Ice-O-Matic ICE0250 Series User manual

SERVICE AND INSTALLATION MANUAL
THE ICE SERIES CUBERS
ICE0250 through ICE2100 SERIES*
*Includes Undercounter and 22 Inch Series
ICE-O-Matic
11100 East 45th Ave
Denver, Colorado 80239
Part Number 9081270-01 Date 1/07

ICE Series Table Of Contents
Page A1
Table of Contents
Table of Contents Page A1
General Information
How To Use This Manual Page A2
Model And Serial Number Format Page A3
Electrical And Mechanical Specifications Page A5-A8
Installation Guidelines Page A9
Electrical And Plumbing Requirements Page A10-A17
Remote Condenser Installation Page A18-A19
How The Machine Works Page A20
Undercounter Model Bin Removal Page A21-A22
Warranty Information Page A23-A24
Scheduled Maintenance
Maintenance Procedure Page B1
Cleaning and Sanitizing Instructions Page B1-B2
Winterizing Procedure Page B3
Cabinet Care Page B4
Troubleshooting Trees
How to Use The Troubleshooting Trees Page C1
Troubleshooting Trees Table Of Contents Page C2
Troubleshooting Trees Page C3-C18
Water System
Water Distribution And Components Page D1-D5
Refrigeration System
Refrigeration Cycle And Components Page E1
Harvest Cycle Page E5
Remote System Page E5-E6
Pump Down System Page E7
Refrigerant Specifications Page E8-E13
Electrical System
Control Circuit Page F1
Compressor And Start Components Page F1-F2
Untimed Freeze Cycle Page F3
Timed Freeze Cycle Page F4
Harvest Cycle Page F5-F9
Pump Down System Page F9
Wiring Diagrams Page G1-G68

ICE Series General Information
PageA2
How To Use This Manual
ICE-O-Matic provides this manual as an aid to the service technician in installation, operation,
and maintenance of the ICE Series (electro-mechanical) cube ice machines. If used properly
this manual can also assist the service technician to troubleshoot and diagnose most of the
problems that may occur with the machine.
The first two sections of this manual provide general information and maintenance information.
The remainder of the manual beginning withSection C provides troubleshooting and service
information. Section C contains flow charts called troubleshooting trees. Page C-1 provides
instructions on using the troubleshooting trees. Each troubleshooting tree is named to describe
a particular problem with the operation of the machine.
When following the troubleshooting trees, the service technician will be led through questions
and checks and end up with a probable solution. When using the troubleshooting trees, itis
important that the service technician understand the operation and adjustments of the
components being checked and the component suspected of malfunctioning. A detailed
description of the operation and adjustments of the components as well as other service
information is available in the pages that follow Section C.
Sections D, E, and F focus on a particular system in the ice machine: water distribution system,
refrigeration system, and it is important that these sections be used together with the
Troubleshooting Trees in Section C.
Most aspects of the ICE Series machines are covered in this manual, however, should you
encounter any conditions not addressed herein, please contact the ICE-O-Matic Technical
Service Department for assistance. You may also fax, e-mail or write the ICE-O-Matic
Technical Service Department:
ICE-O-Matic
11100 E. 45
th
Ave.
Denver, Co. 80239
Attn: Technical Service Department
E-Mail: [email protected]
Telephone Numbers AnyService communication must include:
800-423-3367 All Department Model Number
888-349-4423 Technical Assistance Only Serial number
303-371-3737 A detailed explanation of the problem
Note the warning symbol where it appears in this manual.
It is an alert for important safety information on a hazard
that might cause serious injury.
Keep this manual for future reference.
The ICE Series Service Parts Manuals are available separately.
ICE-O-Matic products are not designed for outdoor installation.

