature Length feat feat 7212-102 device feature
6203, 6205, 0.5 m 5600 9765 Yes No 5097
Integrated Ultra2, 1.5 m 5601 9761 Yes No 5097
and Integrated 2.5 m 5602 9762 Yes No 5097
Ultra3 SCSI Adapter 4.5 m 5604 9764 Yes No 5097
(LVD) 10 m 5610 9760 Yes No 5097
0.5 m 5303 9733 No Yes 5097
0.7 m 5301 9751 No Yes 5097
1.5 m 5300 9750 No Yes 5097
2.5 m 5302 9752 No Yes 5097
5.0 m 5305 9755 No Yes 5097
6206 Ultra SCSI 0.5 m 5303 9733 Yes Yes 5097
SE 0.7 m 5301 9751 Yes Yes 5097
1.5 m 5300 9750 Yes Yes 5097
2.5 m 5302 9752 Yes Yes 5097
5.0 m 5305 9755 Yes Yes 5097
(5703, 5710, 5711, 0.5 m 5600 9765 Yes No 5097
5712, 1974, 1975) 1.5 m 5601 9761 Yes No 5097
PCI-X Dual Channel 2.5 m 5602 9762 Yes No 5097
ULTRA320 SCSI14.5 m 5604 9764 Yes No 5097
RAID Adapter110.0 m 5610 9760 Yes No 5097
1Only 7212 Model 102 with SCSI-LVD feature numbers 1100, 1103, 1104, 1105, 1106, 1107, 1108, and 1109 can use the 4.5 m and
10.0 m SCSI cables. Feature numbers 1101 and 1102 are single-ended devices and are not supported by these cables. Also, if
using the 10 meter cable, the 7212 must be the only device on the bus.
Refer to the Specify Features in the Sales Manual for a detailed description of the above features.
Split internal SCSI bus cable assembly
Use the following tables to determine the maximum SCSI cable length per bus, using split internal SCSI bus cable
assembly, feature numbers 1208 or 9206. Feature number 9206 includes two LVD/DE terminators.
pSeries and p5 Adapter feature number 6206 with one 7212 Model 102 per adapter port
7212 Bay-A
Feature 7212 Bay-B Feature number
number 1204 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109
1204/9204 NA 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1100 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1101 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1102 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1103 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1104 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1105 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1106 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1107 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1108 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1109 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
Note: Cable lengths are in meters.
NA = Not applicable
105-397 -4-

pSeries and p5 Adapters feature numbers 6203, 6205, the Integrated ULTRA2 SCSI Adapter, feature number 5703, 5710,
5711, or 5712 with one 7212 Model 102 per adapter port:
7212 Bay-A
Feature 7212 Bay-B Feature number
number 1204 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109
1204/9204 NA 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1100 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1101 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 10.0
1102 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 10.0
1103 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1104 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1105 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1106 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1107 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1108 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1109 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
Note: Cable lengths are in meters.
pSeries and p5 Adapters feature numbers 6203, 6205, the Integrated ULTRA2 SCSI Adapter, feature numbers 5703, 5710,
5711, 5712, PCI-X Dual Channel Ultra320 SCSI Adapter, 1974 or 1975, with two 7212 Model 102 per adapter port
Supported configuration: Only 7212 Model 102 features numbers 1100, 1104, 1105, 1107, 1108, and 1109 are supported
with these adapters and two Model 102s. The total length of the two cables may not exceed 9.5 meters.
Example: If the cable length to the first 7212 is 2.5 meters, the length of the cable from the first to the second 7212 may
not exceed 7.0 meters.
pSeries and p5 Adapters feature numbers 6203, 6205, the Integrated ULTRA2 SCSI Adapter, feature number 5703, or
5712 with one 7212 Model 102 and one 72xx LVD Single Device Bridge Box per adapter port
7212 Bay A and/or Bay B Feature number
1204 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109
NA 9.5 NS NS 9.5 9.5 NS 9.5 9.5 9.5 9.5
NS = Not supported
Note: Cable lengths are in meters.
Note: The 7212 Storage Enclosures with split SCSI bus features (#1208 or #9206) must be connected at the end of the
bus. This is required because each of the drives in the 7212 with the split SCSI bus feature is internally terminated.
Single internal SCSI bus cable assembly
Use the following tables to determine the maximum SCSI cable length per bus, using single internal SCSI bus cable
assembly, feature number 9207. Feature number 9207 includes two LVD/SE terminators.
pSeries and p5 Adapter feature number 6206 with one 7212 Model 102 per adapter port
7212 Bay-A
Feature 7212 Bay-B Feature number
number 1204 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109
1204/9204 NA 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1100 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1101 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1102 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1103 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1104 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1105 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1106 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1107 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1108 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1109 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
Note: Cable lengths are in meters.
-5- 105-397

