Ice-O-Matic Hotel Dispenser CD 40022 User manual

®
CD 40022 Series
Hotel Dispenser
CD 40022
ICE-O-Matic ®is the Best ICE Making Solution for:
Hard Water, Food Safety and Tight Spaces
✓Stores 120 lbs. (55 Kgs.) of ICE
✓Constructed from sturdy, corrosion-resistant
300 series stainless steel
✓ Only 77 inches (2137 mm) tall with ICE machine
✓ Only 22 inches (558 mm) wide
Problem
Power Clean
Allows access to the bin for easy cleaning
without moving the ICE machine. Interlock safety
switch turns off machine agitation when top-front
access panel is removed.
Simple Operation
• Turbo Dispense - dispenses a 1/4 lb. of ICE per second
• Push to Dispense - user friendly dispensing
• Smudge Proof Finish - prevents fingerprints
and smudges
Solution
Hard To Clean
Ice machine must be lifted off of
other dispensers for cleaning
Difficult Dispensing
Ice is sometimes slow and difficult
to dispense
Ice Melts Too Fast
Inadequate storage insulation
causes Ice to melt too quickly
Maximum Preservation
Hotel Dispenser is insulated with an average of 4
inches of foam for maximum ICE preservation
Tight-Fitting Spaces
Vending area utilization
Maximum ICE
Maximum ICE storage in a minimum amount
of space with an ultra-low profile

Dimensions and Air Flow
CD 40022 Push 120 (55) 115/60/1 2 2.1 15 199 (91)
CD 40522 Push 120 (55) 230/50/1 2 2.1 15 199 (91)
ICE-O-Matic’s® machines are not designed for outdoor installations. ICE-O-Matic®remote condensers are designed for outdoor installations.
Machine requires voltage indicated on rating name plate. Failures caused by improper voltage are not considered factory defects. Extended
periods of operation at temperature exceeding limitations constitutes misuse under the terms of ICE-O-Matic®Manufacturer’s Limited Warranty,
resulting in a loss of warranty coverage.
Model Dispenser ARI Bin Voltage Min. Circuit Maximum Shipping
No. Operated by: Storage Capacity Characteristics No. of Wires Ampacity Fuse Size Weight lbs. (Kgs.)
ORDERING AND SPECIFICATION INFORMATION
Air out -
(side discharge)
Air in -
(rear of ICE Maker)
53.25"
(1553 mm)
22"
(559 mm)
24"
(610 mm)
33.5"
(851 mm)
OPERATING LIMITS
Ambient Temp. Range
Air & Water 50° - 110°F (10° - 43°C)
Water Temp. Range 40° - 100°F (4.5° - 38°C)
Water Pressure Ice Maker Min. 20 psi (1.4 bar)
Water in Max. 60 psi (6.9 bar)
Condenser Inlet Water Min. 20 psi (1.4 bar)
(Water cooled only) Max. 60 psi (6.9 bar)
CD 40022 Series Hotel Dispenser
60 Hz
50 Hz
Air-Cooled lbs. (kgs.) 320 (145) 301 (137) 506 (230) 478 (217)
Water-Cooled lbs. (kgs.) 355 (161) n/a 528 (240) n/a
Remote-Cooled lbs. (kgs.) n/a n/a n/a n/a
Voltage Char. 115/60/1 2320/50/1 115/60/1 230/50/1
1. Tested at 70º Air/50º Water.
2. All specifications and performance data are subject to normal manufacturing variances.
Note #1: Model CD40022 and CD40522 dispensers accept all 22” ICE Series™ Cube ICE Makers
Note #2: CD40022 and CD40522 Series units do not require an Adaptor and Bin Level Kit
Model ICE 0320 ICE0325 ICE 0520 ICE 0525
ICE PRODUCTION FOR OPTIONAL CUBE ICE MAKERS
— POUNDS (KILOGRAMS) PER 24 HOURS
ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239
Tel. [phone] Fax. [phone] www.iceomatic.com
We reserve the right to make changes in design and construction at any time
without obligation.
2004 © ICE-O-Matic Rev Code: 4005A - 11/03-SS
I
S
O
9
0
0
1
C
E
R
T
I
F
I
E
D
Half Cube
7/8" x 7/8" x 3/8"
(22mm x 22mm x 10mm)
Full Cube
7/8" x 7/8" x 7/8"
(22mm x 22mm x 22mm)
23"
(584 mm)
22"
558.8
6"
152.4
53 1/4"
1351.3
ICE FILL STATION
8 3/4 [221.5] HIEGHT
13 1/2 [342.9] WIDTH
8 1/2 [215.9] DEPTH
33 1/2"
850.1
25 5/8"
650.6
16"
406.4
1"
24.1
3 1/2"
88.9
7"
179.1
POWER
CORD
3/4 FPT
DRAIN
(2) 5/16-18 UNC
ICE HEAD