ICE Series General Information
PageA3
Model and Serial Number Format
Model Numbers
ICE 040 0HA
Condenser Type: A=Air W=Water R=Remote T=Top Discharge Air Cooled
Cube Size: H=Half (3/8 X 7/8 X7/8) F=Full (7/8 X7/8 X7/8)
Voltage: 0=115V 5=240/50/1 6=208-230/60/1 7=208-230/60/3
Approximate 24 hour ice production: (x 10 @ 70°F/21°C Air and 50°F/10°C Water)
Series: Slab ice cuber, Stainless Steel Cabinet
Serial Number Date Code
The first letter in the serial number indicates the month and decade of manufacture.
The first digit in the serial number indicates the year of manufacture.
Example: A0XX-XXXXX-Z is manufactured January 2000
A1XX-XXXXX-Z is manufactured January 2001
1990-1999 MONTH 2000-2004
M JANUARY A
N FEBRUARY B
P MARCH C
Q APRIL D
R MAY E
S JUNE F
T JULY G
U AUGUST H
V SEPTEMBER I
W OCTOBER J
Y NOVEMBER K
Z DECEMBER L
Note: The letter O and letter X are not used.
Reference newserial number format on next page.

ICE Series General Information
Page A4
Model and Serial Number Format
Since all Enodis companies will eventually be
utilizing same operating system, a company wide
format for serial numbers has been designed.
This format is 14 characters long and begins with a
date code followed by the ICE-O-Matic identifier,
and then a sequential number. This is an entirely
numerical serial number.
The new serial number will look like the example.
0407 1280 010123
010123 is the serial identifier.
1280 is the identifier. (ICE-O-Matic)
0407 is the date code, in YYMM format. (2004 July)
The date code will change monthly and yearly to
reflect the date of manufacture.
Large data plate will be placed on the back of
the unit.
Small data plate will be placed by the service
valves.