pSeries and p5 Adapters feature numbers 6203, 6205, the Integrated ULTRA2 SCSI Adapter, feature number 5703, 5710,
5711, or 5712 with one 7212 Model 102 per adapter port
7212 Bay-A
Feature 7212 Bay-B Feature number
number 1204 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109
1204/9204 NA 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1100 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1101 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 10.0
1102 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 10.0
1103 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1104 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1105 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1106 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1107 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1108 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
1109 10.0 10.0 1.5 1.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0
Note: Cable lengths are in meters.
pSeries and p5 Adapters feature numbers 6203, 6205, the Integrated ULTRA2 SCSI Adapter, feature number 5703, 5710,
5711, or 5712 with two 7212 Model 102s per adapter port or one 7212 Model 102 and one 72xx external device per
adapter port
7212 Bay-A
Feature 7212 Bay-B Feature number
number 1204 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109
1204/9204 NA 9.0 NS NS 9.0 9.0 9.0 NS 9.0 9.0 9.0
1100 9.0 9.0 NS NS 9.0 9.0 9.0 NS 9.0 9.0 9.0
1101 NS NS NS NS NS NS NS NS NS NS NS
1102 NS NS NS NS NS NS NS NS NS NS NS
1103 9.0 9.0 NS NS 9.0 9.0 9.0 NS 9.0 9.0 9.0
1104 9.0 9.0 NS NS 9.0 9.0 9.0 NS 9.0 9.0 9.0
1105 9.0 9.0 NS NS 9.0 9.0 9.0 NS 9.0 9.0 9.0
1106 NS NS NS NS NS NS NS NS NS NS NS
1107 9.0 9.0 NS NS 9.0 9.0 9.0 NS 9.0 9.0 9.0
1108 9.0 9.0 NS NS 9.0 9.0 9.0 NS 9.0 9.0 9.0
1109 9.0 9.0 NS NS 9.0 9.0 9.0 NS 9.0 9.0 9.0
Note: Cable lengths are in meters.
Notes:
•When using two 7212 Storage Enclosures per adapter
port, the first 7212 must have the single SCSI bus
feature (#9207). The second 7212 may have either the
single SCSI bus feature (#9207) or split SCSI bus
features (#1208 or #9206).
•7212 Storage Enclosures, manufactured before
March 2002, had a single SCSI bus, equivalent to
feature number 9207.
iSeries and i5 cables
One SCSI cable must be specified with the 7212 if the
single bus feature number 9207 is specified. If the split
bus feature number 1208 or 9206 is ordered, one SCSI
cable must be specified for each storage device
(maximum of 2 per 7212). The cables must be specified
on the initial plant order. The following table shows the
various SCSI cable feature numbers that can be ordered
depending on the host iSeries system adapter to which
the 7212 Model 102 will be attached.
Note: For iSeries and i5, the 7212 Model 102 must be the
only device attached to the external bus.
iSeries SCSI Cable Feature number
adapter feature length plant both
2768 1.5 m 9750 5300
2.5 m 9752 5302
5702, 5705 0.5 m 9765 5600
5703, 5712 1.5 m 9761 5601
2.5 m 9762 5602
4.5 m 9764 5604
10.0 m 9760 5610
Supplies: The part numbers for additional supplies for the
7212 Model 102 feature number 1109 are:
IBM part
number Supply item
08L9870 200 GB Ultrium 2 Data Cartridge
24R0395 LTO Test Cartridge
35L2086 LTO Cleaning Cartridge
For additional tape data or cleaning cartridges refer to
http://www.storage.ibm.com/media
For additional media supplies, refer to
http://www.storage.ibm.com/media
To purchase IBM-branded media and media supplies, call
888-IBM-MEDIA (426-6334) in the U.S. and Canada, or go
to
http://www.storage.ibm.com/media
105-397 -6-

Security, auditability, and control
These products use the security and auditability features of the host system and application programs.
The customer is responsible for evaluation, selection, and implementation of security features, administrative
procedures, and appropriate controls in application systems and communications facilities.
Terms and conditions
MES discount applicable: Equal to the volume commitment discount
Field installable feature: Yes
Warranty period: One year
Customer setup: Yes
Licensed Internal Code: No
Prices
Monthly
Machine Feature Purchase maint.
Description type Model number price charge
Half-High LTO-2 Tape Drive 7212 102 1109 $4,350.00 $64.00
Cleaning Cartridge 7212 102 8002 113.00 NC
200 GB Data Cartridge 7212 102 8101 81.60 NC
HHLTO Gen 2 Multi Cart Kit 7212 102 8103 646.00 NC
Test Cartridge 7212 102 8104 125.00 NC
Cleaning Cartridge —5 pk 7212 102 8105 565.00 NC
NC = No charge
Machine type/ Plant/
model/feature Field MES
Description number install removal CSU
Half-High LTO-2 Tape Drive 7212-102/1109 Both No Yes
Cleaning Cartridge 7212-102/8002 Plant No Yes
200 GB Data Cartridge 7212-102/8101 Plant No Yes
HHLTO Gen 2 Multi Cart Kit 7212-102/8103 Plant No Yes
Test Cartridge 7212-102/8104 Plant No Yes
Cleaning Cartridge —5 pk 7212-102/8105 Plant No Yes
Order now
To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner.
To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968).
Phone: 800-IBM-CALL (426-2255)
Fax: 800-2IBM-FAX [phone])
Internet: ibm—[email protected]
Mail: IBM Americas Call Centers
Dept: IBM CALL, 11th Floor
105 Moatfield Drive
North York, Ontario
Canada M3B 3R1
Reference: YE001
The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs
of IBM products.
Note: Shipments will begin after the planned availability date.
Trademarks
IBMLink, iSeries, i5/OS, and POWER are trademarks of International Business Machines Corporation in the United States or other
countries or both.
The e-business logo, pSeries, RS/6000, AS/400, AIX, OS/400, and TotalStorage are registered trademarks of International Business
Machines Corporation in the United States or other countries or both.
Linux is a trademark of Linus Torvalds in the United States, other countries or both
Other company, product, and service names may be trademarks or service marks of others.
-7- 105-397