iBoard IB20RIC6 User manual

iRunning Board Installation Instruction
Part#: IB20RIC6
Application: For 2008-2018 Toyota Sequoia
Page 1of 2
The instruction here is for your reference only. We strongly recommend the
professional installer for best result. We are not responsible for any damage
caused by the installation. Thank you for choosing our product!
REV: 20180101
Installation Procedure
Step
Description
1
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION.
2
Attach mounting brackets as shown SEE FIGURE 1.
3
Insert square head bolts as shown (4 per slot,8 per board).SEEFIGURES 2.
4
Attach board to brackets as shown on FIGURE 3 . Make sure board and brackets are properly aligned and
tighten fasteners.
5
Repeat Installation for passenger side.
6
INSTALLATION IS COMPLETE.
FINISH PROTECTION
Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect
the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish
or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
Item
Part Name
QTY
Item
Part Name
QTY
1
Step Board, Passenger
1
8
M8X1.25-30mm Hex Bolt
16
2
Step Board, Driver
1
9
M8 Flat Washers
16
3
Front Bracket (FB)
2
10
M8 Lock Washers
16
4
Front/Center Bracket (FCB)
2
11
M6 Square Head Bolt
16
5
Rear/Center Bracket (RCB)
2
12
M6 Nylon Lock Nuts
16
6
Rear Bracket Driver Side (LRB)
1
13
M6 Flat Washers
16
7
Rear Bracket Passenger Side (RRB)
1
RCB
FCB
FB
RRB
LRB

iRunning Board Installation Instruction
Part#: IB20RIC6
Application: For 2008-2018 Toyota Sequoia
Page 2of 2
The instruction here is for your reference only. We strongly recommend the
professional installer for best result. We are not responsible for any damage
caused by the installation. Thank you for choosing our product!
REV: 20180101
FIGURE 2
INSTALLATION IS COMPLETE.
FIGURE 3