ICE Series General Information
Page A5
Electrical and Mechanical Specifications, “ICE” Series 60 Cycle Machine
Model
Ref.
Type
Charge
Ounces
Back
Press.
Approx.
Head
Press.
Approx.
Timer
Initiate
Setting
Cycle Time
Approx.
Minutes
70/50-90/70
Batch
Weight
Pounds
Volt. Cycle
Phase
ICEU150*A1 R-404a 13 65 - 44 175 - 400 44 25 - 45 3 115-60-1
ICEU150*W1 R-404a 10 65 - 50 250 50 25 - 45 3 115-60-1
ICEU150*A2 R-404a 13 65 - 44 175 - 400 44 25 - 45 3 115-60-1
ICEU150*W2 R-404a 10 65 - 50 250 50 25 - 45 3 115-60-1
ICEU150A3R-404a 12 60 - 47 205-400 47 24 - 38 3 115-60-1
ICEU150W3R-404a 9 60 - 47 250 47 22 - 28 3 115-60-1
ICEU200*A1 R-404a 13 65 - 42 175 - 400 42 19 - 36 3 115-60-1
ICEU200*W1 R-404a 9 65 - 42 250 42 19 - 36 3 115-60-1
ICEU200*A2R-404a 13 65 - 42 175 - 400 42 19 - 36 3 115-60-1
ICEU200*W2R-404a 9 65 - 42 250 42 19 - 36 3 115-60-1
ICEU220A R-404a 12 60 - 42 218-400 42 17 - 24 3 115-60-1
ICEU220W R-404a 9 60 - 41 250 41 17 - 20 3 115-60-1
ICEU206*A1 R-134a 14 30 - 13 120 - 170 13 19 - 36 3 230-60-1
ICEU206*W1 R-134a 11 30 - 13 125 13 19 - 36 3 230-60-1
ICEU226A R-404a 12 60 - 41 218-400 41 18 - 28 3 230-60-1
ICEU226W R-404a 9 60 - 41 250 41 19 - 23 3 230-60-1
ICEU300A R-404a 16 51 - 30 218-400 33 15 - 20 3 115-60-1
ICEU300W R-404a 13 60 - 27 250 33 12 - 15 3 115-60-1
ICE0250*A2 R-404a 16 60 - 35 175 - 400 35 12 - 22 3 115-60-1
ICE0250*A-T2 R-404a 16 60 - 37 175 - 400 37 12 - 22 3 115-60-1
ICE0250*W2 R-404a 13 60 - 35 250 35 12 - 19 3 115-60-1
ICE0250*A4R-404a 25 60 - 35 200 - 400 36 13 - 17 3 115-60-1
ICE0250*A-T4R-404a 25 60 - 37 200 - 400 36 13 - 17 3 115-60-1
ICE0250*W4R-404a 13 60 - 35 250 35 13 - 16 3 115-60-1
ICE0320*A1 R-404a 18 60 - 36 175 - 400 36 14 - 25 3 115-60-1
ICE0320*W1 R-404a 15 60 - 36 250 36 12 - 17 3 115-60-1
ICE0320*A2 R-404a 18 60 - 36 175 - 400 36 14 - 25 3 115-60-1
ICE0320*W2 R-404a 11 60 - 36 250 36 12 - 17 3 115-60-1
ICE0320*A3R-404a 18 60 - 36 200 - 400 36 14 - 25 3 115-60-1
ICE0320*W3R-404a 11 60 - 36 250 36 12 - 17 3 115-60-1
ICE0400*A1 R-404a 32 65 - 41 175 - 400 41 16 - 21 5.5 115-60-1
ICE0400*A-T1 R-404a 32 65 - 41 175 - 400 41 16 - 26 5.5 115-60-1
ICE0400*W1 R-404a 14 60 - 35 250 35 15 - 21 5.5 115-60-1
ICE0400*A2 R-404a 29 65 - 41 175 - 400 41 16 - 21 5.5 115-60-1
ICE0400*A-T2 R-404a 29 65 - 41 175 - 400 41 16 - 26 5.5 115-60-1
ICE0400*W2 R-404a 14 60 - 35 250 35 15 - 21 5.5 115-60-1
ICE0400*A3R-404a 30 54 - 39 200-400 44 14 - 20 5.5 115-60-1
ICE0400*A-T3R-404a 30 56 - 37 200-400 44 14 - 21 5.5 115-60-1
ICE0400*W3R-404a 14 60 - 38 250 43 14 - 18 5.5 115-60-1
ICE0406*A1 R-404a 32 60 - 35 175 - 400 35 17 - 30 5.5 208/230-60-1
ICE0406*W1 R-404a 16 60 - 35 250 35 17 - 25 5.5 208/230-60-1
ICE0406*A2 R-404a 32 60 - 35 175 - 400 35 17 - 25 5.5 208/230-60-1
ICE0406*W2 R-404a 16 60 - 35 250 35 17 - 25 5.5 208/230-60-1
ICE0406*A3R-404a 30 58 - 34 210 - 400 43 14 -19 5.5 208/230-60-1
ICE0406*W3R-404a 14 57 - 37 250 43 14 - 17 5.5 208/230-60-1

ICE Series General Information
Page A6
Electrical and Mechanical Specifications, “ICE” Series 60 Cycle Machine
Model
Ref.
Type
Charge
Ounces
Back
Press.
Approx.
Head
Press.
Approx.
Timer
Initiate
Setting
Cycle Time
Approx.
Minutes
70/50-90/70
Batch
Weight
Pounds
Volt. Cycle
Phase
ICE0500*A1 R-404a 37 60 - 37 175 - 400 37 13 - 21 5.5 115-60-1
ICE0500*A-T1 R-404a 37 60 - 37 175 - 400 37 13 - 21 5.5 115-60-1
ICE0500*W1 R-404a 15 60 - 35 250 35 13 - 21 5.5 115-60-1
ICE0500*R1 R-404a 160 60 - 35 192 - 400 35 13 - 22 5.5 115-60-1
ICE0500*A2 R-404a 22 60 - 37 175 - 400 37 13 - 21 5.5 115-60-1
ICE0500*A-T2 R-404a 22 60 - 37 175 - 400 37 13 - 21 5.5 115-60-1
ICE0500*W2 R-404a 15 60 - 35 250 35 13 - 21 5.5 115-60-1
ICE0500*R2 R-404a 160 60 - 35 240 - 400 35 13 - 22 5.5 115-60-1
ICE0500*R3 R-404a 132 60 - 35 240 - 400 35 13 - 22 5.5 115-60-1
ICE0500*A3R-404a 25 55 - 31 217 - 400 37 13 - 16 5.5 115-60-1
ICE0500*A-T3R-404a 25 60 - 32 212 - 400 39 13 - 16 5.5 115-60-1
ICE0500*W3R-404a 15 48 - 31 250 38 13 - 15 5.5 115-60-1
ICE0500*R4R-404a 132 50 - 32 240 - 400 39 13 - 16 5.5 115-60-1
ICE0520*A1 R-404a 32 65 - 41 175 - 400 41 16 - 27 5.5 115-60-1
ICE0520*W1 R-404a 14 65 - 44 250 44 16 - 22 5.5 115-60-1
ICE0520*A2 R-404a 20 65 - 41 175 - 400 41 16 - 27 5.5 115-60-1
ICE0520*W2 R-404a 14 65 - 44 250 44 16 - 22 5.5 115-60-1
ICE0520*A3R-404a 21 56 - 39 212 - 400 46 14 - 20 5.5 115-60-1
ICE0520*W3R-404a 12 54 - 39 250 44 14 - 17 5.5 115-60-1
ICE0606*A1 R-404a 36 60 - 35 175 - 400 35 11 - 19 5.5 208/230-60-1
ICE0606*A-T1 R-404a 36 60 - 35 175 - 400 35 11 - 19 5.5 208/230-60-1
ICE0606*W1 R-404a 18 60 - 35 250 35 12 - 17 5.5 208/230-60-1
ICE0606*R1 R-404a 160 60 - 33 240 - 400 33 11 - 18 5.5 208/230-60-1
ICE0606*A2 R-404a 24 60 - 35 175 - 400 35 11 - 19 5.5 208/230-60-1
ICE0606*A-T2 R-404a 24 60 - 35 175 - 400 35 11 - 19 5.5 208/230-60-1
ICE0606*W2 R-404a 18 60 - 35 250 35 12 - 17 5.5 208/230-60-1
ICE0606*R2 R-404a 160 60 - 33 240 - 400 33 11 - 18 5.5 208/230-60-1
ICE0606*R3 R-404a 132 60 - 33 240 - 400 33 11 - 18 5.5 208/230-60-1
ICE0606*A3R-404a 24 60 - 46 200 - 400 35 11 - 15 5.5 208/230-60-1
ICE0606*A-T3R-404a 24 60 - 46 200 - 400 35 11 - 15 5.5 208/230-60-1
ICE0606*W3R-404a 17 45 - 40 250 34 11 - 13 5.5 208/230-60-1
ICE0606*R4R-404a 132 44 - 42 240 - 400 38 12 - 15 5.5 208/230-60-1
ICE0806*A1 R-404a 41 60 - 35 175 - 400 35 11 - 18 7 208/230-60-1
ICE0806*W1 R-404a 29 60 - 35 250 35 10 - 15 7 208/230-60-1
ICE0806*R1 R-404a 240 60 - 35 192 - 400 35 9 - 16 7 208/230-60-1
ICE0806*A2R-404a 27 60 - 35 175 - 400 35 11 - 18 7 208/230-60-1
ICE0806*W2R-404a 24 60 - 35 250 35 10 - 15 7 208/230-60-1
ICE0806*R2R-404a 240 60 - 35 240 - 400 35 9 - 16 7 208/230-60-1
ICE0806*R3R-404a 176 60 - 35 240 - 400 35 9 - 16 7 208/230-60-1
ICE1006*A1 R-404a 50 60 - 37 175 - 400 37 9 - 15 7 208/230-60-1
ICE1006*W1 R-404a 32 60 - 37 250 37 9 - 13 7 208/230-60-1
ICE1006*R1 R-404a 240 60 - 36 192 - 400 36 9 - 14 7 208/230-60-1
ICE1006*A2R-404a 34 60 - 37 175 - 400 37 9 - 15 7 208/230-60-1
ICE1006*W2R-404a 24 60 - 37 250 37 9 - 13 7 208/230-60-1
ICE1006*R2R-404a 240 60 - 36 240 - 400 36 9 - 14 7 208/230-60-1
ICE1006*R3R-404a 176 60 - 36 240 - 400 36 9 - 14 7 208/230-60-1
ICE1007*A1 R-404a 50 60 - 35 175 - 400 35 10 - 16 7 208/230-60-3
ICE1007*W1 R-404a 32 60 - 35 250 35 10 - 14 7 208/230-60-3
ICE1007*R1 R-404a 240 60 - 35 192 - 400 35 11 - 15 7 208/230-60-3
ICE1007*A2R-404a 34 60 - 35 175 - 400 35 10 - 16 7 208/230-60-3
ICE1007*W2R-404a 24 60 - 35 250 35 10 - 14 7 208/230-60-3
ICE1007*R2R-404a 240 60 - 35 240 - 400 35 11 - 15 7 208/230-60-3
ICE1007*R3R-404a 176 60 - 35 240 - 400 35 11 - 15 7 208/230-60-3

ICE Series General Information
Page A7
Electrical and Mechanical Specifications, ICE” Series 60 Cycle Machine
Model
Ref.
Type
Charge
Ounces
Back
Press.
Approx.
Head
Press.
Approx.
Timer
Initiate
Setting
Cycle Time
Approx.
Minutes
70/50-90/70
Batch
Weight
Pounds
Volt. Cycle
Phase
ICE1406*A1 R-404a 108 60 - 35 175 - 400 35 11 - 17 11 208/230-60-1
ICE1406*W1 R-404a 28 60 - 35 250 35 11 - 16 11 208/230-60-1
ICE1406*R1 R-404a 240 60 - 35 192 - 400 35 11 - 17 11 208/230-60-1
ICE1406*A2 R-404a 104 60 - 35 175 - 400 35 11 - 17 11 208/230-60-1
ICE1406*W2 R-404a 25 60 - 35 250 35 11 - 16 11 208/230-60-1
ICE1406*R2 R-404a 240 60 - 35 192 - 400 35 11 - 17 11 208/230-60-1
ICE1407*A1 R-404a 108 60 - 35 175 - 400 35 12 - 20 11 208/230-60-3
ICE1407*W1 R-404a 28 60 - 35 250 35 12 - 18 11 208/230-60-3
ICE1407*R1 R-404a 240 60 - 35 192 - 400 35 12 - 20 11 208/230-60-3
ICE1407*A2R-404a 104 60 - 35 175 - 400 35 12 - 20 11 208/230-60-3
ICE1407*W2R-404a 25 60 - 35 250 35 12 - 18 11 208/230-60-3
ICE1407*R2R-404a 240 60 - 35 240 - 400 35 12 - 20 11 208/230-60-3
ICE1506*R R-404a 240 60 - 35 240 - 400 35 11 - 16 11 208/230-60-1
ICE1606*R1 R-404a 240 60 - 35 192 - 400 35 11 - 16 11 208/230-60-1
ICE1806*W1 R-404a 42 60 - 34 250 34 11 - 17 14 208/230-60-1
ICE1806*R1 R-404a 400 60 - 37 192 - 400 37 10 - 17 14 208/230-60-1
ICE1806*W2R-404a 35 60 - 34 250 34 11 - 17 14 208/230-60-1
ICE1806*R2R-404a 400 60 - 37 240 - 400 37 10 - 17 14 208/230-60-1
ICE1807*W1 R-404a 42 60 - 35 250 35 10 - 16 14 208/230-60-3
ICE1807*R1 R-404a 400 60 - 35 192 - 400 35 10 - 17 14 208/230-60-3
ICE1807*W2R-404a 35 60 - 35 250 35 10 - 16 14 208/230-60-3
ICE1807*R2R-404a 400 60 - 35 240 - 400 35 10 - 17 14 208/230-60-3
ICE2106*W1 R-404a 50 60 - 35 250 35 9 - 14 14 208/230-60-1
ICE2106*R1 R-404a 400 60 - 37 192 - 400 37 9 - 14 14 208/230-60-1
ICE2106*W2R-404a 37 60 - 35 250 35 9 - 14 14 208/230-60-1
ICE2106*R2R-404a 400 60 - 37 240 - 400 37 9 - 14 14 208/230-60-1
ICE2107*W1 R-404a 50 60 - 35 250 35 9 - 13 14 208/230-60-3
ICE2107*R1 R-404a 400 60 - 35 192 - 400 35 9 - 14 14 208/230-60-3
ICE2107*W2R-404a 37 60 - 35 250 35 9 - 13 14 208/230-60-3
ICE2107*R2R-404a 400 60 - 35 240 - 400 35 9 - 14 14 208/230-60-3

ICE Series General Information
Page A8
Electrical and Mechanical Specifications, “ICE” Series 50 Cycle Machine
Model Ref. Type
Charge
Ounces
Back Press.
Approx.
Head Press.
Approx.
Timer
Initiate
Setting
Cycle Time
Approx. Minutes
70/50-90/80
Batch
Weight
Pounds Volt. Phase Cycle
ICEU205*A1 R-134a 14 30 - 13 120 - 170 13 19 - 36 3 220-240/50/1
ICEU205*W1 R-134a 11 30 - 13 125 13 19 - 36 3 220-240/50/1
ICEU205*A2R-134a 14 30 - 13 120 - 170 13 19 - 36 3 220-240/50/1
ICEU205*W2R-134a 11 30 - 13 125 13 19 - 36 3 220-240/50/1
ICEU225*A R-404a 12 60 - 35 175 - 400 45 22 - 32 3 220-240/50/1
ICEU225*W R-404a 9 60 - 35 250 46 21 - 25 3 220-240/50/1
ICEU305A R-404a 14 51 - 30 218-400 33 15 - 20 3 220-240/50/1
ICEU305W R-404a 13 60 - 27 250 33 13 - 18 3 220-240/50/1
ICE0305*A2 R-404a 26 60 - 35 175 - 400 35 13 - 20 3 220-240/50/1
ICE0305*W2 R-404a 14 60 - 35 250 35 13 - 18 3 220-240/50/1
ICE0305*A3R-404a 23 60 - 53 200 - 400 32 12 - 16 3 220-240/50/1
ICE0305*W3R-404a 12 48 - 47 250 31 12 - 15 3 220-240/50/1
ICE0325*A1 R-404a 22 60 - 35 175 - 400 35 13 - 20 3 220-240/50/1
ICE0325*A2 R-404a 22 60 - 35 175 - 400 35 13 - 20 3 220-240/50/1
ICE0325*A3R-404a 22 60 - 35 175 - 400 35 13 - 20 3 220-240/50/1
ICE0405*A1 R-404a 32 60 - 35 175 - 400 35 15 - 26 5.5 220-240/50/1
ICE0405*W1 R-404a 16 60 - 35 250 35 14 - 20 5.5 220-240/50/1
ICE0405*A2R-404a 23 60 - 35 175 - 400 35 15 - 26 5.5 220-240/50/1
ICE0405*W2R-404a 16 60 - 35 250 35 14 - 20 5.5 220-240/50/1
ICE0405*A2R-404a 23 56 - 31 200 - 400 38 17 - 23 5.5 220-240/50/1
ICE0405*W2R-404a 13 54 - 34 250 41 15 - 17 5.5 220-240/50/1
ICE0405*A3R-404a 23 56 - 31 207-400 38 16 - 22 5.5 220-240/50/1
ICE0405*W3R-404a 13 57 - 34 250 41 14 - 17 5.5 220-240/50/1
ICE0525*A1 R-404a 21 60 - 35 175 - 400 35 15 - 26 5.5 220-240/50/1
ICE0525*A2 R-404a 21 60 - 35 175 - 400 35 15 - 26 5.5 220-240/50/1
ICE0525*A3R-404a 21 55 - 38 200 - 400 46 13 - 18 5.5 220-240/50/1
ICE0605*A1 R-404a 32 60 - 35 175 - 400 35 13 - 21 5.5 220-240/50/1
ICE0605*W1 R-404a 14 60 - 35 250 35 14 - 21 5.5 220-240/50/1
ICE0605*R1 R-404a 160 60 - 35 192 - 400 35 14 - 22 5.5 220-240/50/1
ICE0605*A2 R-404a 22 60 - 35 175 - 400 35 13 - 21 5.5 220-240/50/1
ICE0605*W2 R-404a 14 60 - 35 250 35 14 - 21 5.5 220-240/50/1
ICE0605*R2 R-404a 160 60 - 35 240 - 400 35 14 - 22 5.5 220-240/50/1
ICE0605*R3 R-404a 132 60 - 35 240 - 400 35 14 - 22 5.5 220-240/50/1
ICE0605*A3R-404a 22 50 - 46 200 - 400 35 13 - 18 5.5 220-240/50/1
ICE0605*W3R-404a 14 47 - 45 250 32 14 - 16 5.5 220-240/50/1
ICE0605*R4R-404a 132 45 - 43 240 - 400 35 15 - 18 5.5 220-240/50/1
ICE0805*A1 R-404a 41 60 - 35 175 - 400 35 11 - 20 7 220-240/50/1
ICE0805*W1 R-404a 29 60 - 35 250 35 10 - 14 7 220-240/50/1
ICE0805*R1 R-404a 240 60 - 35 192 - 400 35 10 - 17 7 220-240/50/1
ICE0805*A2R-404a 27 60 - 35 175 - 400 35 11 - 20 7 220-240/50/1
ICE0805*W2R-404a 24 60 - 35 250 35 10 - 14 7 220-240/50/1
ICE0805*R2R-404a 240 60 - 35 240 - 400 35 10 - 17 7 220-240/50/1
ICE0805*R3R-404a 176 60 - 35 240 - 400 35 10 - 17 7 220-240/50/1
ICE1005*A1 R-404a 50 60 - 35 175 - 400 35 10 - 17 7 220-240/50/1
ICE1005*W1 R-404a 32 60 - 36 250 36 9 - 14 7 220-240/50/1
ICE1005*R1 R-404a 240 60 - 35 192 - 400 35 9 - 15 7 220-240/50/1
ICE1005*A2R-404a 33 60 - 35 175 - 400 35 10 - 17 7 220-240/50/1
ICE1005*W2R-404a 24 60 - 36 250 36 9 - 14 7 220-240/50/1
ICE1005*R2R-404a 240 60 - 35 240 - 400 35 9 - 15 7 220-240/50/1
ICE1005*R3R-404a 176 60 - 35 240 - 400 35 9 - 15 7 220-240/50/1
ICE1405*A1 R-404a 108 60 - 35 175 - 400 35 13 - 21 11 220-240/50/1
ICE1405*W1 R-404a 28 60 - 35 250 35 12 - 18 11 220-240/50/1
ICE1405*R1 R-404a 240 60 - 35 192 - 400 35 14 - 19 11 220-240/50/1
ICE1405*A2R-404a 104 60 - 35 175 - 400 35 13 - 21 11 220-240/50/1
ICE1405*W2R-404a 25 60 - 35 250 35 12 - 18 11 220-240/50/1
ICE1405*R2R-404a 240 60 - 35 192 - 400 35 14 - 19 11 220-240/50/1
ICE2005*W1 R-404a 50 60 - 35 250 35 10 - 15 14 220-240/50/1
ICE2005*R1 R-404a 400 60 - 35 192 - 400 35 10 - 17 14 220-240/50/1

ICE Series General Information
Page A9
Installation Guidelines
Note: Installation should be performed by an ICE-O-Matic trained Service Technician.
For proper operation of the ICE-O-Matic ice machine, the following installation guidelines must be
followed. Failure to do so may result in loss of production capacity, premature part failures, and
may void all warranties.
Ambient Operating Temperatures
Minimum Operating Temperature: 50°F (10°C)
Maximum Operating Temperature 100°F (38°C), 110°F (43°C) on 50 Hz. Models.
Note: ICE-O-Matic products are not designed for outdoor installation.
Incoming Water Supply (See Plumbing Diagram for line sizing Page A10-A17)
Minimum incoming water temperature: 40°F (4.5°C)
Maximum incoming water temperature: 100°F (38°C)
Minimum incoming water pressure: 20 psi (1.4 bar)
Maximum incoming water pressure: 60 psi (4.1 bar)
Note: If water pressure exceeds 60 psi (4.1 bar), a water pressure regulator must be
installed.
Drains: All drain lines must be installed per local codes. Flexible tubing is not recommended.
Route bin drain, purge drain and water condenser drain individually to a floor drain. The use of
condensate pumps for draining water is not recommended by ICE-O-Matic. ICE-O-Matic assumes
no responsibility for improperly installed equipment.
Water Filtration: A water filter system should be installed with the ice machine.
Clearance Requirements: Self contained air cooled ice machines must have a minimum of 6
inches (15cm) of clearance at the rear, top, and sides of the ice machine for proper air circulation.
Stacking: If the ice machines are to be stacked, refer to the instructions in the stacking kit.
ICE-O-Matic does not endorse stacking air-cooled ice machines.
Dispenser Application: A thermostatic bin control kit must be installed if the ICE Series ice
machine is placed on a dispenser. A bin top may or may not be required. (Exception is the
CD400 Dispenser)
Electrical Specifications: Refer to the serial plate at the rear of the ice machine or the charts on
page A5, A6, A7 or A8.
Adjustments
Level the machine within 1/8 inch in all directions.
Check the bin control for proper adjustment, Page F9
Check the water in the water trough for proper level, Page D1
Check the ice bridge for proper thickness, Page F4
Check the cam switch adjustment. Page F8
Check the water regulating valve adjustment if water cooled, Page E2

ICE Series General Information
Page A10
Electrical and Plumbing Requirements: ICEU150, ICEU220, ICEU205 andICEU206

ICE Series General Information
Page A11
Electrical and Plumbing Requirements: ICEU150, 220, 225 and 226
Note: The ICEU150, ICEU220, ICEU225
and ICEU226 do not havea splash
curtain.
These models utilize a thermostatic
bin control in place of a mechanical
bin switch.

ICE Series General Information
Page A12
Electrical and Plumbing Requirements: ICEU300 and305
Note: The ICEU300 does not havea
splash curtain.
This model utilize a thermostatic bin
control in place of a mechanical bin
switch.

ICE Series General Information
Page A13
Electrical and Plumbing Requirements: ICE0250, ICE0400, ICE0500, ICE0606, ICE0806
and ICE1006 (30 Inch Wide Cubers)

ICE Series General Information
Page A14
Electrical and Plumbing Requirements: ICE1406, ICE1806, ICE2106 (48 Inch Wide Cubers)

ICE Series General Information
Page A15
Electrical and Plumbing Requirements: ICE0320 and ICE0520 (22 Inch Wide Cubers)

ICE Series General Information
Page A16
Electrical and Plumbing Requirements: ICE1606 Remote

ICE Series General Information
Page A17
Electrical and Plumbing Requirements: ICE1506 Remote

ICE Series General Information
Page A18
Remote Condenser Installation
For proper operation of the ICE-O-Matic ice machine, the following installation guidelines must be
followed. Failure to do so may result in loss of production capacity, premature part failure, and
may void all warranties.
Installation Guidelines
 Ambient operating temperatures: -20°F (-28.9°C) to 120°F (48.9°C)
 Maximum refrigerant line length: 60 ft. (18.29 Meters)
 Maximum vertical rise: 16 ft. (4.88 Meters)
 Minimum condenser height: ICE Series ice machine remote condensers must not be
installed more than 6 feet (1.3 meters) below the refrigerant line quick connects at the rear of the
ice machine. No part of the refrigerant lines, between the ice machine and the remote
condenser, should fall below this point. Condensers must have a vertical airflow.
Air Flow